Re: Ar60 6x6 wood hauler
 

Got the lights wired up and interior painted. Also had some time to work on the "payload".

http://uploads.tapatalk-cdn.com/2016...0f0fb4052c.jpg

I like keeping wiring nice and clean so I've got one main power connector for all the lighting with spots to add later if I add more.
http://uploads.tapatalk-cdn.com/2016...e322d7681b.jpg

Had a bunch of extra foam so I added a "cooler" for the hollow log pile. I think I'll be the most popular guy on the trail!
http://uploads.tapatalk-cdn.com/2016...8c0a9a702d.jpg

http://uploads.tapatalk-cdn.com/2016...bb15c2d94e.jpg

http://uploads.tapatalk-cdn.com/2016...9040999a46.jpg

Now I'm gonna leave a beer in there for a while and drink it to check if it's still cold...you know, for science purposes.

Re: Ar60 6x6 wood hauler
 

Well my electronics showed up today from Amazon, just like almost all my other rigs I went with a castle sidewinder 3 and a CCBec. Motor wise I went through the old parts bin and found an old Axial 55T that should do the trick. I don't imagine ill be doing any rock bouncing with this thing and on 3s the 55T should be good enough.

Recently I got my hands on a Vanquish Hurst DIG that I think will really help with this trucks (I assume) horrible turning radius. The price was right and why not.

Now that I've got the truck all wired up and ready to go I gave it a quick drive around the shop. To my disappointment it's completely undriveable, the front end is binding at the axles and at full droop the front driveshaft is binding a little bit. Back to the drawing board, going to be in the market for a ar60 panhard adapter for sure.

Note to self: Complete the chassis before starting on the extensive body work!

Re: Ar60 6x6 wood hauler
 

Great idea on the cold ones and I'm sure you'll be able to figure out the front end...Any pics on what has to be corrected..
we might have some suggestions on how to fix it..."thumbsup"

Re: Ar60 6x6 wood hauler
 

I really like the power bus bar you have/made. What is it? I'm going to do this on the next truck and have an idea but would like to know what you used please. Good luck on the geometry up front.
Ben

Re: Ar60 6x6 wood hauler
 

Thanks for the offer but I've got a pretty good idea of what needs to happen, I just tend to throw things together and see how they work instead of planning it out. Flying by the seat of my pants!

First step is I'm gonna move the skid plate backwards to help with the driveshaft angle and get a set of cvd's for the front. One big advantage to this proscaler frame is the amount of mounting points it has offers a lot of flexibility.

In the back of my head I knew that I needed a panhard kit for the front but I was in denial. I think it's gonna have to wait till after Christmas though, they're more expensive than I thought!

Re: Ar60 6x6 wood hauler
 

I know I got it from HobbyKing a while back, I think it was in the servo accessories section. One of those things you buy to fill your cart without going over the weight threshold for cheap shipping. [emoji12] If I can find it again I'll post up the link for you.

Sent from my Nexus 5X using Tapatalk

Re: Ar60 6x6 wood hauler
 

just post in the wanted section some body might have it for cheap price or check the for sale section might luck out and find your pan-hard..

Re: Ar60 6x6 wood hauler
 

Found it, pretty expensive! Lol

https://hobbyking.com/en_us/servo-splitter-lead-1-female-to-5-male.html

Re: Ar60 6x6 wood hauler
 

Thank you very much!!!

Re: Ar60 6x6 wood hauler
 

Considering how hand made the rest of this build is I decided to try and build my own panhard mount. In my mind I think it will be strong enough but only time will tell. http://uploads.tapatalk-cdn.com/2016...f25fc7920a.jpg

I admit I cut a little too much off the chassis mount but who knows it may last. Half the fun is seeing what you can get away with! Although I'm not sure I want to carry this one out if it breaks...
http://uploads.tapatalk-cdn.com/2016...3aa723cd16.jpg

After the front end was adjusted I was able to finally drive it around the shop. For having a 19in wheelbase it actually drives pretty well! I've had these axles sitting around for so long that I forgot there's an overdrive gear set in the front so combine that with the dig and she might have a half decent turning circle (all things considered).

Tomorrow's project is permanently mounting the electronics and gearing down the pinion.

Re: Ar60 6x6 wood hauler
 

While out Christmas shopping today I picked up some of the final parts I need to finish up this project. I got a set of gmade wheels and another pair of pitbulls growlers. They aren't the same wheels as the rear but I kind of wanted them to be a bit different. Love the scale hardware they are using now, I only wish they were a bit wider.
http://uploads.tapatalk-cdn.com/2016...bf6c40e549.jpg

I also came across a driver... Unfortunately Clay's legs don't move so they had to be amputated but for $10 I can't complain. Also picked him up a furry friend so has a companion to walk home with when his Ford breaks down [emoji23]
http://uploads.tapatalk-cdn.com/2016...dd471fc7f5.jpg

Re: Ar60 6x6 wood hauler
 

Got most of the bumper done tonight. Would like to add a couple fog lights to fill in the gap.
http://uploads.tapatalk-cdn.com/2016...6bb76ebc8f.jpg

Re: Ar60 6x6 wood hauler
 

Been a while since I've updated this build. I'm currently waiting on some parts for the rear cantilever suspension. As it stands I've got the levers pivoting on a bolt with plastic washers to allow movement. During the building stage this has been great but really won't last, as they wear it will just create play in the arms and that's not ideal. A few weeks ago I ordered a bunch of 3mm thrust washers off eBay to take care of this issue. Once these show up I'll be able to properly tune the rear and hopefully get it on the trail!

Re: Ar60 6x6 wood hauler
 

Forgot to mention I added another brace and some fog lights to the bumper to fill it in. The exchange rate is killing me! Paid $33 for an axial light bucket kit. Last one I bought was around $23.

http://uploads.tapatalk-cdn.com/2017...50d580d321.jpg

Re: Ar60 6x6 wood hauler
 

Still waiting on the slow boat from China for that hardware so I've been working on some finishing touches.

I spent some time on the rear bumper. Drilled some holes and added some mesh for the brake lights. I eventually plan to use an old servo to run some reverse lights as well. The aluminum also polished up nicely!
https://uploads.tapatalk-cdn.com/201...97609c3cbd.jpg

https://uploads.tapatalk-cdn.com/201...acb23f7c2d.jpg

Re: Ar60 6x6 wood hauler
 

My m3 thrust bearings showed up! I originally ordered these months ago and the first shipment never showed up. Now that I've got them installed I'm very happy with how smooth the cantilever suspension is working. Now I can play with the springs and make some bump stops to help with the tires rubbing on the bed.https://uploads.tapatalk-cdn.com/201...dde84b026c.jpghttps://uploads.tapatalk-cdn.com/201...a24d1d7087.jpg

Re: Ar60 6x6 wood hauler
 

Looking good, might I suggest taking a black sharpie and outlining around the headlights to give them more separation from the body

Re: Ar60 6x6 wood hauler
 

Good call! I know I've got a parma detail pen kicking around here somewhere....

Sent from my Nexus 5X using Tapatalk