Trailer build attempt Here is my attempt to build a trailer. Made from brazed stainless steel square pipe. http://i63.tinypic.com/2im3tqp.jpg http://i64.tinypic.com/6iu248.jpg http://i68.tinypic.com/2wlzgxg.jpg http://i68.tinypic.com/ogf0wg.jpg http://i63.tinypic.com/mvlu93.jpg It will build with : - Brake lights. - "Red and White" lines (I don't know what it's called). - Ramps. - 3Dprinted trailer axle, still needs to revise the axle. - Leaf springs on each side. - 3Dprinted trailer fender. Hopefully it turns out to be a scale trailer. |
Re: Trailer build attempt That is awesome! Which 3D printer are you using? |
Re: Trailer build attempt Very nice. May have to steal this style for my next trailer! |
Re: Trailer build attempt Quote:
Quote:
|
Re: Trailer build attempt Just printed the fender. This will painted in black. http://i64.tinypic.com/22coyr.jpg This box will use hinges and diamond plate on each face (on those recess). Also in black paint. http://i63.tinypic.com/15dqp89.jpg http://i66.tinypic.com/1199ow3.jpg Mock up.. http://i64.tinypic.com/2exsitx.jpg |
Re: Trailer build attempt Update for the box... http://i68.tinypic.com/30hmuio.jpg http://i68.tinypic.com/dvr51l.jpg Need to make the lock. |
Re: Trailer build attempt Great work! What size square tube and what are your plans for the hitch? The more I see things done with a 3d printed the more I want one |
Re: Trailer build attempt Quote:
|
Re: Trailer build attempt Where did you get the hinges from if you don't mind me asking there tinny. |
Re: Trailer build attempt Nice job! |
Re: Trailer build attempt Probably one the best rc trailers I've seen. Turned out great!! |
Re: Trailer build attempt Quote:
Quote:
Quote:
:) |
Re: Trailer build attempt Update.. Last axle that I printed didn't hold well. It was PLA, after a month (or 2 months, forget how long). The axle near wheel, where the bearings rest is broken. http://i65.tinypic.com/ixw40k.jpg Then I made new one with ABS. It looks like more stronger. http://i68.tinypic.com/nealo2.jpg Nothing changed on dimensions. But just now I printed 4 separate axle housings and CA'd them to make 2 halves separate axle housings assembly. And screw them for a complete axle. |
Re: Trailer build attempt Reupload... https://imagizer.imageshack.com/v2/6...924/ZjO1vA.jpg https://imagizer.imageshack.com/v2/6...924/NGyXSM.jpg https://imagizer.imageshack.com/v2/6...923/Q3R4MA.jpg https://imagizer.imageshack.com/v2/6...923/7vCDKI.jpg https://imagizer.imageshack.com/v2/6...923/zh8YPY.jpg https://imagizer.imageshack.com/v2/6...924/5uUTo3.jpg https://imagizer.imageshack.com/v2/6...922/BUu4bg.jpg https://imagizer.imageshack.com/v2/6...923/uNNMnP.jpg https://imagizer.imageshack.com/v2/6...923/LyF2Fp.jpg https://imagizer.imageshack.com/v2/6...922/iw7ViW.jpg https://imagizer.imageshack.com/v2/6...923/IIDvBy.jpg https://imagizer.imageshack.com/v2/6...924/PdpxJ4.jpg I'm continuing this build from today...hope getting progress pictures later"thumbsup" |
Re: Trailer build attempt Small update. Box screwed in place, https://imagizer.imageshack.com/v2/6...924/Ffsum3.jpg https://imagizer.imageshack.com/v2/6...923/Py8FTI.jpg |
Re: Trailer build attempt Man such an awsome looking trailer"thumbsup" I want one;-) |
Re: Trailer build attempt More updates, I made a coupler out of 3Dprint, it actually works. I add locking mechanism on it. https://imagizer.imageshack.com/v2/6...922/HbebGQ.jpg https://imagizer.imageshack.com/v2/6...922/m0EEag.jpg https://imagizer.imageshack.com/v2/6...922/CcmIte.jpg https://imagizer.imageshack.com/v2/6...924/CKchxs.jpg The 'hitch safety lock' didn't close enough to the ball. I need to modify my coupler design, if it can't I will remove 'hitch safety lock'. |
Re: Trailer build attempt Quote:
|
All times are GMT -6. The time now is 11:26 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com