ECX Temper scale test and tune My awesome son bought myself and his sister each one of these great trucks. Since it's been unseasonably warm for Ohio, Merry early Christmas! I'm experimenting on a somewhat more scale approach. In trial and error mode right now but have it close. Made frame extensions to get the shocks more upright to help with TT. http://images.tapatalk-cdn.com/15/12...86a6852f5b.jpg http://images.tapatalk-cdn.com/15/12...4c9793167e.jpg It only lost a very little amount of articulation. It might still be too much once full size body is on. http://images.tapatalk-cdn.com/15/12...6e772c26ab.jpg http://images.tapatalk-cdn.com/15/12...3a0b75d5e0.jpg You can see I cut original battery/rx tray in two pieces to retain the shock mounts. Still deciding on rx and battery placement. http://images.tapatalk-cdn.com/15/12...4e4667be0e.jpg Preliminary tests around the house shows I'm close with this setup. I think the shocks need thinner oil and I need to lower them just a bit more. Hopefully tonight. My daughter really likes old Fords and my LHS has this one. I matched the wheelbase up and it's real close. I'll make longer rear links if need be to get it perfect. http://images.tapatalk-cdn.com/15/12...dac8e66837.jpg I'm testing on my truck and once I'm happy I'll duplicate on hers. |
Re: ECX Temper scale test and tune Picked up the 66' F100 body for my daughters tonight. Need to extend the rear links about 18mm to make the wheelbase correct. Tomorrows project. http://images.tapatalk-cdn.com/15/12...c01d876293.jpg http://images.tapatalk-cdn.com/15/12...45bb8be4be.jpg |
Re: ECX Temper scale test and tune Looks good! Got any measurements for the frame extensions? Looks like something I'd like to do to mine. Sent from my C6740N using Tapatalk |
Re: ECX Temper scale test and tune rehnjames, once I get it rolling I am taking it apart to paint the chassis flat black. I will get all the measurements of everything I did and post them with pics. "thumbsup" |
Re: ECX Temper scale test and tune Thanks Sent from my C6740N using Tapatalk |
ECX Temper scale test and tune Got the rear axle extensions done and wheelbase correct to body. I added 20mm to wheelbase. Used stock TLT1 chassis braces for the extensions. http://images.tapatalk-cdn.com/15/12...118f0a99c6.jpg For now I extended the three link. But I might make new tubes and four link it. I think this longer single post might be a weak link, time will tell. http://images.tapatalk-cdn.com/15/12...5bdf85d7a8.jpg Have the body mounted securely. So far no rubbing and plenty of flex. http://images.tapatalk-cdn.com/15/12...70eb991225.jpg http://images.tapatalk-cdn.com/15/12...97ddee2cff.jpg http://images.tapatalk-cdn.com/15/12...7c37463356.jpg Daughter says she wants the body to look it's age. This will be a first for me, weathering a lexan body. Done lots of searching and pretty sure I can pull it off. Stay tuned! |
Re: ECX Temper scale test and tune Have the chassis primered and painted satin black. http://images.tapatalk-cdn.com/15/12...48ab0d875c.jpg Used the sanding drum on a dremel for the rust holes. http://images.tapatalk-cdn.com/15/12...e67e85abfa.jpg http://images.tapatalk-cdn.com/15/12...c463e46f7a.jpg Put two coats of the closest rust color I could find, inside and outside. http://images.tapatalk-cdn.com/15/12...11fb793479.jpg Now two coats of gunmetal on outside. http://images.tapatalk-cdn.com/15/12...513f1d0b7b.jpg Let that dry until tomorrow. Then tape off for the pink she wants on. Then I will detail the rust holes and replicate some patina. |
ECX Temper scale test and tune After two days of body work my daughter says it's done..... http://images.tapatalk-cdn.com/15/12...a8d7529308.jpg http://images.tapatalk-cdn.com/15/12...637368f0fd.jpg http://images.tapatalk-cdn.com/15/12...ca3bbb00fc.jpg http://images.tapatalk-cdn.com/15/12...179bcd04ff.jpg http://images.tapatalk-cdn.com/15/12...5758b29f3d.jpg |
Re: ECX Temper scale test and tune Nice work, the patina turned out well! "thumbsup" I also like the wood stakes! |
Re: ECX Temper scale test and tune Added some scale accessories. http://images.tapatalk-cdn.com/15/12...7ddcaca7be.jpg Threw a quick paint job on my 72 K10 for now. Later I'm going to weather mine I think. http://images.tapatalk-cdn.com/15/12...8dfbd8ee92.jpg http://images.tapatalk-cdn.com/15/12...17ff4e9df5.jpg |
Re: ECX Temper scale test and tune And now for a full interior. The Walking Dead dudes look about perfect for these. In mock up stage. Waiting for some thicker styrene for floor. http://images.tapatalk-cdn.com/15/12...d9df433e28.jpg http://images.tapatalk-cdn.com/15/12...b17410cc16.jpg |
Re: ECX Temper scale test and tune Thanks! I'm going to ask to get this moved to the 1.55 scale forum. ordered wheels and tires today as that's where it is headed anyways...... |
Re: ECX Temper scale test and tune Interior coming along nicely. Think I have all the details finished. Now on to paint. http://images.tapatalk-cdn.com/16/01...6a42b1ea9f.jpg http://images.tapatalk-cdn.com/16/01...a03f94f812.jpg http://images.tapatalk-cdn.com/16/01...13c6960e35.jpg http://images.tapatalk-cdn.com/16/01...45b6398074.jpg |
Re: ECX Temper scale test and tune Nice work "thumbsup" |
Re: ECX Temper scale test and tune |
Re: ECX Temper scale test and tune |
Re: ECX Temper scale test and tune |
Re: ECX Temper scale test and tune |
Re: ECX Temper scale test and tune Looks better with the wagon wheels "thumbsup" |
Re: ECX Temper scale test and tune And I think it's finally finished. For now. http://images.tapatalk-cdn.com/16/01...3f028d2f29.jpg http://images.tapatalk-cdn.com/16/01...0545ae5d40.jpg http://images.tapatalk-cdn.com/16/01...e63d68bd60.jpg http://images.tapatalk-cdn.com/16/01...65fdb7d8dd.jpg http://images.tapatalk-cdn.com/16/01...84f6d9d1f1.jpg http://images.tapatalk-cdn.com/16/01...d2590311a1.jpg http://images.tapatalk-cdn.com/16/01...2138b1133f.jpg http://images.tapatalk-cdn.com/16/01...7605ff555f.jpg |
All times are GMT -6. The time now is 02:49 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com