Re: Twin Stick Tech
 

I am about to try to use the hobbyking 6 channel radio with pc programming. I will keep you posted. There is one video on youtube about this. It will be a couple of weeks before this controller arrives. If I can program successfully I will make a video.

Seb

Re: Twin Stick Tech
 

Cool that would be great thanks

Re: Twin Stick Tech
 

I played with a dx6i with 1 esc on a rockslide with a airplane rec.Throttle-throttle, rudder-front steer, ail.-rear steer. I'm also a airplane guy so this was natural for me. Worked pretty good, mid stick is no throttle up is foward down is reverse.

Re: Twin Stick Tech
 

I can help you with a dx6i. Dual esc and
4ws with correct throttle mixing is fairly easy.

What are you trying to do?

Hi Filo
I may need help assigning the switches(toggles) with the sticks. It may be easy once the Tx and software are in front of me. I have looked at the software gui. It's the Tx I am waiting for. If there is a simple tutorial out there about mixing I would be interested in seeing it. I would imagine that assigning toggles to sticks wpuld be similar among brands.

Re: Twin Stick Tech
 

I would like to run left stick rear throttle and steering right stick front throttle and steering with a mix to get dig on a toggle I'm running an m2 single ESC with 2 motors and 4ws

Re: Twin Stick Tech
 

I did a write up of my DX6I setup and posted it in the electronics forum.

http://www.rccrawler.com/forum/elect...ml#post4315335

Hope this helps someone"thumbsup"

Futaba 6ex
 

I havent noticed alot of chatter on 6ex but futaba will send internal cams and springs for free makes modding one super easy:thumbup:

Re: Twin Stick Tech
 

This is the mod I did to my stick radio to run the RWS.

Hope it will work well for me.

<iframe width="560" height="315" src="https://www.youtube.com/embed/W-A-ouha2Lw" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Re: Twin Stick Tech
 

I am super happy to see this thread, I just bought a X9D Plus 2019 and a SCX10 ii raw builders kit. So looking forward to running my RC crawler for the first time.