RCCrawler Forums - Stock flex?

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Tamiya Txt-1 and Juggernaut (http://www.rccrawler.com/forum/tamiya-txt-1-juggernaut/)

- - Stock flex? (http://www.rccrawler.com/forum/tamiya-txt-1-juggernaut/1096-stock-flex.html)

jeep_boy02

07-21-2004 09:31 AM

Stock flex?

has anyone measured the amount of flex from the stock setup?

I took off the spacer at the end of the shock body and the rubber bump stop and I think I gained about and inch net of overall fex

DirkDigler

07-21-2004 09:33 AM

Re: Stock flex?

I believe that a bone stock TXT with the sway bars on, will net about 8 inches of upard travel. Eight inches is plenty of travel in rc crawling.

badger

07-21-2004 01:07 PM

Re: Stock flex?

Yep, here is a similar thread.

http://www.rccrawler.com/postt300.html

skyjacker_rc_club

07-21-2004 02:30 PM

Re: Stock flex?

i got 75* with out the sway bars and 87* after i changed the link mounts. :D

badger

07-21-2004 04:25 PM

Re: Stock flex?

I got 120* with bruit force! :flipoff:

skyjacker_rc_club

07-21-2004 09:54 PM

Re: Stock flex?

nice lol. what did you have to snap for that to work? :lol:

bustedcrawler

07-22-2004 01:58 AM

Re: Stock flex?

I can get my mostly stock TXT to measure out at 10.5" at the bottom of the tire, if you were to lift one tire up until one of the rears just about comes off of the ground.

If you want a visual on what an almost, very close to stock, TXT can do go here:

http://www.rccrawler.com/postt575.html

And yes, I drove my truck into all of the pics....Just ask Grizzly or Dirk!

Herzog-racing

07-28-2004 07:17 PM

Re: Stock flex?

I got 90* with no problem but I changed the bar to the top axle. best change I ever did

All times are GMT -6. The time now is 08:56 AM.