Servo problem - HELP!!

[fiveo]

My servo got locked tonight , wheels are stuck all the way to the left and I am getting no movement or sounds. Is the servo burned up? Has this happened to anyone else?

[xd3athstalk3rx]

I don't know much bout that issue but try unscrewing the case for esc and un plug servo than back in if no go check all ur steering trim on controler if no luck upgrade to a hitec hs 55 servo it's 20 bucks plus softer wire less suspension binding from stiff wire Hope it helps

[willy1106]

If u have another car unplug and swap servos. If the bad servo switches cars the servo is bad if the same car still won't move the servo the rx is bad

[krono7s]

i just went through that problem. i went and bought a hitec hs55 and problem solved... the hs55 was $12 at my LHS

[fiveo]

Yea, I just unplugged, replugged, tried taking the servo saver off, nothing works. I switched the truck to full droop last night, you don't think that had anything to do with it, do you??

However, on a good note, I wanted to change out the servo so I now have an excuse. LHS, here I come.

[JeepinOR]

Originally Posted by fiveo

I switched the truck to full droop last night, you don't think that had anything to do with it, do you??

While you were drooping your rig, you didn't disconnect the servo and swing it around in circles over your head, did you? That might do it!

Nah - just a coincidence. I suppose it's possible you pulled the wires a bit while you were messing with the front; if the inside connections/soldering wasn't good to begin with...
If you're waiting and have nothing better to do, you could open up the servo case and check out the insides. It sounds like it's about toast anyway - you could get lucky and find a fix.

[fiveo]

Can I use the Spektrum DSP75 on the Micro?