too high I think my crawler sits too high what should i do to make it lower? smaller shocks these are 4" losi shocks. http://i469.photobucket.com/albums/r...y/jeep3004.jpg any comments would be awesome thanks keith. http://i469.photobucket.com/albums/r...y/jeep3002.jpg |
Limit your shocks, put either fuel line or a spacer on the shock piston inside the shock and it will lower your ride. |
move the rear shocks in closer, that will lower the rear, won't affect torque twist. It will still need spacers or fuel line in the shocks though. |
run a droop set up, |
Angle those rear shocks forward quite a bit more and stiffen up the springs to compensate for the angle. |
:mrgreen:run it droop |
How do I run a droop system just take the springs off and put the fuel line on it? |
rebuild the shocks with tubing/spacer inside the shock housing. |
All times are GMT -6. The time now is 12:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com