|
| LinkBack | Thread Tools | Display Modes |
04-04-2011, 08:53 AM | #1 |
Rock Crawler Join Date: Mar 2010 Location: NRV
Posts: 958
| Anyone tried Integy shocks?
I've been looking at the shocks from Integy. Prices seems to good to be true. Anyone have anything good or bad to say about them? http://www.integy.com/st_prod.html?p_prodid=6140 |
Sponsored Links | |
04-14-2011, 06:38 AM | #2 |
Rock Crawler Join Date: Mar 2010 Location: NRV
Posts: 958
|
Guess not. I ordered 'em. $23. At least I know they look cool.
|
04-25-2011, 10:31 PM | #3 |
Quarry Creeper Join Date: Oct 2010 Location: Grandview, IA
Posts: 356
|
Haven't used those exact Integy shocks. However have used the shocks they have for SC trucks. They are beautiful, every aluminum anything from Integy is. The shocks required being completely unassembled and put back together but after that was deon they held oil and worked great.
|
04-27-2011, 07:14 AM | #4 |
Rock Crawler Join Date: Mar 2010 Location: NRV
Posts: 958
|
I got them and they do look really sweet. I haven't had a chance to put them on yet though.
|
06-17-2011, 01:35 PM | #5 |
Rock Crawler Join Date: Mar 2010 Location: NRV
Posts: 958
|
finnally got these shocks on. they didn't fit the ball knuckle on top so I had to rig something but other than that they went on pretty smooth. Had to put oil in them, again no big deal. They work fine but to be honest, I don't know that I would be able to tell the difference between these and stock. However, the stock shocks leak oil, I guess time will tell on the Integy. Bling meter is registering higher though... they do look cool.
|
06-27-2011, 08:48 AM | #6 |
Pebble Pounder Join Date: Apr 2008 Location: Las Cruces
Posts: 161
|
I am using the Integy shocks also. I got rid of all the ball knuckles on the truck and I am using Traxxas rod ends. On the upper shock mount I just bolted right to the chassis, on the lowers I cut 1/4" breakline for spacers. Works good but I am going to flip the cantilever system to see if I can get better flex. |
08-04-2011, 12:36 PM | #7 |
Rock Stacker Join Date: Jun 2011 Location: East Wenatchee
Posts: 77
|
Are these shocks longer than the stock cr-01 shocks? The stock ones seem pretty limited.
|
08-05-2011, 06:18 AM | #8 |
Rock Crawler Join Date: Mar 2010 Location: NRV
Posts: 958
| |
08-05-2011, 10:49 AM | #9 |
Rock Stacker Join Date: Jun 2011 Location: East Wenatchee
Posts: 77
| Ok sounds good , and mine leak also, planning on replacing them after I figure out how to set everything up to get maximum flex without torque twist and having one stiff spring in the rear.
|
02-05-2013, 12:05 PM | #10 |
Newbie Join Date: Dec 2012 Location: middleborough
Posts: 5
| Re: Anyone tried Integy shocks?
i have had on mine about 7mos and no problems .thet are very smooth and look nice too.
|
| |