04-23-2009, 07:06 PM | #1 |
Quarry Creeper Join Date: Jul 2008 Location: looking for that perfect setup
Posts: 455
| 3s lipo in stock slash
what would happen if i put a 3s lipo in a stock slash |
Sponsored Links | |
04-23-2009, 07:09 PM | #2 |
MODERHATER™ Join Date: Nov 2005 Location: Colorado
Posts: 10,939
|
It will go faster, I did it with mine for awhile before I upgraded my motor and ESC. There is no voltage cut off so beware!
|
04-23-2009, 07:25 PM | #3 |
Quarry Creeper Join Date: Jul 2008 Location: looking for that perfect setup
Posts: 455
|
is there an easy way i can put a cut-off on there till i can get a new motor?
|
04-23-2009, 07:47 PM | #4 |
RCC Addict Join Date: May 2006 Location: Roseville
Posts: 1,469
|
Motor isn't the problem (although it will burn out pretty quickly) it is the ESC. The ESC doesn't have a cutoff built in, so there is no way for you to know really when the battery volts drop into the unsafe voltage. You don't want to risk permanently damaging the battery or worse yet causing it to vent and potentially catch fire. I have seen it happen once in an E-Maxx, had it happen to me in an airplane (but it was caused by a crash). The Novak cut-off I hear is a bit more reliable than most, so it might be a good one to invest in. If you plan to go brushless though, many of the popular ones have LVC built in. Might be the better option if you are going 3s, the motor and ESC can take it.
|
04-23-2009, 07:49 PM | #5 |
Relaxed ! Join Date: Apr 2009 Location: On the road again !
Posts: 1,324
|
new esc with cutoff,what size lipo? also if u have a buddy that has an esc w/lipo c/o then time your battery and drop 1-3 min off, till u get a new esc __________________________________________________ _____________ pro stock slash, outlaw slash bender warthog 1/8 buggy if ur gonna be a bear , be a grizzly |
04-23-2009, 07:54 PM | #6 |
Quarry Creeper Join Date: Jul 2008 Location: looking for that perfect setup
Posts: 455
|
there is this for $25 .............BUT.....is it easy to put together? http://www3.towerhobbies.com/cgi-bin...?&I=LXRHU6&P=7 Last edited by zach; 04-23-2009 at 08:00 PM. |
04-23-2009, 08:05 PM | #7 | |
Rock Crawler Join Date: Apr 2005 Location: Monroe, Louisiana
Posts: 550
|
Check the Max Amps site. I read something about the Novak one and the blue case XL-5 not working together on there. They also have low voltage alarms that plug into you balance taps. Quote: | |
04-23-2009, 08:40 PM | #8 |
RCC Addict Join Date: May 2006 Location: Roseville
Posts: 1,469
| x2, I have heard that the blues don't work the best, if at all, with most of the LVC's.
|
| |