Throttle trim problem So i'm having a problem with my throttle trim/ESC I believe. I have everything set up correctly I believe but when I turn on the ESC the car wants to move on it's own. I have the trim turned all the way down but it still wants to barely crawl. Any help is appreciated! Below is my setup. Car: SCX10 ESC: Novak Goat 3s Motor: Novak Ballistic 21.5t Brushless Radio: Tactic TTX240 2 channel 2.4ghz Receiver: Tactic TACL0324 3 Channel Servo: Hitec 5645 Digital Servo BEC: Castle 10amp BEC (Directly connected to Servo) Battery: Zippy Lipo 3s 3000mah 40c |
Re: Throttle trim problem try re-calibrating your esc to your radio that should fix it also set your throttle trim back to neutral/center before you do that |
Re: Throttle trim problem This worked perfectly. Thank! |
Re: Throttle trim problem If the problem comes back, check your dead band settings. I just had to increase mine because the throttle did not have enough "room" on the dead band, and it wanted to creep one way or the other. |
All times are GMT -6. The time now is 10:15 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com