|
| LinkBack | Thread Tools | Display Modes |
12-11-2008, 03:32 AM | #1 |
Rock Crawler Join Date: Apr 2008 Location: On the Snap on truck
Posts: 736
| $40+ of brass and 20 minutes later 1 oz of brass ,just gotta drill/counter sink the brass then drill tap the Eritex wide offset MRC beadlocks Still have not decided if I am gonna bore so that I can take the rim off without taking off the weight,the fit is so tight that I can not get the brass out without taking the outer ring off :( I was gonna do stainless, but could not find a piece,till after I ordered the brass. If you like the concept , Hit Eritex up and ask,beg, plead him to make them in stainless,he cannot do brass due to the type of coolant he uses,so dont even ask, unless your gonna go pay for a different coolant and spend the time cleaning out the haas . Oh sorry the second pix is crappy Last edited by Joat; 12-11-2008 at 04:09 AM. Reason: Because I am tired |
Sponsored Links | |
12-11-2008, 06:41 AM | #2 |
TN State Champ 11,12,13 Join Date: Oct 2008 Location: KTM Talk.com
Posts: 1,796
|
Those look awesome. I am always surprised at the level of craftsmanship displayed on this forum. |
12-11-2008, 08:07 AM | #3 |
RCC Addict Join Date: Nov 2008 Location: never been
Posts: 1,317
|
if gerame gonna do it they could easily put a hole to access the wheel nut, stainless gonna be killa.
|
12-11-2008, 09:31 AM | #4 |
Newbie Join Date: Sep 2008 Location: Pleasant Grove
Posts: 9
|
so sick will anybody be able to but them and how much
|
12-11-2008, 09:39 AM | #5 |
RCC Addict Join Date: Nov 2007 Location: in the woods
Posts: 1,915
|
I am checking my wholesalers for SS prices. No promises at this point |
12-11-2008, 10:33 AM | #6 | ||
Rock Crawler Join Date: Apr 2008 Location: On the Snap on truck
Posts: 736
| Quote:
Quote:
I knew people would be intrested | ||
12-11-2008, 10:59 AM | #7 |
I wanna be Dave Join Date: Jan 2004 Location: Detroit
Posts: 3,583
|
Gerame, how come the MRC beadlocks are not on your site...or is it I just can't find them?
|
12-11-2008, 11:10 AM | #8 |
Rock Crawler Join Date: Apr 2008 Location: On the Snap on truck
Posts: 736
| |
12-13-2008, 04:54 AM | #9 |
Rock Crawler Join Date: Apr 2008 Location: On the Snap on truck
Posts: 736
| Had some free time, bored to have axcess to wheel nut, counter sunk brass drill/tap Eritex beadlocks. wheel weight, Eritex wide offset beadlocks, Losi blue claws and memory foams = 5.2oz, with out brass 4.4oz, that's only a brass insert on the outside, plan on doing ones for the inside so prob add another 1.0oz since the inside ring is narrower then the outside Last edited by Joat; 12-13-2008 at 04:59 AM. |
| |