1:4 gear ratio Jugg axle http://img171.imageshack.us/img171/1...1310cl5.th.jpg http://img171.imageshack.us/img171/2...1312sh8.th.jpg i use a 12t pinion and a 40t gear modul1 changes the gear ratio from 1:2 to 1:4 and saves some weight , about 65g hope it works :mrgreen: |
That's cool! I've read about folks running Stampede trannies with TXT axles needing lower gearing...... this could be the hot set-up for them. ;) |
Nice! Lemme know if it works, I may borrow it... -WRM |
Where can this 40t gear module be purchased? Also, if your gear configuration is as you typed, a 12t pinion and a 40t module would only result in a 3.3:1 gear ratio. 40/12 = 3.33 ~ 3.3:1 |
dont forget the 15t and the 18t bevel gears 3.333*1.2 should be 3.99999999999 or 4 :mrgreen: |
Quote:
|
I want!!! :mrgreen: |
Thats pretty sweet..! Let us know what your gonna do about it.. I am interested.. |
Very cool deal! Makes me wonder why Tamiya didn't go with steeper gearing in the axles to begin with.... Anyhow, the 40tooth gear looks to be some sort of plastic. If so, are you concerned about durability? Please keep us posted! |
Nice mod.....yes, let us know how it works. Jay |
chassis in building http://snap30.photobox.co.uk/0616367...1002877357.jpg http://snap30.photobox.co.uk/6646060...472a411bc6.jpg http://snap30.photobox.co.uk/1231414...7c23d28ebf.jpg http://snap30.photobox.co.uk/7527491...87ad882086.jpg http://snap30.photobox.co.uk/1494060...9e12774a98.jpg aluminium tube 10x1mm dyna blaster tranny i think i can test the axles within the next few days :mrgreen: |
next step http://photos.fotango.com/p/eba00495889f00000129.jpg http://photos.fotango.com/p/eba00495889f00000130.jpg must run within the next 2 days |
A parts list for the gear change would be great. nice aluminium cage. |
Quote:
|
Quote:
|
i guess EGRESSor gone OT with the gears thread and shifted to his tuber. can we please get back to topic? tia! |
v33, it needs a chassis to test the axles :mrgreen: i am the next 2 weeks on Lanzarote and will let you know if it works like i think ;-) its a nice little thing http://photos.fotango.com/p/eba00495889f00000140.jpg http://photos.fotango.com/p/eba00495889f00000139.jpg http://photos.fotango.com/p/eba00495889f00000138.jpg http://photos.fotango.com/p/eba00495889f00000137.jpg http://photos.fotango.com/p/eba00495889f00000136.jpg http://photos.fotango.com/p/eba00495889f00000135.jpg |
Did you know I HATE you? That's exactly the kind of clean rockbuggy I was dreaming of! Now, would you be so kind to sent it here just ASAP ?:flipoff: J/K, ok I really like it, clean no-nonsense design. Have fun with it at Lanzarote, and remember we will be in trepidating waiting for the gears mod! :mrgreen: |
Ok , pretty please can we have some part #'s on the 4:1 gears ? ;-) We don't care if they have been tested or not. Better to get sevral rigs out there testing them I say. :mrgreen: |
after 20 hours no wear on the gears :mrgreen: http://photos.fotango.com/p/eba00495889f00000145.jpg smooth low noise running and a minimum of torque twisting :) dont know where you can get the parts in the US :roll: a modul 1 12T pinion for 5mm shaft and a modul 1 40T spur gear some action pics http://www.tamiyaclub.com/showroom_m...=45816&id=2511 http://www.tamiyaclub.com/showroom_m...=45823&id=2511 http://www.tamiyaclub.com/showroom_m...=45825&id=2511 |
All times are GMT -6. The time now is 09:50 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com