| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
01-13-2010, 10:20 PM
| #1 |
| Newbie Join Date: Aug 2009 Location: Hold on, I think I have an app for that..
Posts: 47
|  Parts availbility for MOA
I was looking into a MOA setup and was wondering about the parts availbility for berg and bully axles. Are all parts sold for either of those axles (shafts, bearings, gears, pins, steering, mounts, ect.), or are there parts that cannot be replaced. The reason I ask is because a small bearing in my R2D went out and is unrepalceable. I was looking at MOA instead of getting new trans, but didn't want to spend that much $ and run into having to throw them away when a shaft, gear or bearing goes bad. |
|  |
| Sponsored Links | |
| | |
|
01-14-2010, 06:54 AM
| #2 |
| Pebble Pounder Join Date: Dec 2009 Location: scotts valley
Posts: 165
|
Yes replacement parts are available. Check out RC4wd for bully parts. I would suggest MOA.
|
|
| |
|
01-25-2010, 09:42 PM
| #3 |
| Quarry Creeper Join Date: Mar 2008 Location: Columbus OH
Posts: 234
|
If you go with the berg you will find many vendors.Thus, easier to find what you need and shop for best price. With the bully there is only rc4wd. You have already seen that it can be hard to find a part with them. You can get berg stuff everywhere down to the screws. |
|
| |
|
01-26-2010, 08:19 AM
| #4 |
| I wanna be Dave Join Date: Feb 2009 Location: 20 miles southeeast of downtown Sacramento
Posts: 2,373
|
Bully parts come from rc4wd. Berg parts are available from tcs, a-main and ckrc to name a few. All are pretty easy to come by. All HR parts are not available but most berg parts fit. And most all bearings are available from Avid: http://www.avidrc.com/shop/ Last edited by oldhippie; 01-26-2010 at 08:21 AM. |
|
| |
|
01-26-2010, 09:45 AM
| #5 | |
| I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| Quote:
To the OP, that bearing is not part of their replacement gears for the R2? http://www.rc4wdstore.com/2/product_...roducts_id=342 http://www.rc4wdstore.com/2/product_...roducts_id=406 Last edited by JeremyH; 01-26-2010 at 09:48 AM. | |
|
| |
|
01-28-2010, 03:53 PM
| #6 |
| Newbie Join Date: Aug 2009 Location: Hold on, I think I have an app for that..
Posts: 47
|
Those small bearings for the center gear shatfts are not sold in any kits and RC4WD said they don't sell them. I looked into the axles and sites you guys suggested and helped alot. Parts are all available to rebuild berg and bully but you got to search for them in stock. Both look good, but I think I like the weight of the bergs and mounts(links\servo). |
|
| |
|
| |
Linear Mode
