UGLY's Bully 2 Whats up guys, here's the current build. Axles: Bully 2 Motors: 35T GoolRC Esc's: Dual Hobbywing WP1080 Servo: Savox 1230SG / HB Alum. horn Shocks: Traxxas Big bores w/cap mod / mini T springs Front Tires: HB Sedona / Incision Methods / CI DD 5.5 comp cut w/soft outer Rear Tires: JC Ruptures / Bully Comp / CI DD 5.5 comp cut "shaved" w/soft outer Lipo: Rear mount graphene 800mah Misc: RPM rod ends / Savix stainless pivot balls |
Re: New Bully 2 Dig is ok..... but you really want dual esc and the ability to use front or back and the proportional control that a 4 channel TX allows. Hang up and Drive |
Re: New Bully 2 First of welcome to the Bully 2 club "thumbsup" You picked a great starting platform. You can check out my build thread or acouple of the other good drivers here like Samu,Jslick or Cboggs just to mention acouple on what we run but here is what i would go with - ESC - Holmes Hobbies dual BR Mini's Motor - Holmes Hobbies 30 or 35 turn motors / Brood Servo - Either a Hitech 7950 or the Holmes Hobbies 500 servo Castle BEC Radio - Futaba 4PV or 4PLS both are super simple to set up. i run a Nano 450mah battery If you have any question please feel free to ask away "thumbsup""thumbsup" Just my 2 cents |
Re: New Bully 2 Quote:
I understand, it initially came down to cost, and the wife had to spend some money as well."thumbsup" |
Re: New Bully 2 Quote:
How much run time are you getting with the 450s? |
Re: New Bully 2 Quote:
I get anywhere from 10 to 15min depending on how i'm driving. |
Re: New Bully 2 Have a rockster dig unit I'd sell also have a few other parts if looking |
Re: New Bully 2 Quote:
Thats a decent runtime for 450s. Do you notice any difference in performance or is it a personal preference? |
Re: New Bully 2 I run 850's and get 30 to 40.. https://uploads.tapatalk-cdn.com/201...766825d2aa.jpg Hang up and Drive |
Re: New Bully 2 Quote:
If Moms happy, Everyone is happy ..... Enjoy !! Hang up and Drive |
Re: New Bully 2 Quote:
|
Re: New Bully 2 Quote:
Are you going to complete with it? |
Re: New Bully 2 Quote:
What are my options for electronic dig switches? |
Re: New Bully 2 For now, just use the rc4wd dig switch. Then later on if you love the rig, want to comp and have the money, pick up a holmes dual esc. |
Re: New Bully 2 Oroville Ca? If so, I'm in Paradise, crawl the Fish Hatchery often, and run a Bully2. There aren't many comp guys around here, mostly scalers but I don't do facebook so I'm kind of out of the loop. I have a build thread on page two in the Bully section, feel free to hit me up for some crawling once this fawking rain is done! |
Re: New Bully 2 Quote:
That's what I did, when the rear channel burned out. It worked quite well for 20 packs, and I learned how good dig is. Hang up and Drive |
Re: New Bully 2 Quote:
Yes sir, I have crawled the hatchery a number of times with my old LNC. Bald rock is also pristine. I've wanted to crawl on the dam but I dont know how park rangers would feel about it. Might give it a shot with the bully. Shoot me a pm when you crawl the hatchery, my build should be complete next week. |
Re: New Bully 2 Good thing you haven't crawled the dam, you probably would have been blamed for the giant hole in the spillway.:ror: |
Re: New Bully 2 Quote:
It looks like DWR is going to open the spillway and deal with the aftermath this summer. |
Re: New Bully 2 I have a new in package Novak Dig switch ill sell you if interested. |
All times are GMT -6. The time now is 02:51 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com