Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

Hello, my name is Lucas and I'm from Poland so sorry if my english isn't perfect.
I'd like to show You today my rally car.
It took me one season of rallying to finish this setup and it's almost* done (*because there is always a place for improvement)

It's based on a Tamiya TT-02D Type S kit link, and it's powered by SkyRC ESC and 17,5T brushless motor

Below You can see the full list of hop-ups used for this project.

Custom parts and modification:
- full custom front and rear shock towers, battery holder, bumper holder, rear suspension shafts holder
- trimmed c-hubs, front knuckles, lower suspension arms
- full bushings to ball bearings replacement
- cordura / nylon inner cover inspired by Dusy Motors

I hope You enjoy my work and I'd like to invite You to visit the Facebook profile of our league.

Hop-ups list:
- Tamiya Double Cardan Joint Shaft - 44mm https://www.tamiyausa.com/items/radi...nt-shaft-42216
- XV01 Assembly Univ Shaft https://www.tamiyausa.com/items/radi...iv-shaft-54515
- TT02 Alum Racing Steering https://www.tamiyausa.com/product/it...oduct-id=54574
- GF-01 Aluminum Oil Damper https://www.tamiyausa.com/items/radi...l-damper-54670
- TT02 Type-S Aluminum Upper Arm Mount Tamiya TT02 Type-S Aluminum Upper Arm Mount 2Pcs Blue #54651,
- Yeah Racing Ball Bearing Steering Set for Tamiya TT02 TT02B #TT02-042BU, ,(TT02-042BU) by Yeah Racing Aluminum Ball Bearing Steering Set
- Yeah Racing Aluminum Adjustable Motor Mount for Tamiya TT02 TT02B #TT02-013BU, ,(TT02-013BU) by Yeah Racing Aluminum Adjustable Motor Mount
- Yeah Racing Alloy Wheel Washer Set Thick 6mm for 1/10 RC Touring Drift Crawler Car #WA-016BU, ,(WA-016BU) by Yeah Racing Alloy Wheel Washer Set Thick 6mm (BU)
- Aluminum Bearing C-Hub
- Tamiya High Speed Gear Set https://www.tamiyausa.com/items/radi...gear-set-54500

http://i.imgur.com/fmUtjn2.jpg
http://i.imgur.com/vC0Yn4S.jpg
http://i.imgur.com/yvRraOE.jpg
http://i.imgur.com/hxtW5c5.jpg
http://i.imgur.com/c4PqKrf.jpg
http://i.imgur.com/KjaX6Jd.jpg
http://i.imgur.com/hOurAYu.jpg

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

Today some photos of tarmac setup - lower towers, shorter TRF shocks, harder springs, HPI Pirelli tyres...

I've recently upgraded to shorty lipo packs. It helped saving ~100g, but it also forced me to change electronics layout by placing ESC at the opposite side of the chassis for better balance.

http://i.imgur.com/IIsnd7f.jpg

http://i.imgur.com/D6rPNHT.jpg

http://i.imgur.com/u5UOra0.jpg

http://i.imgur.com/npjmbSI.jpg

http://i.imgur.com/G6ODke4.jpg

http://i.imgur.com/5uEYCUp.jpg

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

Very nice. You've given me some ideas for my TT-02s. What battery are you using?


Sent from my iPhone using Tapatalk

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

Right now I'm using these:

https://hobbyking.com/en_us/graphene...connector.html

The price is insane, but I bought them with 50% discount during short period cyber november offer.

Earlier I've used

https://hobbyking.com/en_us/turnigy-...lipo-pack.html

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

Nice. Thanks. I need one of those short batteries. [emoji106]


Sent from my iPhone using Tapatalk

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

How do the fabric chassis covers work for you? Obviously they protect but do they cause any overheating of the motor? Beautiful car!! We need more Rally in the USA.

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

It works pretty well. I run 17.5T motor on 2S battery and with small fan on my Toro ESC and never had problems with overheating, but our SS are no longer than 8 minutes, so it wasn't tested in longer bashing runs.

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

Which arm parts you are using? they aren't the stock TT02.

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

They aren't stock for most of TT-02's, but there are some limited kits called "Type S" that come with TA-05/TRF-416 based suspension, including lower arms, c-hubs, uprights and others.

check out these:
https://www.tamiyausa.com/items/radi...ssis-kit-58600

https://www.tamiyausa.com/items/radi...ssis-kit-47301

If You want to convert Your TT-02 in the Type S version You'll need to combine some parts from:
https://www.tamiyausa.com/product/it...oduct-id=54634

and

Tamiya, Short Reversible Suspension Set ,(54083)

but I don't know if You'll find everything needed in those two parts kits.

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

how much ground clearance did you manage to get out of your tt02?

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

25mm on HPI Pirelli tyres. It may be possible to get more, but I didn't need that.

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

Nicely done. Looks good and I'm sure it's fun!

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

can you share a closer pic of the front upper links? i started with a tt02, but starting using other tamiya parts. Not familar with that inner link tie/brace.

Sent from my SM-N910V using Tapatalk

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

forgot to add, NICE car!!! i really wish rally would get big in the US. i really like the japan leg of RC cars. Not that they are better or worse, its just a personal pref, as the japanese do things unlike others. take there phillips screws, they are so much better to use over an amercian phillips screw/screw driver. If you have never used a TRUE japan phillips screw driver , please try. they fit so much better than US. (even in amercian screws)

Sent from my SM-N910V using Tapatalk

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

this is how i secured my front upper links. On this car, i can only adjust the length, but your pictures look like you can also move the link forward and backward? (camber AND caster-pitch?)https://uploads.tapatalk-cdn.com/201...f6b0cbc159.jpg

Sent from my SM-N910V using Tapatalk

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

the buggy seems to have a little more tune room. https://uploads.tapatalk-cdn.com/201...b62500a3b9.jpg

Sent from my SM-N910V using Tapatalk

Re: Kukaszek's Tamiya TT-02 TSR (Type S Rally)
 

They are made for TT-02 Type S version:
https://www.rcjaz.com.au/tamiya-5465...-90070624.html