Steering servo upgrade and shock mod SCX24 I just purchased an Axial SCX24 and I really need to upgrade the steering servo and the bumpy shocks. Servo: I have seen that many people upgrade the servo to an Emax ES08MA, will this fit into the stock mount or do I need to mod or buy any aftermarket parts to make this fit? Shocks: What can be done with the stock shocks in order to make them less bumpy? Thanks! |
Re: Steering servo upgrade and shock mod SCX24 Quote:
Some people put grease in the shocks to soften the bumpiness. |
Re: Steering servo upgrade and shock mod SCX24 I have my Emax servo installed with longer bolts, no spacers. In fact, I have two installed this way on my SCX24. But I can see how a small little spacer would look better. But its not needed IMO. I found that putting a couple black rubber o rings around the shock sleeve to add some preload to the springs worked well. I think the stock springs are way too soft. |
Re: Steering servo upgrade and shock mod SCX24 Quote:
I went to the HD and bought small o-rings in the plumbing section. I added those to the top of the shocks and it helped dramatically. I added 2 per shock at the top. I also am putting in a larger servo but opted for the tray from shapeways for a more cleaner fit. I couldn’t get longer screws in without them going in crooked so I just ordered the $10.00 part. Longer screws and a bushing will give instant gratification though. I burned my servo up in about 3 weeks so I’m just waiting on a few parts to upgrade it and I’m done. For now... Sent from my iPhone using Tapatalk |
Re: Steering servo upgrade and shock mod SCX24 Thanks for the replies. I will order an Emax servo today. What is the size of the longer screws? Also, for the shocks I have two additional questions: 1- When you say that you fill the shocks with grease, do you fill the entire shock just like you do with regular shock oil or do you just put some grease on the shafts? 2- So the O-rings are just placed on top of the springs to increase the pre-load? Thanks again and sorry for all the questions :) |
Re: Steering servo upgrade and shock mod SCX24 Quote:
For the bushings it helps the shocks not bottom out with the truck weight. I didn’t grease my shocks but that would prob keep things smooth. I have new shocks coming in anyway. I’ll save the spares for the kids trucks. But the new shocks are coming from asiatees website so it takes like a month to get into the US. I ordered this servo tray for the larger Emax es08/09 servos , should be in tomorrow morning. I don’t like shoddy work with long screws and bushings to home a bigger servo. And it’s fairly cheap. To each is own tho... This shapeways site has lots of very important upgrades like lower battery tray and lower esc tray. Just search scx24 and you’ll find all sorts of goodies. Here is the link to the tray though. https://www.shapeways.com/product/8J...li=marketplace |
Re: Steering servo upgrade and shock mod SCX24 Quote:
I also got the suv body mount because I hate the hinge on back. Pain in but to work on it with the body flopping around so now I’ll have body post in the rear rather than a hinge. Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 10:03 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com