NC check in thread.
 

Since the forums are dead and Facebook is filled with drama.. let's see how many people are active on RCC. Post up where you live in NC and what rigs you drive or are working on. Let's get this page going again.

I'll start..

Greensboro NC

1: GMRC "ZFG" axial 10.2 chassis comp rig
2: axial scx10 yota Truggy
3: axial EXO Terra buggy
4: new XXL yota project. (Build thread coming soon)

Re: NC check in thread.
 

Greensboro NC

1. Axial SCX10 Honcho
2. Axial SCX10 II Hilux
3. RC4WD Trail Finder 2 Mojave II
4. RGT Rock Cruiser

Re: NC check in thread.
 

Asheville nc

1 scx10 based raptor
2 scale Polaris rzr
3 timberwolf on wraith axles


Sent from my iPhone using Tapatalk

Re: NC check in thread.
 

Raleigh

Oh, where to begin...

-TRX4
-Ascender
-SCX10 II
-Kinda a SCX10 but with no original SCX10 parts left
-TF2
-Gelande 2
-GCM Skeleton JK
-GCM Cmax
-Bomber
-IFS Bomber
-1.9 Wraith
-Yeti Jr
-3 other SCX10s for the family
-Some other non-crawler stuff

Re: NC check in thread.
 

Chinquapin. Near Jacksonville

Scx10 hilux
Gcm skeleton jk
Undecided in many pieces scx10 (pile of parts)

Re: NC check in thread.
 

Beautiful down town State Road NC in the heart of Wilkes-by-God county. ( trust me folks, it's there )

SCX-10 Cheap Cherokee
SCX-10 baised tuber

Re: NC check in thread.
 

Durham, NC 27705

https://i.imgur.com/HFh1OJC.jpg?1

https://i.imgur.com/uTWij3e.jpg?1

https://i.imgur.com/9ithlWb.jpg?1

https://i.imgur.com/yL2AYo3.jpg?1

Re: NC check in thread.
 

Charlotte, NC

Axial SCX10 II
HPI Wheely King X2
Custom 1/5 Scaler

Re: NC check in thread.
 

Princeton

- SCX10 Honcho (third incarnation)
- SCX10 Deadbolt
- SCX10 Power Wagon
- '56 Chevy stepside on MST CMX
- Jeep JK hard body on MST CFX (just finished)
- Vaterra Ascender K5 (wife's)
- Gmade Komodo (son's)
- Slash 2WD
- Next is likely a Cross 6x6 but the TRX-4 kit Bronco would distract me as well

Re: NC check in thread.
 

Well this wasn't a bad turn out but I know there are still a lot of people in NC that crawl...

Re: NC check in thread.
 

Charlotte, NC

Bomber

I am still looking for some good places to go in Charlotte!?

Re: NC check in thread.
 

goldsboro,n.c. 2 sawbacks with leafs,new redcat gen7 sport

Re: NC check in thread.
 

Come out-come out- wherever you are. "thumbsup"

Re: NC check in thread.
 

Eventually I'm going to get to one of the scale crawling events they hold at Uwharrie.

Re: NC check in thread.
 

Gastonia home of the hold my beer specials.

Cutting the projects down have a:

C2 Zuki build
C1 TF2 (new to the leafing game) and if any of the fine law enforcement of Gastonia happens upon this I do mean leaf springs not the green kind.:lmao:

Re: NC check in thread.
 

I'm in asheville got a little bit of everything besides a class 1.
Class 2 sami
Class 3 brat
2.2 sporty evo
2.2 pro remedy

https://uploads.tapatalk-cdn.com/201...26919abfc2.jpghttps://uploads.tapatalk-cdn.com/201...d5427b68f5.jpghttps://uploads.tapatalk-cdn.com/201...80d935dd55.jpghttps://uploads.tapatalk-cdn.com/201...4c4f9fae19.jpghttps://uploads.tapatalk-cdn.com/201...ead588cfee.jpghttps://uploads.tapatalk-cdn.com/201...d3437479af.jpghttps://uploads.tapatalk-cdn.com/201...cade26f666.jpg

Sent from my SM-G930V using Tapatalk

Re: NC check in thread.
 

Better late.... Checking in from Zebulon. I might have a good spot, will check it out soon. I think they keep security there though. I always see someone there, even at 4:00AM heading to work.

Re: NC check in thread.
 

Sweet, glad I found this thread,

Greenville, but i'm hoping to get back to Charlotte in the next year

I currently am without anything RC, but I'm gathering parts for a swb SCX10 build with a Uni body...

I used to race back in the 90's, had an RS4 Pro that I used to be pretty decent with..

Re: NC check in thread.
 

Charlotte...

https://uploads.tapatalk-cdn.com/201...2e737b7faf.jpg

Re: NC check in thread.
 

Fayetteville

Re: NC check in thread.
 

Raleigh.

RR10 Bomber
Losi SCT10

I used to be into R/C in the 80's when i got a Tamiya Hornet for Christmas. Just recently got back into it. Also just recently moved to NC.

Re: NC check in thread.
 

Southport

Axial Scx10 Deadbolt with Jeep body
Ascender K10

Re: NC check in thread.
 

