hard bodies alright guys, i'm getting closer to starting my scaler and i want to use a hard bodie. what are some good ones besides clod bodies, and does any one have one they will sell or know were i can get one thanks |
Go to WALMART they sell toys with different hard bodies, another good place would be Radioshack. |
How scale are you going for? I have a CJ-7 Hardbody with folding windshield, Jerry can, spare tire, steering wheel and more. http://memimage.cardomain.net/member...71_45_full.jpg It's the one in the middle if you couldn't figure it out. The CJ-5 isn't for sale so don't even think about:) http://memimage.cardomain.net/member...71_43_full.jpg |
Nylint and Nikko make quite a few bodies as well. Off the top of my head there are 97-03 F-150 standard cab and extended cab bodies, 94-01 Rams, 80's Yotas, several Escalade EXT/SUT, CXTs, Robbe makes Unimogs, there are Avalanches, Wranglers TJ and YJ, Tacomas, Pajeros, the Blackfoot bodies and the Ranger from Tamiya, Monster Beetles, Blazing Blazers, the lunchbox and midnight punkin', the Juggernaut, Hummer from Tamiya, and there are many others I can't recall at the moment. If you decide what scale you are going for, the list can be narrowed somewhat. Check towerhobbies and ebay for bodies, just remember hard bodies are usually a good bit more expensive and more difficult to paint well. |
If you want a truck based shell, bruder are good. Theres pretty tough, you can pick them up on ebay, or if your having problems getting them on the american/uk on go to ebay.de (have bablefish.com ready to translate if your not too good with reading german) and your sure to see one you'll like! |
Quote:
|
sory for the lack of info. as for scale i guess 1/10 or 1/8 since i'm gonna use tlt axles. any body know of a pre 1994 dodge ram hard bodie? i'd really love one of those since thats what kind of car i want. if i cant find one of thoses i'll probly use a clod, jaggernut, or midnightpumpkin bodie unless some one has a Blazing Blazer or Ranger bodie they wont to sell me for cheap:-P |
The CJ-7 would look great with a little tube work and a set of Moabs on a 12.5in WheelBase. One would have to Comp cut the rear and move the Jerry Can. The body is 11.5in Long. Counting the Bumber it's 12-1/4in Long. It is 5-1/2in Wide. With a little cutting it would make a sweet Scale Weekend warrior. |
All times are GMT -6. The time now is 01:28 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com