Question about RC4WD Beast 2

[raddad1975]

I've been wanting a 6x6 for a little bit now and have been eyeing the Beast 2 rtr. I have a scx 10 deadbolt and was just wandering how big the beast is compared to the deadbolt. Thanks in advance

[Huber1918]

I do not have a Deadbolt to compare it to. However, The overall length from bumper to bumper is a little over 24 inches. Width is about 5.25. From the rear most axle to the center of the front it is roughly 16 inches.

I hope that helps! I just finished painting mine, it was a awesome build!

[raddad1975]

[QUOTE=Huber1918;5651105]I do not have a Deadbolt to compare it to. However, The overall length from bumper to bumper is a little over 24 inches. Width is about 5.25. From the rear most axle to the center of the front it is roughly 16 inches.

I hope that helps! I just finished painting mine, it was a awesome build![/QUO

I know the beast is 1/14th scale but hot does it compare in size to a 1/10 scale truck.

[Rjohn929]

It's smaller? What exactly are you asking? The dimensions are listed.

[raddad1975]

Originally Posted by Rjohn929

It's smaller? What exactly are you asking? The dimensions are listed.

I want to know if its as big as a 1/10 scale truck like the deadbolt or honcho. I want a 1/10 6x6. I know the beast is big but wasnt sure just how big it was. I know it is 1/14 scale and all but from what I have read it is huge. Cant seem to find any pics for comparision

[Rjohn929]

The dimensions are listed. Just compare them to anything you want to compare it to. It's larger then a deadbolt. It's a 6x6. If you made your deadbolt a 6x6 it would be larger then the beast.

[Huber1918]

Originally Posted by raddad1975

I want to know if its as big as a 1/10 scale truck like the deadbolt or honcho. I want a 1/10 6x6. I know the beast is big but wasnt sure just how big it was. I know it is 1/14 scale and all but from what I have read it is huge. Cant seem to find any pics for comparision

I would recommend measuring a Deadbolt or whatever you want and compare the measurements to the ones I listed.

Pictures really don't give fair comparisons, I could take a picture of my Tamiya semi and make it look like a full size Semi.

[DrewHammer]

Pretty sure the Beast II uses yota based axles. So, not considering the width difference from the wheel offsets, the width should be similar to a Deadbolt.

[BoyFreakWonder]

Just imagine an extra axle on whatever 1/10 you got and tada! You have a rough estimate. I have a 6x6 addiction. 😷

[raddad1975]

Originally Posted by BoyFreakWonder

Just imagine an extra axle on whatever 1/10 you got and tada! You have a rough estimate. I have a 6x6 addiction. 😷

thats what I was wanting to know. looks like I'm getting a beast 2 with my taxes. Cant wait

[raddad1975]

Originally Posted by raddad1975

thats what I was wanting to know. looks like I'm getting a beast 2 with my taxes. Cant wait

now the question is what upgrades does it need right away and what can wait. I am gonna make it a hauler