|
| LinkBack | Thread Tools | Display Modes |
07-09-2007, 07:42 PM | #1 |
I wanna be Dave Join Date: Apr 2004 Location: SoCal
Posts: 5,027
| Wheely King 2 position C's, Knuckles, and BTA bracket, Clod Knuckles and Much More
With many new items sitting in the production line at the factory, we are starting to see a bunch of them completed and now in stock or headed our way. Below are a few of the items just completed and some that are in stock now. Below are the Wheely King two position C's and Aluminum Max Steer Knuckles. We have finished prototype testing and have put both parts into production. We should see them in stock in a few weeks. The final product will have a polished aluminum finish. We have designed the knuckles for max steer and with plenty of turning room for the new Wheely King MIP CVD's. Below is a set of aluminum knuckles by Integy. These are now in stock and will be added to the site shortly. They come in silver, red and blue anodized. They come with a complete set of bearings, king pins and king pin bushings. Retail for the pair will be $29.99. Our new Bruiser anodized black skid plates arrived the other day. We have plenty in stock and they will go up on the site shortly. We received a shipment Wheely King BTA brackets. We are making some minor modifications and they will be up on the site shortly. The brackets have holes to mount both upper and lower suspension links via TLT suspension stay brackets. Other Items that just arrived. Montana Scale Designs BB-51 scale chassis Integy Clod metal gear kit New items coming in this week. R & D Engineering Stainless Steel 10 and 15 degree TLT axle C's Stock clod axle kits......$119.99 for two complete stock Clod axle kits Stock TLT axle kits......$79.99 for two complete stock TLT axle kits. Traxxas complete Tranny kit Bender SW3 Chassis Clod Steering kits (Choice of clear anodized or black anodized) Integy tool case New Scale accessory Integy Clod Axle servo bracket, complete with hardware, 4 braces and 2 servo brackets. Retail... $20.99 2.2 Hustler Kits New Items coming in next week. Wheely King CVD's Integy Crawler Tires 2.2 Hustler Kits Last edited by Rockpiledriver; 07-09-2007 at 08:52 PM. |
Sponsored Links | |
07-09-2007, 08:24 PM | #2 |
Picky Fab'r/Acetal Junky Join Date: Jul 2006 Location: Arizona Desert/AJ
Posts: 3,073
|
Cool I have been holding off on my WK build just because I knew there were so many new items about to hit the market. Only a matter of time now. |
07-09-2007, 08:31 PM | #3 |
Quarry Creeper Join Date: Feb 2007 Location: Fresno
Posts: 472
|
Um, dumb question while I wait for clocked stainless C's, Do the axle kits come with bushings or bearings?
|
07-09-2007, 08:50 PM | #4 | |
I wanna be Dave Join Date: Apr 2004 Location: SoCal
Posts: 5,027
| Quote:
First stage is all stock components and come with plasic bushings. $79.99 for two axle kits. Kit includes suspension stay brackets for mounting upper and lower links. Second stage is all stock components and come with bearings. $ 89.99 Kit includes suspension stay brackets for mounting upper and lower links. Third Stage is all stock components, bearings and MIP CVD's. Fourth Stage is all stock components, bearings, MIP CVD's and RCP Max Steer Knuckles. Fifth Stage is all stock components, bearings, MIP CVD's, RCP Max Steer Knuckles and RCP ring and pinion lockers. No pricing on the third and fourth and fifth stage axle kits as of yet, but buying these kits will give you a big savings as opposed to buying the upgrades separately. To get an idea of the savings, you can visit our website and see the pricing on the Clod Stage kits. There are some new axle kits in developement for both the TLT and Clod kits that will lower the total cost of two axles kits. These new kits won't be available for another few months. | |
07-09-2007, 09:11 PM | #5 |
Quarry Creeper Join Date: Feb 2007 Location: Fresno
Posts: 472
|
very nice. Thanks for the fast reply. I had seen the clod kits, just didn't manage to put it all together.
|
07-10-2007, 06:40 AM | #6 |
I wanna be Dave Join Date: May 2006 Location: HONDURAS...ROCK HEAVEN
Posts: 5,076
| I will be ordering a couple tlt axle kits asap |
07-11-2007, 04:01 AM | #7 |
Pebble Pounder Join Date: Jun 2007 Location: Juneau, AK
Posts: 153
|
Where are those Wheely King Items listed on your webite?
|
07-11-2007, 04:57 AM | #8 |
I wanna be Dave Join Date: Apr 2004 Location: SoCal
Posts: 5,027
| I posted above that they will be listed on the site "shortly" The C's and Knuckles are in production. The CVD's are in production. The BTA bracket is here, but needs minor modifications before being available on the site. Thanks, John |
07-11-2007, 10:58 AM | #9 |
Pebble Pounder Join Date: Jun 2007 Location: Juneau, AK
Posts: 153
|
No problem, Thanks keep us posted
|
07-11-2007, 12:25 PM | #10 |
I wanna be Dave Join Date: Apr 2004 Location: SoCal
Posts: 5,027
| |
07-11-2007, 12:56 PM | #11 |
Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast
Posts: 8,864
|
O hellz yea on the chino mount Ill be scooping a couple of those up for sure -Mike |
07-11-2007, 01:16 PM | #12 |
Quarry Creeper Join Date: Apr 2007 Location: Katy, TX
Posts: 482
|
any ETA on that wk servo mnt>?
|
07-11-2007, 01:48 PM | #13 |
I wanna be Dave Join Date: Apr 2004 Location: SoCal
Posts: 5,027
| We have 200 sitting in the shop. The mounting holes need to be opened up and there is slight modification that needs to be done to the center diff 1/4 circle cut out. We should have all the mods done by the weekend. Thanks, John Last edited by Rockpiledriver; 07-11-2007 at 01:55 PM. |
07-11-2007, 01:52 PM | #14 |
Quarry Creeper Join Date: Apr 2007 Location: Katy, TX
Posts: 482
|
Thats awesome, I'll take 2 of 'em! Does your website send out email updates? If so, sign me up!
|
07-11-2007, 01:54 PM | #15 |
I wanna be Dave Join Date: Apr 2004 Location: SoCal
Posts: 5,027
| |
07-11-2007, 04:21 PM | #16 |
Pebble Pounder Join Date: Aug 2004 Location: Redondo Beach
Posts: 123
|
When will the chino skids be listed on the website?
|
07-11-2007, 04:38 PM | #17 |
I wanna be Dave Join Date: Apr 2004 Location: SoCal
Posts: 5,027
| |
07-11-2007, 04:40 PM | #18 |
I wanna be Dave Join Date: Apr 2004 Location: SoCal
Posts: 5,027
| |
07-11-2007, 04:46 PM | #19 |
Im Brandon Join Date: Feb 2005 Location: Colfax, CA
Posts: 8,156
| |
07-11-2007, 10:37 PM | #20 |
Pebble Pounder Join Date: Aug 2004 Location: Redondo Beach
Posts: 123
|
Just got four of them. Thanks for the great products!
|
| |