RCCrawler Forums
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Micro Scale Rigs (http://www.rccrawler.com/forum/micro-scale-rigs/)
-   -   Emax es09md (http://www.rccrawler.com/forum/micro-scale-rigs/612483-emax-es09md.html)

jimbo74 10-15-2019 04:49 PM
Emax es09md
 
Anyone running this servo? Looks to be within 1mm of size to the es08, but stronger, and digital instead of analog.

QuesoDelDiablo 10-16-2019 09:36 AM
Re: Emax es09md
 
Looks like it might fit, case dimensions do appear almost identical to the 08ii.

You might have guinea pig it for us..

jimbo74 11-23-2019 11:27 PM
Re: Emax es09md
 
so....... no one?

jimbo74 11-25-2019 04:34 PM
Re: Emax es09md
 
Anyone know if the fact it is digital will matter? I know some radios won't play well with digital stuff. Or vice versa

BIGW0RM 12-01-2019 06:03 PM
Re: Emax es09md
 
Quote:
Originally Posted by jimbo74 (Post 5979353)
Anyone know if the fact it is digital will matter? I know some radios won't play well with digital stuff. Or vice versa
I know the stock electronics do not like the analog 08 ones. I tried plugging one into the 3rd channel for 4WS (saw it working online) and it would freak out.

Using a savox servo in that, it would toggle from left middle right just fine.



The EM08 analog ones also did not like the flysky GT5 4WS receiver. It would jump around when I would switch the 4WS mode (on, off, crab, etc).

They do work fine with a signal reverser though.

Strong little servos. But not electronics friendly IMO.

jimbo74 12-01-2019 07:18 PM
Re: Emax es09md
 
Quote:
Originally Posted by BIGW0RM (Post 5980623)
I know the stock electronics do not like the analog 08 ones. I tried plugging one into the 3rd channel for 4WS (saw it working online) and it would freak out.



Using a savox servo in that, it would toggle from left middle right just fine.







The EM08 analog ones also did not like the flysky GT5 4WS receiver. It would jump around when I would switch the 4WS mode (on, off, crab, etc).



They do work fine with a signal reverser though.



Strong little servos. But not electronics friendly IMO.
So you are saying go with the digital 09 or the analog 08?

BIGW0RM 12-01-2019 08:21 PM
Re: Emax es09md
 
Quote:
Originally Posted by jimbo74 (Post 5980654)
So you are saying go with the digital 09 or the analog 08?

Well, I would try the digital.

Dont get me wrong. The analog one works fine for normal single use. They just didnt like being used in the AUX port if you were going for 4WS.

They didnt like my GT5 receiver with 4WS setup either. Those are the only two limitations I ran into with mine.

I also tried a savox digital one and it worked fine in the AUX port and with the flysky GT5 in 4WS setup.

So if I was going to order one, I would probably try the digital. In fact, I kind of want too now!

noel2 12-02-2019 06:37 PM
Re: Emax es09md
 
I just ordered an ES09MD, I'll get back to you in two weeks to see if it fits lol. It has nearly the same measurements as ES08 so a bit of shaving should be enough. I'll have the Shapeways ES08 mount too.

jimbo74 12-02-2019 08:52 PM
Re: Emax es09md
 
Quote:
Originally Posted by noel2 (Post 5980921)
I just ordered an ES09MD, I'll get back to you in two weeks to see if it fits lol. It has nearly the same measurements as ES08 so a bit of shaving should be enough. I'll have the Shapeways ES08 mount too.
Nice. Lmk how it works. I want to do this, just hadn't gotten confirmation on anyone who had done it.

Shapeways is doing a sale right now

jimbo74 12-08-2019 08:30 PM
Re: Emax es09md
 
Did you get it yet? Haha, I know it has only been 6 days, but I'm impatient.

noel2 12-09-2019 04:31 PM
Re: Emax es09md
 
Quote:
Originally Posted by jimbo74 (Post 5982221)
Did you get it yet? Haha, I know it has only been 6 days, but I'm impatient.
The eBay seller still hasn’t shipped the servo. I sent them a message two days ago and they haven’t responded. Bad luck I guess. I’ll get a refund if they don’t respond again and order from a different seller. Sorry.

jimbo74 12-10-2019 12:08 AM
Re: Emax es09md
 
Was it coming from China?

noel2 12-10-2019 06:00 PM
Re: Emax es09md
 
Quote:
Originally Posted by jimbo74 (Post 5982528)
Was it coming from China?
DHL so my guess is yeah. The vendor replied and told me to ask for a refund if it doesn’t get here in the next couple of days.

