03-24-2012, 02:04 PM | #1 |
Pebble Pounder Join Date: Nov 2005 Location: united kingdom
Posts: 156
| rc4wd beast
after receiving this from dale (such a kind man) i have decided to spend the day on it and get it sorted still quite a few things to finish but it is now a runner the wheels are stanard rims with cut iroxs all round the next thing was to swap out the 2 speed gearbox and fit axial trann and skid which were aer direct fit and fit axial hexes next onto the body it was half done when i got it but managed to find some of the missing bits and with a little help from grimster it has turned out like this(cheers dave) now its a roller and of course the articulation shot all electrics are now in tekin rs with a 21t motor and traxxas digital servo so gonna test ot tomorrow and see how it goes still got things to finish like winch on rear bed(cheers chris) etc etc etc |
Sponsored Links | |
03-24-2012, 03:00 PM | #2 |
Quarry Creeper Join Date: Dec 2009 Location: Honolulu
Posts: 428
| Re: rc4wd beast
That is a beast! I like it!
|
03-28-2012, 11:11 PM | #3 |
I wanna be Dave Join Date: Dec 2009 Location: Outside DC
Posts: 2,997
| Re: rc4wd beast
I'm digging it! Big and really badass looking! |
03-28-2012, 11:13 PM | #4 |
Quarry Creeper Join Date: Dec 2008 Location: Santa Mira
Posts: 342
| Re: rc4wd beast
Amazing!
|
03-29-2012, 01:22 AM | #5 |
Quarry Creeper Join Date: Apr 2011 Location: Waimanalo, Hawaii \m/
Posts: 426
| Re: rc4wd beast
I never did see lox cut befor, I like it!
|
03-29-2012, 07:50 AM | #6 |
Pebble Pounder Join Date: Nov 2010 Location: Northern NJ
Posts: 157
| Re: rc4wd beast
I love big oilfield trucks !!!
|
03-29-2012, 08:09 AM | #7 |
I wanna be Dave Join Date: Oct 2006 Location: Martinsburg WV
Posts: 2,781
| Re: rc4wd beast
Damn you are one lucky barstard. I've wanted a Beast since RC4WD first made them. Such a steep entry fee though. Not in my budget now. Hell, I'd be so stoked just to be able to pop for 3 Blackwell axles and start from scratch with them. Great body choice... Looks like with a little front fender trimming and maybe some alteration to the step boxes, you could make enough clearance to lower the body substantially. Like 1/2", 3/4" even. I think it would look a lot better, but thats just me. I see a KILLER recovery rig developing out of this thing. Winch and short boom on a back platform, and a bunch of tools and stuff. I've seen 1:18th scale portable welders, oxy/acetelyne rigs, toolboxes, etc. that look big enough to pass for small 1:10th scale. That would be a fun project... Last edited by Big Mike; 03-29-2012 at 08:22 AM. |
04-23-2012, 02:44 PM | #8 |
Pebble Pounder Join Date: Feb 2006 Location: In a rock crawler down by the river
Posts: 118
| Re: rc4wd beast
Nice looking rig I'm thinking about building a 2.2 Pinzgauer 6x6 with worminators. Might end up using a Unimog body that I have laying around if I get too lazy to fab a Pinzgauer body. |
04-23-2012, 06:27 PM | #9 |
Quarry Creeper Join Date: Dec 2011 Location: Flat Hills of Florida
Posts: 440
| Re: rc4wd beast
looking great , I just started a beast build myself ! Q; Is that a wraith or scx10 cenetr skid ? Last edited by BONDONUTZ; 04-23-2012 at 06:29 PM. |
04-24-2012, 12:14 AM | #10 |
Pebble Pounder Join Date: Nov 2005 Location: united kingdom
Posts: 156
| Re: rc4wd beast
scx10 skid my friend i have since gone back to the original one but i am changing all the link ends so might go back to the scx one as there is less play in the axial rod ends compared to the rc4wd ones i must say i have ran it a few times now and am airly happy with it i am going to change the shocks too thanks for more great comment Last edited by THX_138; 04-29-2012 at 08:37 AM. |
05-01-2012, 08:16 PM | #11 |
Rock Crawler Join Date: Nov 2010 Location: roanoke
Posts: 865
| Re: rc4wd beast
i love the axles!
|
rc4wd beast - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RC4WD 6X6 Worminator -or- Beast | LumTheMad | Chit Chat | 7 | 07-03-2012 03:07 PM |
RC4WD Beast 6x6 Truck Build (Done) | Racer4Life | Multi Axle Rigs | 21 | 09-09-2011 05:52 PM |
| |