m11 help

[joe_k]

i have a m11 had it for years great radio just got into scale trucks and i cant get the wench to work when i turn it to 4 ch i lose steering and well everything

[ScaleFreak93]

Wench? Do you mean winch? If you mean winch do you have everything setup properly? Pics would help.

[K_B]

I assume you're using one with a spektrum module? Have you tried to re-bind? I think if you switch it to 4-channel mode, you have to re-bind. I vaguely remember something like that when I had my M11

[klimb2xs]

First off what kind of winch are you using? Servo or 3Racing/RC4WD style?

Are you using a BEC? If you are not using a BEC you are most likely causing the RX BEC to cutout.

I have a M11 that I am using on a SCX-10 with a3Racing winch and a Castle BEC powering both the winch and steering servo.

Here is how I have my M11 setup to run a winch on CH3.

BR MIX


ASIGN - TRIM

I also have the dial setup to control the winch, but I prefer to use the trim switch.

C-MIX1


C-MIX2

[65BAJA]

Is this set up for a servo winch? I use an M11 for my crawler and I have my name in the pot for a QS. Since the QS may be a while yet I want to try a servo winch first.

EDIT: NVM. I set the screens to what is shown and it seems to work fine off of the dial. Thanks.