RCCrawler Forums - Emax es09md

Page 3 of 3

Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Micro Scale Rigs (http://www.rccrawler.com/forum/micro-scale-rigs/)

- - Emax es09md (http://www.rccrawler.com/forum/micro-scale-rigs/612483-emax-es09md.html)

ProjektONE

01-09-2020 10:42 AM

Re: Emax es09md

I have yet to purchase the ES09MD, but in my research many of the sites such as banggoods lists the servo as a 25T. If this is correct any aluminum servo horn from Losi or Savox thats 25T should work.

jimbo74

01-09-2020 03:03 PM

Re: Emax es09md

Quote:

Originally Posted by ProjektONE (Post 5989248)

It is smaller. It may very well have 25 teeth, but they are not the standard size. I have tested the standard size, and their diameter is much larger

ProjektONE

01-10-2020 08:03 AM

Re: Emax es09md

Quote:

Originally Posted by jimbo74 (Post 5989313)

It is smaller. It may very well have 25 teeth, but they are not the standard size. I have tested the standard size, and their diameter is much larger

Thank you for the clarification. Guess Ill be going with a Savox then.

bryan.hamm0nd1981

01-10-2020 11:04 AM

Emax es09md

I ordered one today and it comes with many horns. I ordered it off eBay and they come with horns for different applications
I considered the savox but man even the micro are expensive as my 1/16 servo. So I figured just go wit the Emax for now.

Sent from my iPhone using Tapatalk

jimbo74

01-17-2020 08:48 AM

Re: Emax es09md

So, this happens now.....

https://youtu.be/ZkciZVl4-WU

BIGW0RM

01-17-2020 10:09 AM

Re: Emax es09md

Quote:

Originally Posted by jimbo74 (Post 5991375)

So, this happens now.....

https://youtu.be/ZkciZVl4-WU

Thats funky. Bummer. My two analog 08 versions are still running strong even with TWO of them plugged into one channel via a y adapter. I have my led lights and a long can 050 motor in mine with a 450mah battery and I my lights DO NOT dim at all.

lotsip77

01-17-2020 10:18 AM

Re: Emax es09md

Quote:

Originally Posted by jimbo74 (Post 5991375)

So, this happens now.....

https://youtu.be/ZkciZVl4-WU

Turn the dual rate down

Sent from my LM-X210APM using Tapatalk

jimbo74

01-17-2020 02:36 PM

Re: Emax es09md

Quote:

Originally Posted by lotsip77 (Post 5991404)

Turn the dual rate down

Sent from my LM-X210APM using Tapatalk

I will lose a lot of steering if I do that

jimbo74

01-19-2020 01:03 AM

Re: Emax es09md

OK guys, you all were right... I tried it again with the dual rate turned down. I turned it down, until it didn't brown out anymore. It wasn't much adjustment @ all, and I still have quite a bit of steering :)

Newman_diver

01-20-2020 09:27 PM

Re: Emax es09md

Reefs makes a 25t servo horn for micro servos

https://www.reefsrc.com/store/p_903182/micro-25t-horn

jimbo74

01-20-2020 11:59 PM

Re: Emax es09md

Quote:

Originally Posted by Newman_diver (Post 5992280)

Reefs makes a 25t servo horn for micro servos

https://www.reefsrc.com/store/p_903182/micro-25t-horn

Sure this will fit? I tried tons of horns, and the emax es09md was just a lot smaller.

bryan.hamm0nd1981

01-21-2020 03:55 AM

Re: Emax es09md

Quote:

Originally Posted by jimbo74 (Post 5992315)

Sure this will fit? I tried tons of horns, and the emax es09md was just a lot smaller.

Mine came with the horns
I have one round that won’t do you any good. I have one long one you could make work.
I also have many other micro ones I’ll see if they fit the Emax and if so boom, I gotta market.
I’ll test them today if you or anyone needs horns, but I def have one extra that may work that came with it.

Sent from my iPhone using Tapatalk

jimbo74

01-21-2020 07:43 AM

Re: Emax es09md

I have a stock horn, and it's fine, but who doesn't want the bling?!

bryan.hamm0nd1981

01-21-2020 07:50 AM

Re: Emax es09md

Quote:

Originally Posted by jimbo74 (Post 5992363)

I have a stock horn, and it's fine, but who doesn't want the bling?!

Ohhh you all are talking alum / metal horns

Sent from my iPhone using Tapatalk

All times are GMT -6. The time now is 06:56 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page