Re: Derstine's HotRod willys it was cool seeing this run last weekend. Here are pics of the willys from the PA jeep show i was telling you about. it might give you some ideas. http://carzz.co/images/videos/226.jpg http://i229.photobucket.com/albums/e...ps07696c9a.jpg There is even a video of it. https://www.youtube.com/watch?v=_qU1ALliaWE Keep up the good work! |
Re: Derstine's HotRod willys Thanks man. That looks incredible. It certainly gives me some ideas for the grill area. |
Re: Derstine's HotRod willys http://i628.photobucket.com/albums/u...122020a_01.jpghttp://i628.photobucket.com/albums/u...0129122221.jpghttp://i628.photobucket.com/albums/u...0121118_01.jpg If you would have taken your time you could have popped the valve covers off and took the motor apart and installed the motor on the in side. Then mount the motor to the back of the block with the HPI gear reduction on the out side. Then run a drive shaft to the rear end. I have done a few of these 1:6 and 1/12 scale blocks. there a lot of fun and people can't believe how real they look. This jeep is going to be real eye candy when it's done! The last picture shows the parts that I left off so that heat wasn't trapped. I thought of using a fan if heat was a issue. |
Re: Derstine's HotRod willys Glad to see this is getting closer. Very cool build! I've got an idea for the front clip that came off it... Thought I'd tempt you:mrgreen:http://i1234.photobucket.com/albums/...0e1aa04b20.jpg |
Re: Derstine's HotRod willys yeah, actually lots of updates coming tomorrow. |
Re: Derstine's HotRod willys I will be holding my breath! |
Re: Derstine's HotRod willys promised updates are coming henceforthrightwidthednessish... have finally been able to spend some time on this. its really going to be built to be a show piece that i can take out and run when i want too. I was able to get my hands on some better scale looking parts for this thing. I have since installed. scale wraith knuckles and C-hubs. rear AR60 SSD steelies. guess we can start at the front and go backwards. I rebuilt the front axle assembly using nothing but the best ingenuity. albeit from VP which is always the best. The "axle" as it were is also rebuilt using 1/4" steel. the 3/8 was just too thick. Getting all the angles just right for the wraith scale knuckles was difficult but not impossible. just had to draw some pictures. http://i63.photobucket.com/albums/h1...pseup6ptfd.jpg http://i63.photobucket.com/albums/h1...pspwdju7vi.jpg http://i63.photobucket.com/albums/h1...psjopvgzdu.jpg starting the install of that aforementioned axle. i brazed on the link mounts as well. this was done so that i can easily make a 4 link setup in the front. http://i63.photobucket.com/albums/h1...psmjrjuoco.jpg http://i63.photobucket.com/albums/h1...pszzv0vmb1.jpg also got some rear Bomber trailing arms. i have some nice UCFab ones on the way. its gonna look great. http://i63.photobucket.com/albums/h1...pslm0t6egj.jpg http://i63.photobucket.com/albums/h1...psmotpoxar.jpg nothing too fancy in the rear. i got the AR60 in the back, and 4 linked. notice the crossbar between the lower links. this also acts a sway bar. i needed because of how the shocks were mounted. either way a solid rear axle isnt a bad thing here. should help keep the power down. http://i63.photobucket.com/albums/h1...psmjg7uqzp.jpg flex! http://i63.photobucket.com/albums/h1...psbhqqtaqf.jpg ok, onto the body, put some styrene on the front. http://i63.photobucket.com/albums/h1...psap5sxpaa.jpg tight fit around the motor http://i63.photobucket.com/albums/h1...pstskqmxw2.jpg had to trim the grill to get this on here, but i did, and it should look awesome when done. http://i63.photobucket.com/albums/h1...pshjirdnlg.jpg now all i gotta do is get the steering back on it. and complete the body. got some scale diamond plating that should help accent lots of parts. |
Re: Derstine's HotRod willys Holy smokes, that is incredible! Wow. |
Re: Derstine's HotRod willys That's some engineering there mj "thumbsup" |
Re: Derstine's HotRod willys Glad to see more progress! Keep it up! |
Re: Derstine's HotRod willys head ovet to ebay, and search "1/6 engine" and start deciding. |
Re: Derstine's HotRod willys got a little more done. got some of the stoppy things for the front wheels. they just needed some extra detail. i had to make a tiny little bracket, but before that i had to hack saw into a brand new bracket for the VP brake kit. not an easy thing to cut into fresh outta the package. had some tiny 2mm scale bolts to make it all look good too. http://i63.photobucket.com/albums/h1...pszetyq07k.jpg http://i63.photobucket.com/albums/h1...psixdnoo9w.jpg http://i63.photobucket.com/albums/h1...psskhtvlfc.jpg also got the UC Fab Bomber control arms on there too! http://i63.photobucket.com/albums/h1...psrvplhnr6.jpg http://i63.photobucket.com/albums/h1...pshwn0v5lf.jpg http://i63.photobucket.com/albums/h1...pswclqg4kf.jpg http://i63.photobucket.com/albums/h1...pscufkoltv.jpg and some wheel speed! http://i63.photobucket.com/albums/h1...psum2kcvpo.mp4 |
Re: Derstine's HotRod willys Coolest use of trailing arms EVER! |
Re: Derstine's HotRod willys This thing is super cool. interested to continue to see updates. Wes |
Re: Derstine's HotRod willys Nice! I've been waiting for some updates on this. Cool front axle setup and the brake rotors are a nice touch. |
Re: Derstine's HotRod willys Ya, I like them brake rotors too! "thumbsup" |
Re: Derstine's HotRod willys Can't wait to see this make a run down Bob's ravine in the spring! :mrgreen: |
Re: Derstine's HotRod willys I like it! |
Re: Derstine's HotRod willys Quote:
Quote:
you done being burnt out yet man? |
Re: Derstine's HotRod willys almost |
All times are GMT -6. The time now is 05:17 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com