Eletronics I bought a kit now waiting on parts. I got a savox 1230 monster torque servo going to run at 6.0 with a external bec and the alum servo horn from losi. at 6.0 volt says 500 oz at .16 speed Motor is a hobbywing ezrun max 10 SCT 120 amp motor is a 3200kv 550 size 3660SL sensorless With a CC bec 10 amp basic one. Ordered the 3rd member and thats about it Radio is a futaba 3pv This is what i ordered to put in asking here if its all ok or what i need to change. Going to run 2cell lipos to start then worry about going 3cell later Comments are more than welcome"thumbsup" |
Re: Eletronics During your build, replace all the diff screws with 2.5mm screws. You will have to drill the holes a little bigger in the hardened diff ring gear. The stock 2.0mm stock screws are a weak point your power system will break. Traxxas 2523 counter sunk 2.5mm screws. Your electronic choices should be fine. |
Re: Eletronics Thanks raul shabinguez for the info "thumbsup"I have not started to biuld the kit yet will ihave to retap the diff housing also? |
Re: Eletronics Quote:
I did not retap the housing and mine has been fine. |
Re: Eletronics Got all the stuff but the screws to start this kit. that ESC is huge WOW. As soon as the screws get here i will start. thanks for the help. |
All times are GMT -6. The time now is 11:24 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com