4 link setup on stock chassis
 

Sorry if this has been asked before but does anyone have pictures of a stock mf with a 4 link setup? specifically where the links mount to the chassis

Thanks all

Re: 4 link setup on stock chassis
 

yes... there are. but me searching will be as useful as you searching. i dont have any pics right now of one. maybe i can find an old one...

Trail Force Photos by mjderstine | Photobucket

here are some pics. but these are two short side axles. supershafty makes a offset mount for the stock width axles. check out his site at Super Shafty Kyosho Axle Mods - Super Shafty

Re: 4 link setup on stock chassis
 

Cool thanks for the help

Re: 4 link setup on stock chassis
 

If you drill some holes in the chassis above the lower mount holes, these will be for the upper links. Make the holes so the links will be parallel to the lowers, but make some adjustability for them. The upper links will also need to be mounted on the inside of the chassis. The lowers can stay where they are stock. Then get yourself some Super Shafty shark fins and away you go. I have a modified chassis if you're interested.

Re: 4 link setup on stock chassis
 

PM sent. Thanks

Re: 4 link setup on stock chassis
 

This is an OLDDDDDDD 4 link I did
http://i17.photobucket.com/albums/b8...4Link3size.jpg
http://i17.photobucket.com/albums/b8...ormtResize.jpg
Build thread of another 'outside the box' version
http://www.rccrawler.com/forum/kyosh...ete-build.html

Re: 4 link setup on stock chassis
 

holy spur gear batman!

Re: 4 link setup on stock chassis
 

OOOOOOOOOld school:ror: