Getting my very pwn crawler!!
 

After playing iwth my boyfriends Super I have been bit by the Crawling bug!!! I have been looking and going over every possible option and finally got one off Ebay. Its a Losi Mini and it has all this stuff
You are bidding on a losi mini crawler with upgrades comes with servo and motor no other electronics

• Homes hobbies brushed crawler motor
• losi steel lockers
• losi threaded aluminium shocks
• integy high clearance bent links
• full size futaba servo
• proline body
• alumium rear axle ends
• aluminium front stearing knuckles

Im so very exctied!!

Tiff "thumbsup"

Post some pics when you get it "thumbsup"

Here are some from the eBay listing. http://i463.photobucket.com/albums/q...s/3072d9c1.jpg
http://i463.photobucket.com/albums/q...s/8f3dd940.jpg
http://i463.photobucket.com/albums/q...s/1a459cf2.jpg
http://i463.photobucket.com/albums/q...s/113004b5.jpg
http://i463.photobucket.com/albums/q...s/02c6fb2e.jpg



And here's my truck :)
http://i463.photobucket.com/albums/q...s/IMG_0562.jpg

Too late, I just bought it ;) Just kidding that would be mean.
Looks good other than the bright yellow wheels...

Shocks, metal diff lockers, servo, servo plate, bent links... all things that you would upgrade on a new one right away anyways so its nice that the basic mods are already done.

LOL I LIKE the yellow!! My boyfriend thinks they need to be relaced too. He has already found some he wants to get. Looks like they might have to go.

Welcome to the crawling addiction. LOL

The MRCs are a lot of fun!

I havent ever used the mini so Im very very excited!! Plus I just got the tracking number so it's on the way!!

I use my boyfriend Super Crawler and have a blast with his.

ITS HERE!!!! I took all the stickers off the body and once my boyfriend gets home we can work on it together and get it running!!

Ok due to everyones urging I got new wheels :lmao: They look MUCH MUCH better, you everyone was right!! Now we just need to install the Brushless system that we got, get the lipo set up and I will finally be able to run the little monster!

I also took off the stickers that were all over the body it looks so much better! I am thinking of getting a cage and painting that pink.

Tiff

Ikaikas Kitten!!! <3

My first introduction to crawling was with an MRC, so I have a bit of a fondness for them. Good luck with it, and post up the changes you make "thumbsup"

Will do!! I will take some pics tonight, I'm pretty proud I did the wheels and tires once my boyfriend showed me what to do I did more of the work :) As a girl with little to no experiance except with racing dirt bikes and snowmobiles I think that I am catching on pretty quick. The tires were streached out a bit from being on those wheels that were too big but I got them on the new wheels with some glue :)

if you are really into this you should check this out http://www.rockcandyrcc.com

Well not like it has taken forever!! With going to the comps with my guy and getting my puppy AND working on the MRC I haven't posted at all. Here is the new MRC!! http://i463.photobucket.com/albums/q...s/f3e27fe3.jpg

http://i463.photobucket.com/albums/q...s/8a174049.jpg

http://i463.photobucket.com/albums/q...s/abba6322.jpg

Now that its all put together we are getting a weird glitchy interfearance with it I'm pretty bummed

are u running 2.4ghz or fm and or am

I have a 2.4ghz We put a castle BEC in it and have the Holmes Mini. It will run fine then will stall before it accually goes foward. That's the best way I can describe it. We were thinking that maybe the Motor is going out? I don't know :( (sad face) It was running just fine after putting the Castle in it then all of a sudden it went weird on us.

sounds like either the BEC went bad or possibly its wired wrong. check the wiring on the bec make sure you have the red wire from the ESC either cut or pulled from the connector and try that if its already disconnected try hooking it back up to see if that fixes it. i have to run mine with a UBEC and the internal BEC in the ESC or mine glitches like that too.

Thanks a ton I will check that for sure!

Thanks for the suggestion we tried that and we are going to get a new ESC. The man thinks he may have fried it when he soldered it.

He ADMITTED that to you??? Wow...you guys must be young. Us older cats woulda said something like, "yea sweetie...the flux capacitator arched over the 2.1 jigawatt ceiling...causing the shiboobity relay to dechargify at the stinkerpin junction. All in all baby...taint MYYY fault!!!"

i ran a bec on mine and it kept stalling and then i noticed the esc was getting really hot im running a hitec 7955tg and i took the bec out and have it run off of just the internal one and i does not stall out of get hot it might be the bec or the esc is not happy with how much power ur pulling through it