RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Losi Mini-Rock Crawler (http://www.rccrawler.com/forum/losi-mini-rock-crawler/)
-   -   RCROCIN's Mini Juice (http://www.rccrawler.com/forum/losi-mini-rock-crawler/302993-rcrocins-mini-juice.html)

RCROCIN' 03-01-2011 09:10 PM

RCROCIN's Mini Juice
 
I purchased my mini used of RCC a few months ago. It needed a new chassis and some new links. I have all the other Y-town custom chassis already so it only made sense to go with the mini juice. Chassis was top notch. I made up new links out of delrin. I also replaced the shocs with the little Losi crawler shocks. The rig has performed awesome so far I managed to finish 5th at Motorama which I was very pleased with. Specs and pics posted below.

Losi MRC - BDW Motor Plate - Traxxas gear for front axle - RC Bros Knuckles - MIP drive shafts
Y Town Custom's Mini Juice chassis with Home made delrin bent links
Mamab 25 ESC - Castle BEC
Hitech Servo 5645
LH Pro Comps - Love these wheels
Rovers - Awesome Tires
Holmes Hobbies Motor
4PK

http://i774.photobucket.com/albums/y...e/IMG_0089.jpg

http://i774.photobucket.com/albums/y...e/IMG_0088.jpg

http://i774.photobucket.com/albums/y...e/IMG_0091.jpg

http://i774.photobucket.com/albums/y...e/IMG_0093.jpg

http://i774.photobucket.com/albums/y...e/IMG_0099.jpg

http://i774.photobucket.com/albums/y...e/IMG_0118.jpg

4xFord 03-02-2011 10:33 AM

Lookin Good! "thumbsup"

Jslick 03-02-2011 11:59 AM

Can't wait to comp with you on Sun."thumbsup"

RCROCIN' 03-03-2011 01:32 PM

Quote:

Originally Posted by 4xFord (Post 2961518)
Lookin Good! "thumbsup"

THanks working good also:mrgreen:

Quote:

Originally Posted by Jslick (Post 2961638)
Can't wait to comp with you on Sun."thumbsup"

Yeah buddy "thumbsup" I hope the weather holds up :cry:

RCROCIN' 03-06-2011 07:03 PM

Here is the wieght, shock and ride hieght setup on my mini. It has been performing extremely well. Very predictable and stable. The rovers have stock foams which at first seemed a bit soft however I have been getting excellent performance out of them. With that said I am in no rush to change them out. We had a comp today and the rocks were wet. The rovers hooked up like it was dry. I was very impressed.

I decided to switch out my servo after the comp today. The H5645mg was not performing well. I swapped it with my Savox servo from my Scaler. Model (SC 1256tg - 277oz torque). It has been working fine on my scaler buy have not really worked like I will with the a crawler. I will let you know how it performs.

The Mini Juice chassis was very easy to setup and the break over is a real advantage.

Shocks
Rear Down travel limited 5/8"
Front Down Travel limited 1/2"

Ride Hieght
Back of skid - 2 2/3"
Front of Skid - 2"

Mini no Wheels
http://i774.photobucket.com/albums/y...e/IMG_0138.jpg

Front Wheel Wieght
http://i774.photobucket.com/albums/y...e/IMG_0137.jpg

Rear Wheel Wieght
http://i774.photobucket.com/albums/y...e/IMG_0136.jpg

Total Wieght
http://i774.photobucket.com/albums/y...e/IMG_0141.jpg

mhflies 08-03-2011 09:23 PM

Quote:

Originally Posted by RCROCIN' (Post 2969969)
Here is the wieght, shock and ride hieght setup on my mini. It has been performing extremely well. Very predictable and stable. The rovers have stock foams which at first seemed a bit soft however I have been getting excellent performance out of them. With that said I am in no rush to change them out. We had a comp today and the rocks were wet. The rovers hooked up like it was dry. I was very impressed.

I decided to switch out my servo after the comp today. The H5645mg was not performing well. I swapped it with my Savox servo from my Scaler. Model (SC 1256tg - 277oz torque). It has been working fine on my scaler buy have not really worked like I will with the a crawler. I will let you know how it performs.

The Mini Juice chassis was very easy to setup and the break over is a real advantage.

Shocks
Rear Down travel limited 5/8"
Front Down Travel limited 1/2"

Ride Hieght
Back of skid - 2 2/3"
Front of Skid - 2"

Mini no Wheels
http://i774.photobucket.com/albums/y...e/IMG_0138.jpg

Front Wheel Wieght
http://i774.photobucket.com/albums/y...e/IMG_0137.jpg

Rear Wheel Wieght
http://i774.photobucket.com/albums/y...e/IMG_0136.jpg

Total Wieght
http://i774.photobucket.com/albums/y...e/IMG_0141.jpg

where the hell can i buy that chassis? ive looked all over!

Robotboy 08-03-2011 10:16 PM

Quote:

Originally Posted by mhflies (Post 3216157)
where the hell can i buy that chassis? ive looked all over!

2 second search found this for ya:
http://www.rccrawler.com/forum/showthread.php?t=272958 "thumbsup"


All times are GMT -6. The time now is 06:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com