BIGW0RM 12-10-2019 06:40 PM
Re: Emax es09md
 
Bummer guys. Once mine goes out, that will be the one I buy next.

Sh0rtBus 12-11-2019 06:42 AM
Re: Emax es09md
 
The only concern I have with the ES09D is that it doesn't have metal gears. Does it really need it? Maybe not. But for me at least, I'd rather not have that as a weak link in the build. Since it's a micro, I doubt there's much advantage in running a digital servo vs an analog. But of course I'll be the first to say I could be wrong.

noel2 12-11-2019 11:10 AM
Re: Emax es09md
 
Quote:
Originally Posted by Sh0rtBus (Post 5982838)
The only concern I have with the ES09D is that it doesn't have metal gears. Does it really need it? Maybe not. But for me at least, I'd rather not have that as a weak link in the build. Since it's a micro, I doubt there's much advantage in running a digital servo vs an analog. But of course I'll be the first to say I could be wrong.
The ES09MD has metal gears.

https://rover.ebay.com/rover/0/0/0?m...2F173414827140

BIGW0RM 12-11-2019 11:10 AM
Re: Emax es09md
 
Quote:
Originally Posted by Sh0rtBus (Post 5982838)
The only concern I have with the ES09D is that it doesn't have metal gears. Does it really need it? Maybe not. But for me at least, I'd rather not have that as a weak link in the build. Since it's a micro, I doubt there's much advantage in running a digital servo vs an analog. But of course I'll be the first to say I could be wrong.
Oh. I didnt know that. In my situation, I have 4WS and there is a lot of stress on mine with my big weighted wheels. I personally would want all metal gear.

Thank you for mentioning that. I almost bought 2 just to try digital over the analog I have.

BIGW0RM 12-11-2019 11:11 AM
Re: Emax es09md
 
Quote:
Originally Posted by noel2 (Post 5982898)

There we go! Boom! "thumbsup"

jimbo74 12-14-2019 01:07 AM
Re: Emax es09md
 
well, I ordered one....

jimbo74 12-14-2019 11:20 PM
Re: Emax es09md
 
Says my servo has shipped usps and should be here friday

noel2 12-17-2019 05:53 PM
Re: Emax es09md
 
Quote:
Originally Posted by jimbo74 (Post 5983583)
Says my servo has shipped usps and should be here friday
Just installed mine today. It fits on the stock mount but you’ll need longer screws and some spacers to fill in the gap.

The shapeways ES08 mount works too and has less of a gap between the mount itself and the servo holes but it isn’t necessary.

old man 52 12-18-2019 09:56 AM
Re: Emax es09md
 
Would any of you guys know where to get a servo horn , these have a very course spline , can't seem to find and information to order some , I'd appreciate any info , Thanks

Bbknucks 12-18-2019 01:56 PM
Re: Emax es09md
 
Did you break or lose the ones it came with?

At this scale the stock white ones work good. So far at least

old man 52 12-18-2019 04:55 PM
Re: Emax es09md
 
Quote:
Originally Posted by Bbknucks (Post 5984472)
Did you break or lose the ones it came with?

At this scale the stock white ones work good. So far at least
There wasn't any that came with it , when i contacted the fbay seller , he gave me a email address for some Chinese place , so since i haven't heard from them , im looking elsewhere

Bbknucks 12-18-2019 07:41 PM
Re: Emax es09md
 
Oh well that sucks...


https://www.gearbest.com/rc-model-ac...pp_146061.html

Here are some

old man 52 12-18-2019 08:25 PM
Re: Emax es09md
 
Quote:
Originally Posted by Bbknucks (Post 5984574)
Oh well that sucks...


