Micro trekker whoas
 

He all, jist added a micro trekker to the collection. Super stoked about it found a brand new never run one. Put a battery in it, transfer case locked up??? Pulled it apart and the little gear inside the tranny has a crack in it! Anyone have a clue where I can find one?

Thanks

Re: Micro trekker whoas
 

Just sent you a private message.

Re: Micro trekker whoas
 

Did you manage to find a replacement? Please let me know.
Thanks!

Re: Micro trekker whoas
 

Didn't find anything new, a buddy found a used truck with roasted electronics I'm gonna pilfer for parts. I only need the small 20t one. Hopefully the guy ships it. Sorry wish I had better news... if i find new ones I'm gonna buy a couple just for peace of mind never thought it would be this hard to find.

Re: Micro trekker whoas
 

Skip the plastic & go with a brass gear.
https://shop.kkpmo.com/product_info....--20teeth.html

http://imageshack.com/a/img923/2230/R8mUiH.jpg

Re: Micro trekker whoas
 

Hello, on this subject, is there a brass replacement for the motor pinion available online? I have two motors with stripped pinion gears.

Re: Micro trekker whoas
 

Yes, there’s plenty of 8t, 9t, and 10t pinion gears online. I ordered some on eBay before I ended up going with a Danally motor that already has one installed.

Re: Micro trekker whoas
 

Ive been looking to do this ever since I saw your thread on that 4s lipo Racing crawler you were building. I remember you went with a HR Aluminum 50t spool (well spur on the micro T anyway) gear originally. Where did you get that brass 50t and how did you cut out the square shape? I’m assuming you used a small drill bit to make the initial cut points, but I don’t think I have anything that could finish the shape when it comes to cutting. Thanks for any info. Time to order some gears

Re: Micro trekker whoas
 

Chevy55-
Is it this one?

https://shop.kkpmo.com/product_info....--50teeth.html

Re: Micro trekker whoas
 

That's the one "thumbsup" I get it with a 4mm id. I use a file to square it up.

Re: Micro trekker whoas
 

Thank, man! Will do. I’ll post when I’m done. Hopefully it comes out as good as yours! I’m currently working on all metal links for my trekkers at the moment. Just finished the steering links. Once I’m done with the rest of them I’ll switch to gear mode

Re: Micro trekker whoas
 

Dang it, just found a plastic one or I certainly would be went with the brass. Paid 20 freaking dollars for it too just cause I had a hard time finding it... Dang it.

Thanks though good info here, maybe it'll help someone else out when they search micro crawler / trekker gears

Re: Micro trekker whoas
 

Ordered those brass ones for both my Trekkers. Was like two weeks ago, so hopefully I get them soon. No shipping info yet

Re: Micro trekker whoas
 

did you oever receive them? Trying to located and stock parts for 2 complete trans for backups as these things are getting hard to source out

Re: Micro trekker whoas
 

Once I get my brass ones installed I’ll have two sets of the stock 20t and 50t gears u are looking for.

Re: Micro trekker whoas
 

Good info and source!

Are the brass gears pretty much bullet proof in a micro rig?

Sent from my SAMSUNG-SM-G900A using Tapatalk

Re: Micro trekker whoas
 

Not a big deal (at all) but the title should be 'woes' not 'whoas' :mrgreen: