|
Re: scale tricks thread 2 Attachment(s) |
Re: scale tricks thread 1 Attachment(s) Attachment 202643 3-D flip flops in stickers at wally world. |
Re: scale tricks thread nice ideas, thanks mates |
http://images.orkut.com/orkut/photos...1MguP_mDWU.jpg http://images.orkut.com/orkut/photos...73rroPGohL.jpg http://images.orkut.com/orkut/photos...Gaa4gnjenZ.jpg http://images.orkut.com/orkut/photos...1wJu0j7QmU.jpg Honcho Cap's painted http://images.orkut.com/orkut/photos...AnF9zPZ3wo.jpg Falas galera, mais uma pra compartilhar com vocês.Espero que os seus saiam mais bonito pelo menos. :lol: Pra manopla vai precisar de mola, termoretrátil, cotonete e durepoxi...e pra ficar bonitim, tinta. Tá lá, http://images.orkut.com/orkut/photos...c7nN8R7i3w.jpg http://images.orkut.com/orkut/photos...glTKX-fI6g.jpg Da uma esticada na mola, eu fiz com alicate mesmo. http://images.orkut.com/orkut/photos...QmEgJ5RqbQ.jpg Corta o cotonete nas pontas e cola a mola em um dos lados, eu usei um parafuso na outra ponta por que eu quis. http://images.orkut.com/orkut/photos...soIWZniuGA.jpg Fiz uma bola de durepoxi e botei no parafuso. http://images.orkut.com/orkut/photos...w2jbPRfBhg.jpg Depois de pintado e passado o termo na mola. http://images.orkut.com/orkut/photos...LihB3r7ikw.jpg Um cambiozinho :) http://images.orkut.com/orkut/photos...SK-ID3GjXg.jpg ------------------------------------------------------------------------------------------- Pra quem ainda não viu meu Auto Meter lunar 8) RC Elétrico - o fórum de automodelismo elétrico! • Tópico: - [Tutorial] - AutoMeter Lunar escala, ou quase isso... Agora apresento-lhes o AutoGage miniatura. Vai precisar de um energético fullpower e um motorzinho escovado de carrinho de brinquedo. Corta a tampa da garrafa do energético e recorta no contorno do desenho, naipe do que eu fiz aqui. http://images.orkut.com/orkut/photos...68XEsXvmSg.jpg Arranca todo miolo do motorzim e deixa só a carcaça pra usar. http://images.orkut.com/orkut/photos...oMmxo8vGRg.jpg Encaixa um no outro e ta feito heheh.... http://images.orkut.com/orkut/photos...kpLNefDs5g.jpg O AutoMeter pai e o filho. http://images.orkut.com/orkut/photos...YWJThmfy7g.jpg Abraço. Fala galera, tava sobrando uns hashi de madeira então resolvi tentar fazer um hi-lift, não ficou lá essas coisa mas eu gostei. 1 Hashi http://images.orkut.com/orkut/photos...VnXuPg-2K3.jpg Aí usei uma microretifica para fazer os furos e cortar 2 stick's. http://images.orkut.com/orkut/photos...AnTM13KdN9.jpg Usei Durepoxi para fazer os acabamentos. http://images.orkut.com/orkut/photos...68sKDMKgDc.jpg Aqui já pintado, pena que a foto saiu tremida só percebi quando passei pro computador. http://images.orkut.com/orkut/photos...xtRhEd7Awg.jpg Aí usando no Honcho. http://images.orkut.com/orkut/photos...Oni-1_BMio.jpg Falou ! Eu fiz uma paradinha aqui mas não sei nem o que é... Tinha 2 tubinhos de plástico aqui pensei em pintar de azul e por o rótulo da NOS, mas não tinha a tinta azul. http://images.orkut.com/orkut/photos...ibpsXjkgaA.jpg http://images.orkut.com/orkut/photos...Xa9ANLL17g.jpg http://images.orkut.com/orkut/photos...4kExdbDC4w.jpg http://images.orkut.com/orkut/photos...mp_X06RLEA.jpg http://images.orkut.com/orkut/photos...eDH3Plo0qA.jpg http://images.orkut.com/orkut/photos...HwHRnyIoMg.jpg http://images.orkut.com/orkut/photos...lroCvg5wDQ.jpg http://images.orkut.com/orkut/photos...gagyT9CM_A.jpg Eu pintei um de prata e o outro de vermelho. http://images.orkut.com/orkut/photos...cVUkpt_MPw.jpg http://images.orkut.com/orkut/photos...gTVgudfPWw.jpg http://images.orkut.com/orkut/photos...XYwWv2C3ug.jpg Botei umas correntinhas em volta.E voilá, não faço ideia do que seja mas ta aí acho que vo por na caçamba do Honcho. Não liguem pra tinta toda torta eu não tinha pincel então usei cotonete para pintar http://images.orkut.com/orkut/photos...6tcUyR9Q7w.jpg Tirei aquele baratz de cotonete que tinha antes e liguei os fios tudo duma vez só botei um termo alí pra ficar menos feio. http://images.orkut.com/orkut/photos...85rugQB9nQ.jpg http://images.orkut.com/orkut/photos...a1dDBpvXBA.jpg Issae acho que vou deixar de enfeite também. http://images.orkut.com/orkut/photos...UI8UjkXWFQ.jpg Quote:
É Português do Brasil heheh...:) Melhorando um pouquinho o visual do AutoMeterzinho, cortei as rebarbas de alumínio."thumbsup" Before. http://images.orkut.com/orkut/photos...3B-lVZ6sDw.jpg After. http://images.orkut.com/orkut/photos...LZD8PZuedA.jpg |
Re: scale tricks thread That's a nice tac |
Re: scale tricks thread Made a snorkel for my honcho out of some rubber tube and a spare light bucket with some mesh pushed into it. http://i168.photobucket.com/albums/u...ng/snorkel.jpg |
Re: scale tricks thread Found this on Google Play for Droids Its a converter for modeling..converts to any scale. Search for "Scale Mate" thought it might be useful! JC |
Quote:
|
Re: scale tricks thread Quote:
Seems to work pretty well..was a free app so thought I'd try it..does alot of diff scales. JC |
Re: scale tricks thread I am learning not to throw anything away..got an action figure off ebay for 99cents and used the 2 legs packs for the trailer and the backpack I used to create a "medical pack" for the Unimog. http://i768.photobucket.com/albums/x...IMAG0040-1.jpg |
Re: scale tricks thread With a little imagination you can use just about anything to make scale stuff. There were a few used Co2 cartridges laying around, so after a little head scratching this is what happened. Cut the bottom off of one, and trimmed the neck a little bit on both, then got out the scrap styrene.... http://i478.photobucket.com/albums/r...k/DSCN4772.jpg http://i478.photobucket.com/albums/r...k/DSCN4771.jpg Had enough to build a little tool cart. http://i478.photobucket.com/albums/r...k/DSCN4774.jpg http://i478.photobucket.com/albums/r...k/DSCN4773.jpg The Oxy Acetylene rig is still a WIP, but it's getting close to being done. http://i478.photobucket.com/albums/r...k/DSCN4779.jpg http://i478.photobucket.com/albums/r...k/DSCN4782.jpg I'll post more pics later. |
Re: scale tricks thread You have regulators in your scrap styrene? Can I have some of your scrap? |
Winch Line Bind http://i1098.photobucket.com/albums/...CHLINEMEME.jpg I know I'm not the first one to have this problem, and I know I'm not the first one to come up with a solution. ALL credit for the idea goes to chino63 "thumbsup". Couldn't really find a thread like this, so thought I would post one up. This is the delema http://i1098.photobucket.com/albums/...87820D6183.jpg Your winch line pulls over the edge of the spool, between it and the gearbox, and gets so bound up that the only way to get it out is to disassemble the whole winch. This can be a huge pane! I even damaged my line trying to yank it out, so now it had to be cut shorter. MadDogRC sells a 3racing winch upgrade kit that is awesome. http://www.rccrawler.com/forum/scale...re-scale*.html I would have bought this if I didn't already have most of the parts. Couldn't justify the $24 for just the piece of plastic that chino63 makes. So I made my own. http://i1098.photobucket.com/albums/...879186AA2B.jpg I looked around for some packaging from anything that would come close to the thickness between the gearbox and the spool, to "fill the gap". My stock honcho lexan body came close, but I wasn't too quick to cut that up. I ended up using the bottom of a butter tub "I can't beleive its not butter." Cut it to shape, cut the hole for the gearbox shaft to go through, and put winch back together. "thumbsup" http://i1098.photobucket.com/albums/...879E54AE9F.jpg Not sure if "scale accessories" was the right place for this. A winch is kind of a scale accessory, but can also be a necessary tool, like say, a tire. Having a working winch is cool! Having a winch with the line stuck 2 feet out, not so much :lmao: |
Re: Winch Line Bind I've been meaning to do this to my winch. Thanks for the reminder "thumbsup"I'm going to add it to the to do list:shock: |
Re: Winch Line Bind Quote:
|
Re: Winch Line Bind It kept happening on my winch also. I made a shim out of a scrap piece of lexan I had laying around. Since then It has not bound up so bad that it could not be pulled free without disassembling the winch. This is definitely a great mod. I think the problem is also the roller fairlead is to wide allow the line to run off of the spool. |
Re: scale tricks thread 1 Attachment(s) Made a shovel, not my idea, stole it from a guy at the club(KCRC) Attachment 220777 16 penny nail split at each end with dremel. Made blade from brass sheet and the handle a brass rod with some shrink rap around it. |
Re: scale tricks thread 3 Attachment(s) Been making some scale shtuff outta bakeable clay lately. A CB radio, tool box, antifreeze jug, Tx, gas jug, hand gun, and my boston terrier. Working on a cordless drill too. Attachment 220779 Attachment 220780 Attachment 220781 |
Re: scale tricks thread My exhaust from 5/16 and 3/8 brakeline. they press fit together no brazing and the cheap brake line polishes up with mothers. http://i1276.photobucket.com/albums/...psc46b6eb3.jpg http://i1276.photobucket.com/albums/...ps8a0eb58d.jpg http://i1276.photobucket.com/albums/...ps53e55a52.jpg http://i1276.photobucket.com/albums/...psa1d3f44b.jpg |
Re: scale tricks thread |
| All times are GMT -6. The time now is 02:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com