Barrel nuts !!!!!!!!!!!!!I'm going nuts Hi all can someone please help as i'm going crazy. i got the crawler x widners the other day and have since stripped out the barrel nut. i know i'm a wally. Anyway i need to get some new ones and i have only found the ones on rc4wd.com. They will cost $12 shipping to the UK so thats no good. So do i have to get some more widners or is there somewhere to just get the nuts. Any links will be most welcome I;m using HR beadlocks and trekker shafts with miniQLO tyres if thats any help Thanks to all who take the time to reply "thumbsup" |
Maybe search mcmaster.com or Google for them. They should be m2 x .5 thread, iirc....other than that, I dunno. Sorry. |
Quote:
|
This doesn't really help you now I guess. But I found the best way to make sure you don't strip them is to thread them on first and get them nice and straight. Then put the widener and wheel on and snug it up. Also, if you try to put them on too tight they will bind everything up. I have not found barrel nuts anywhere except for the ones included with the couple of widener kits as that's the only time you need them. I think you will need to order a new set of wideners, the bright side is at least then you have spares. |
Or you could just get a hold of BLADE. Maybe crawlerx sells replacements. Can't hurt to ask. |
I also had a similar experience. The wheels always self-loosened, so from me always re-snugging the nuts...POP, they broke. Any way, all my wheel widening dilemas went away when I got Losi #LOSB1737 No more weak, "unique-nuts". |
Quote:
It is strange that you even need the barrel nuts with your axleshaft setup. My Trekker uses crawlerx wideners with enough axle thread left to use the stock wheelnuts...withHR wheels. You must have stripped it out tightening it to get the wheel tight, all the while the shoulder of the shaft wouldn't let the barrel go any further? For repairing the stripped one, a dab of super glue ought to fill the threads and let you start fresh. |
Quote:
|
BWD supplies some nice ones with his wheel exenders for the Micro, why don't you check out Don's site for barrel nuts. |
I just got pmed from blade at crawlerx and they are sending me some new ones so a very big thankyou to them know that is what I call great customer service "thumbsup" |
i let a buddy borrow my crawler and he lost one of my bwd wheel nuts, i have been emailing don ever since an d havent recieved a response. if anyone gets some info on this, pass it on... FYI crawlerx ones DONT fit bwd vertex' they are too short. "thumbsup" |
All times are GMT -6. The time now is 02:35 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com