Track Width
 

Whats the easiest way to get my 2.2 clod down to 12.5 inches wide. Im runnin stampede front wheels.

narrow the wheels on both sides and don't use wideners.

Thanks clodman Thats what I was wondering, I just wanted to make sure if I needed to narrow both sides or not

Start with running Tamiya Dark Impact wheels. Either the wide or narrow, I'd shoot for the narrow version. They have the perfect offset for running a 2.2 tire on a Clod and trying to get it under the 12.5" width.

Wide Dark Impact wheels, MIP CVD's and alumininum knuckles.... Just under 12.5"....

http://www.rcrockgear.com/ORCRC_Comp...6/PICT8531.jpg

Narrow the Pede front wheels on the outside only or get Electric Pede rear wheels. Narrowing both sides will not change the track width, it just makes the tire narrower. :wink:
The SD2.2 has Electric Pede fronts narrowed to 1.25" (outer bead only) and it is under 12.5" wide even with the Red Rocks. 8)

http://www.rccrawlermedia.com/rcc-al...8623.sized.jpg

Well I thank you all for all the advice. But unfortunately I narrowed both sides and im at just under 12.75 so I dont know what im gonna do for the competition. On the 3rd, I guess ill have to get some more wheels and probably tires cause I dont want to pull the tires off again.

These are already narrowed wit hperfect backspacing for a 2.2 clod, and got mine down to 12" with red rocks and 11.75" with mashers. http://www2.towerhobbies.com/cgi-bin...?&I=LXLV90&P=7
http://www2.gpmd.com/image/h/hpic3033.jpg