|
| LinkBack | Thread Tools | Display Modes |
10-30-2011, 06:20 PM | #1 |
I wanna be Dave Join Date: May 2010 Location: Stowe
Posts: 3,987
| How much juice can you run through a stock Micro ESC?
I searched and was unable to find out. Many of you have been putting 2C 350Mah 7.4v, are you running stock or another ESC?? Also it has been written that the micro ESC has a lipo cutoff is this true. Thanks, John |
Sponsored Links | |
10-30-2011, 06:32 PM | #2 |
RCC Addict Join Date: Oct 2009 Location: In the mancave...
Posts: 1,038
|
im running a 2S 350mah lipo. losi has not come out right and say it does have alipo cutoff. but, its there. when running a nimh pack, the green light is on, on the esc. when running lipo, the green and red lights are on, on the esc. when you hit the cut off, you have no or very minimal throttle. i've had the cutoff go off on a fully charged nihm pack a few times. when they are fully charged on a good charger, the esc thinks its a dead lipo pack..
Last edited by rik; 10-30-2011 at 06:34 PM. |
11-01-2011, 02:41 PM | #3 |
Quarry Creeper Join Date: Jul 2005 Location: Utah
Posts: 261
|
The answer is Yes... it has a lipo cutoff. It also has a high voltage cutoff as well. I have a 250mah 11.1 volt lipo that my bro-in-law tried on his micro and it wouldn't even go. The steering would work, but the motor wouldn't do anything |
| |