https://www.gearbest.com/rc-model-ac...pp_146061.html

Here are some
Says discontinued

jimbo74 12-18-2019 09:42 PM
Re: Emax es09md
 
Got my servo. Does indeed come with a bag of hornshttps://uploads.tapatalk-cdn.com/201...7c2fef9531.jpghttps://uploads.tapatalk-cdn.com/201...8f61dd3fd4.jpg

old man 52 12-18-2019 11:12 PM
Re: Emax es09md
 
Ya i figured so , but i not buy another

Bbknucks 12-19-2019 04:33 AM
Re: Emax es09md
 
Damn didnt notice that...

old man 52 12-19-2019 05:22 AM
Re: Emax es09md
 
Quote:
Originally Posted by Bbknucks (Post 5984614)
Damn didnt notice that...
No problem , i appreciate the effort

bdt00buckshot 12-20-2019 10:59 AM
Re: Emax es09md
 
Looking at these on Amazon, some come with horns some look like they do not.

jimbo74 12-20-2019 11:04 AM
Re: Emax es09md
 
If you buy it from a reputable seller, then it comes with a bag of horns, in a box.

I just got mine from amazon.

Mine was from Magnits

old man 52 12-20-2019 11:57 AM
Re: Emax es09md
 
Quote:
Originally Posted by jimbo74 (Post 5984925)
If you buy it from a reputable seller, then it comes with a bag of horns, in a box.

I just got mine from amazon.

Mine was from Magnits
Ebay 99% standing , thought that was good enough

jimbo74 12-20-2019 05:22 PM
Re: Emax es09md
 
Quote:
Originally Posted by old man 52 (Post 5984940)
Ebay 99% standing , thought that was good enough
I have lately just been not happy with ebay.

Of course I am a delivery associate for amazon so....... but amazon is just so much easier, and prime delivery isn't like ebays well it might be here in 5 days - 30 days, lol

old man 52 12-20-2019 09:33 PM
Re: Emax es09md
 
Guess I'll try to epoxy one on , had done it before with good results

Wisco 12-20-2019 10:02 PM
Re: Emax es09md
 
Surprisingly my LHS carries these servos. I picked up the ES09MD and it fit by using longer screws. I may order the larger servo mount for the EMax servos off of shapeways. Its one powerfull servo for this truck. The only issue I have is after maybe 2 minutes of running the servo acts likes the horn isn't centered right. Once I turn the truck off/on again it will center properly. It has done this since I bought the truck though so I'm thinking it may be the radio. Any suggestions on this?

jimbo74 12-21-2019 08:42 AM
Re: Emax es09md
 
Quote:
Originally Posted by Wisco (Post 5985032)
Surprisingly my LHS carries these servos. I picked up the ES09MD and it fit by using longer screws. I may order the larger servo mount for the EMax servos off of shapeways. Its one powerfull servo for this truck. The only issue I have is after maybe 2 minutes of running the servo acts likes the horn isn't centered right. Once I turn the truck off/on again it will center properly. It has done this since I bought the truck though so I'm thinking it may be the radio. Any suggestions on this?
Great..... and this is why I hate modifying things.... ends up worse than stock....

Bbknucks 12-21-2019 03:44 PM
Re: Emax es09md
 
Quote:
Originally Posted by Wisco (Post 5985032)
Surprisingly my LHS carries these servos. I picked up the ES09MD and it fit by using longer screws. I may order the larger servo mount for the EMax servos off of shapeways. Its one powerfull servo for this truck. The only issue I have is after maybe 2 minutes of running the servo acts likes the horn isn't centered right. Once I turn the truck off/on again it will center properly. It has done this since I bought the truck though so I'm thinking it may be the radio. Any suggestions on this?
If it's done it with 2 different servos then its gotta be the radio gear. Not sure what protocol the tx/rx are in these but you could bind another radio to the stock rx and see if it still does it or not

jimbo74 12-28-2019 12:05 AM
Re: Emax es09md
 
So..... does anyone have aftermarket horns that work for this? I haven't gone through my bin yet but did stop by my lhs right before they closed. All I found were too large

jimbo74 12-29-2019 10:59 PM
Re: Emax es09md
 
tried some at the lhs today.... nothing fit


All times are GMT -6. The time now is 03:20 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com