Hwy 42/ I40 Cleveland area

SCX10 Deadbolt (just bought it)
other rigs
Savage
Tmaxx
Revo
MT2
SC8
Firestorm
Nitro Sport
Nitro Stampede

Re: NC check in thread.
 

Laurinburg (yes, I know "where is that?" Think south of Fayetteville, where US 74 and US 401 cross) area, but the group of guys I crawl with are mostly based around Sanford, with a few in Fayetteville and Statesville.

SCX10.2

Re: NC check in thread.
 

Hampstead

SCX10 ii 2017 Jeep JK CRC RTR
SCX10 ii 2000 Jeep Cherokee Kit
Yeti Jr RR

Re: NC check in thread.
 

Welcome to the forum! Sweet, you get to play on Topsail "thumbsup"

Re: NC check in thread.
 

Glad to see there is still a few people trickling in on this thread...


Sent from my iPhone using Tapatalk

Re: NC check in thread.
 

Raeford, NC Been trying to complete the track in my backyard.






Yeti
Wraith x3
SCX10 x2
SCX10.2
GMade R1
AX10
Redcat
1/8th 2.2 Crawler

Re: NC check in thread.
 

Been 10 hours...done yet? :ror:

Let us know so we can come break the track in for you "thumbsup"

Re: NC check in thread.
 

I haven't touched an RC in a couple years now. But got the urge recently and dug my rigs out of the garage and got them all in good shape and ready to go. But for the life of me, I can't find anywhere local to go play. Anyone still around in western NC?

Re: NC check in thread.
 

How far west are you? Stone Mountain is just north of Wilkesboro, Rocky Face just south...both fun places to trail & crawl.

We've done a few trails off the Parkway too (not the heavily visited ones).

Re: NC check in thread.
 

I'm just over an hour west of Asheville, in the sticks. Wilkesboro is over three hours away, one way. I've stopped playing on any USFS property after some guys were threatened by USFS for having motorized vehicles on foot trails, I shit you negative. This is the BS we deal with from the USFS in NC, it's full retard. I read it about it on here, or one of the RC forums.

Re: NC check in thread.
 

Wow, you are out there!

Yeah, I posted a rant thread about being kicked out of a local park for the "motorized vehicle" BS recently. Just adds to my contempt for all things NC.

Conversely, rangers at mid-state parks wanted to stop and talk about the trucks with no negative input at all. They all thought they were cool.

Never played that far west...I'm sure there are lots of places in Maggie Valley...maybe...

Re: NC check in thread.
 

I'm from Asheville I just picked up a scx10 today so I'm pretty new to crawling. it'd be cool to find a group of people near by.

Sent from my SM-G930V using Tapatalk

Re: NC check in thread.
 

lexington nc have a tf2 ecx barrage slash 4x4 kyosho mp7.5 e buggy

Re: NC check in thread.
 

I'm still here in beautiful down town State Road NC representing the crawling scene-or what's left of it. Not much GTG style crawling going on like back in the day, it's went the way of organized club style events. I miss the days where a few guys would throw their rigs on the rocks and not worry if their stuff was "class legal" or if it fit into what the masses were running. I still it the rocks locally on a regular basis-although mostly by myself, but I'm still running. Just remember-keep posting up with your when and where, if no one knows about it then no one will show.


Keep the scene ALIVE!!

Re: NC check in thread.
 

Still here and my new house is about 15 minutes from Haw River so I try to get out a couple weekends a month whether anyone else is there or not.

I'll post up next time I'll be out there and anyone that can make it is welcome to join. "thumbsup"

Re: NC check in thread.
 

New guy checking in from the Triangle area!
Anyone have some insight into which hobby shops offer solid crawler support? I dropped by the Durham Ho-B Max last week but was pretty disappointed to find a half-empty, dishevelled storefront, with a hodge-podge of Redcat crawlers stacked on top of each other, and only one poor employee doing his best to help people but he was clearly a little overwhelmed. Otherwise it looked mostly like a basher/race support shop. Since I didn't have any intention of buying anything I didn't bother trying to get his attention to ask any questions. Otherwise, closest RC hobby stores I have found are Hangar 18 in Cary and the Ho-B Max @ Triangle Town Center. My new fascination with RC crawlers actually sparked when I walked by that store and saw the TRX-4 Bronco sitting in the window, and that store did look much cleaner / better staffed than Northgate, but I haven't had a chance to go properly investigate. Any others east of Raleigh I've missed??

Re: NC check in thread.
 

I'm afraid you're going to stay disappointed, in my experience, in most of the eastern NC area. "Solid crawler support" seems to have sailed, or so nearly all the local shops have told me, Hangar 18 not the least. World of RC Parts in Wilson and Hobby Nook in Smithfield have basic stuff, Hobby Nook actually carries a lot of Axial and Traxxas parts. There was a Hobbytown USA in Apex until recently but the guy was an ID 10 T and it closed. Raleigh Hobby and R/C in Garner is good for paint and building materials, but it's mostly a lawnmower shop (no kidding).

Online is the standard. You won't find a LHS either willing or able to talk crawlers with you IMHO and personal experience. Maybe someone else has found someplace I haven't...

Re: NC check in thread.
 

Well that is about what I expected, but it is a bummer to hear anyways. Thanks for chiming in!
Would have loved to support a local store, but don't see much point in buying a new truck from a place that isn't going to carry any of the parts or have anyone with any knowledge to share...