My Losi Mini Scaler I never used my Mini any more so decided to make a scaler out of it. Had these frame rails forever can't remember where I got them. This is the Tamiya FJ body I bought for another project but it was to small. Still a ways to go to complete it. Had to buy a lot of hardware the 1/18 size stuff is harder to come by.https://uploads.tapatalk-cdn.com/201...b7c8e975cd.jpghttps://uploads.tapatalk-cdn.com/201...3ce8005e25.jpg Sent from my iPhone using Tapatalk |
Re: My Losi Mini Scaler Built a battery and electronics tray https://uploads.tapatalk-cdn.com/201...895d685963.jpghttps://uploads.tapatalk-cdn.com/201...bfebf8bd59.jpg Sent from my iPhone using Tapatalk |
Re: My Losi Mini Scaler https://uploads.tapatalk-cdn.com/201...d5fd3a50cd.jpghttps://uploads.tapatalk-cdn.com/201...fbb36bfd89.jpg Electronics are in. Went with the stock Losi receiver, a random Losi servo I had and a Hobbywing 1060 esc. Try to stay under $100 on this rig since I'll probably never drive it. Sent from my iPhone using Tapatalk |
Re: My Losi Mini Scaler https://uploads.tapatalk-cdn.com/201...d4e82809e1.jpghttps://uploads.tapatalk-cdn.com/201...fa18c209a3.jpg Got the suspension setup pretty good. Maybe I will drive it after all. Sent from my iPhone using Tapatalk |
Re: My Losi Mini Scaler https://uploads.tapatalk-cdn.com/201...a6ec38f1a4.jpghttps://uploads.tapatalk-cdn.com/201...59d95ba863.jpg Mocked up the body. Ordered some Junfac hex spacers need to widen the stance a bit. Sent from my iPhone using Tapatalk |
Re: My Losi Mini Scaler Looking good. I have a set of those frame rails too and been trying to decide what to build lol. |
Re: My Losi Mini Scaler Quote:
Who sold them ? Bought them so long ago I can't remember ? Sent from my iPhone using Tapatalk |
Re: My Losi Mini Scaler Quote:
Looks like yours might be the aluminum version. Those were sold a long time ago lol. Mine is a delrin version. |
Re: My Losi Mini Scaler Quote:
Yeah mine are aluminum for sure. Sent from my iPhone using Tapatalk |
Re: My Losi Mini Scaler https://uploads.tapatalk-cdn.com/201...8913edecc7.jpg Decided to put on a light bar Sent from my iPhone using Tapatalk |
My Losi Mini Scaler https://uploads.tapatalk-cdn.com/201...19397b18ed.jpghttps://uploads.tapatalk-cdn.com/201...c4970dff68.jpghttps://uploads.tapatalk-cdn.com/201...d61f213028.jpghttps://uploads.tapatalk-cdn.com/201...aac12d9c8c.jpg Broke out the welder and made my first set of bumpers front and rear. Came out ok. Took some practice welding such small material and it warps so easy. Did the overdrive mod and took it for a test drive. Crawls pretty good for what it is but has terrible torque twist. Swapped in the heaviest mini springs I have. It helped but it's still to much to my liking. A symptom of having the shocks inside the frame rails I think. Going to order some heavier springs. Maybe build some sliders but the weight is getting up there for the motor and drive train size and I still haven't shop gooed the body which will add even more. |
Re: My Losi Mini Scaler https://uploads.tapatalk-cdn.com/201...b76ed815c3.jpg Also swapped out the tires for some RC4wd swamper looking 1.9s. Stock Losi MRC tires just didn't look right on it. Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 07:34 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com