12-20-2019, 12:48 PM | #1 |
Newbie Join Date: Dec 2019 Location: NW
Posts: 4
| 92-96 Bronco body
Hi all, new guy here. I've got a TRX4 Bronco, and now I have it in my head to replicate my real '96 Bronco. Has anyone seen a 1/10th scale 92-96 Bronco body available? I've been looking but I dont really know what to search for.
|
Sponsored Links | |
12-20-2019, 02:23 PM | #2 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,013
| Re: 92-96 Bronco body
I'd say all you really need is a different grill for the existing Traxxas Bronco body, right? Try Shapeways, or finding someone with a 3D printer to knock one out for you. |
12-20-2019, 02:33 PM | #3 |
I wanna be Dave Join Date: May 2006 Location: Arlington, VA
Posts: 3,377
| Re: 92-96 Bronco body
Above is probably going to be your best bet aside from making a body. Only other late model Bronco I've seen was an early 80's model, and that's long discontinued. Might have been made by Parma, and I just found this as well but looks to be disco'd. https://www.amainhobbies.com/proline...472-00/p507622 |
12-20-2019, 03:47 PM | #4 |
Newbie Join Date: Dec 2019 Location: NW
Posts: 4
| Re: 92-96 Bronco body
Thanks for the replies. I've seen the Proline body, and can still find one locally. Unfortunately, the 79 Bronco body is not the same shape as the 5th gen broncos, so the grill idea wouldnt really work. |
12-20-2019, 04:09 PM | #5 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,013
| Re: 92-96 Bronco body
Sorry, not enough of a big-Bronco aficionado to realize all the detail differences - my crawlin' buddy has the TRX-4 version and it looks fine as is. The RC world does not tend to get that specific with model year differences, although there are quite a few Toyota Hilux variations available. |
12-20-2019, 04:17 PM | #6 |
Newbie Join Date: Dec 2019 Location: NW
Posts: 4
| Re: 92-96 Bronco body
No worries Durok I'm just kinda hoping someone's seen one other than the hardbody that some seller on facebook had at one point in time a few years ago.
|
12-20-2019, 04:33 PM | #7 |
I wanna be Dave Join Date: May 2006 Location: Arlington, VA
Posts: 3,377
| Re: 92-96 Bronco body
92-96 isn't too far from the 81 ProLine, alot closer than the 79! The 81 is a little more square than the later Broncos but with a printed or DIY grill would make a decent match. |
12-20-2019, 05:03 PM | #8 |
Rock Crawler Join Date: Oct 2009 Location: Upstate NY
Posts: 959
| Re: 92-96 Bronco body
I have one but it's smaller than a TRX4 Bronco. It's all resin and quite thick. Width at the wheel wells in the front is 8.25(210mm) and the rear is 8.3(212mm), and wheel base is about 11.3(287mm). Pics are on 1.9's but I think the RC4WD 1.55 Ultra rims would be perfect. |
12-21-2019, 12:28 AM | #9 |
I wanna be Dave Join Date: Oct 2010 Location: Caldwell ID.
Posts: 4,328
| Re: 92-96 Bronco body
J concepts has a couple lexan 92-96 F150 bodies. With some creative mods you could turn them into a Bronco.... possibly. Next closest, Proline has a 80-86 Bronco, in a wide body Slash and a crawler model( guess its discontinued now). My slash on the left next to my Nephews... |
92-96 Bronco body - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does any defender body or wrangler body can fit on a vaterra ascender bronco | willsirois | Newbie General | 4 | 05-04-2017 12:51 PM |
| |