Pimpin' IS easy (build up) Hey guys, I have been lurking on the site for about 6 months now soaking up information. I finally got some extra money so I have started building me a crawler. I have been big into the 1:1 scene for a few years now and just need something to mess around with when not wheelin:) Heres some specs: 17" WB Pimp Cane8) Moab XL's with narrowed/star foams Velocity 6 wheels dyed black Clod axles RC4WD wheel adapters RC4WD all steel steerng frnt/rear HS-645MG front servo HS-5645MG rear Teken Rebel 2 TRX 2215 receiver Modded TQ3 55T lathes 9t pinion front 8t pinion rear I have everything except the wheels and motors (waiting on Ebay vendor), and the pimp cane chasis. Heres some pictures. Axles: http://austink5.net/albums/album328/100_2184.sized.jpg About what it will look like: http://austink5.net/albums/album328/100_2187.sized.jpg http://austink5.net/albums/album328/100_2188.sized.jpg TQ3 http://austink5.net/albums/album328/100_2190.sized.jpg Heres my 1:1 if anyone cares... http://austink5.net/albums/album313/100_0450.sized.jpg |
Cant wait to see the thing done shouldnt be to long before you have the chassis."thumbsup" |
Why are you running two different pinions? |
Quote:
Nice stance with that body "thumbsup" |
From what I read it eliminated the clod stall. Cant wait to get this thing going8) |
Quote:
Didn't you write an article in some magazine about that once? ;-) :lol: |
Should be cool. I've been Pimped aswell. How do you like those Irocks..I plan on buying some 39.5's soon. |
Iroks are sick. The 39.5 measures all of 40. Nice build |
Lookin good. As far as 1:1 tires, go for the 39" Krawlers, much better than the iroks....if you have the $$ that is. I've heard pro's and con's about the iroks. |
I love my 42's. They grip like crazy. Only thing is they wear super fast on the sharp granit. Crawlers are good if you can afford the reds. But I have been looking at the 40" Maxxis Creepys lately8) |
Welcome to the Pimp Club. "thumbsup" I've been hit with both the Cane and the Slap - Loving them both. Keep us updated! |
isnt gearing differently going to put a lot of force on the gears since there is a 5 revolution difference of the tires from 9 tooth to 8 tooth? |
It really isnt an issue I did it for over a year and never had any issues at all other than allmost no clod stall. |
8 tooth pinion in rear and 9 tooth in front works great i think . you will still get some stall . also will help you turn tighter as the rear will slide a little . i change to thay setup before the T.S.C. comp at FOTO and at the end of the day I was driving the winning RIG . "thumbsup" |
the best way to git rid of clod stall is to run a shafty!!!!!!!! NOW if i could only build a shafty that works!!!!!! |
Quote:
|
Quote:
|
Quote:
|
Anyways. Any new work done on the Pimp Cane? |
Quote:
I bought some crappy CA glue that didnt work worth a **** so I cant get my wheels and tires on. I drove it a little with some stock T-maxx tires/rims but am having a electronic problem (see electronics forum). |
All times are GMT -6. The time now is 11:11 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com