TxT-1 Juggernaut Gallery i know this has been done before but i've only seen 1 or 2 posts in all those threads. Lets try and get everybodys, truck conglomerated here. Post mods, electronics, anything you think is relavent. ************************* EDIED BY BADGER: Lets keep this thread for details and pics of your rigs only NO CHATTING. There are plenty of other forums/threads to get your chatting fix in. ************************* i'll start TXT-1 Super-rooster stock motors ( gd-600 and 9 tooth pins in mail) Futaba radio, receiver, and one servo Hitec servo Servo mounts coming soon Cut Chassis Relocated trans narrowed stock wheels with stock tires Wheelbase approx 15.5 http://captainsafetyman.com/Pictures/txt/IMG_1981.jpg http://captainsafetyman.com/Pictures/txt/IMG_1980.jpg |
Here's my TXT Cut chassis & trans 15 3/4" WB GD600 @ 2.5 : 1 & 9t INTEGY MSR4 Shocks (no Canti's) cut BFT's on narrowed TXT wheels and the usual locked diffs, traditional steering yada yada yada http://www.nor-calrcrc.com/albums/em...8744.sized.jpg |
3 Attachment(s) ROCTAPUS the Clod killing TXT. :-P WHEEL BASE-16 3/4" TIRE DIAMETER-7" WIDTH-15 1/4" DIFF. CLEAR.-2 1/8" TRANNY CLEAR-4 1/4" TOP OF FRAME-7 3/4" TOP OF BODY-9 5/8" WEIGHT-9 3/4 LBS. The rest of the stats are in the sig. |
TXT Hacked it, links flipped top to bottom T-Maxx driveshafts all twisted up Either a reverse Mag Mayhem or stock can on a GD-600 @ 2.5 with a 15 tooth inside Stock shocks, no springs, 80 wt oil Maximizer beadlocks with Ace's adapters Retarded narrowed and hacked stock tires that keep it entertaining by sucking TQ3 radio with Futaba 3305 servo (front steer only) Super Chicken http://img182.exs.cx/img182/4919/img03454vb.jpg That's my indoor rock pile. Who needs a dining room? |
Here's mine: Powered by Johnson 550 motor w/ 9T BFT's on Maximizer beadlocks 16" Wheelbase w/ re-located links and Revo driveshafts Cut chassis / tranny w/ 4.5" clearance Servo mounts from 1beatjeep, locked diffs, battery moved, etc TO DO: Mammoth gear reduction and rear steering Tree Crawlin' Pic http://i222.photobucket.com/albums/d...ler/Bigger.jpg |
New look for me. LSTs on Maximizers. And a Proline Toyota Land Cruiser body that needs some serious trimming, and lowering. http://img171.exs.cx/img171/9615/yellah5of.jpg http://img171.exs.cx/img171/9400/yellah26on.jpg |
TXT boyer chassis revo shafts emaxx tranny 55t motor on gd600 lst tires 15.5" wb http://img197.exs.cx/img197/157/boyers310bw.th.jpg |
Limestone cowboy specs TXT-1 Hacked frame Relocated trans. Lincoln locked diffs Savage shocks Revo drive shafts Moab tires on Outback rims Twin 55t lathe motors in series with 13t pinions Super rooster Single 645mg servo JR python radio Steel skid plate (new addition) Trans clearence 4.5" Axle Clearence 2.625" WB 15" Track (outsice to outside) 14.5" Top of frame 7.75" Top of shock tower 10.0" Top of body 10.2" All the photoos you could ever want http://pg.photos.yahoo.com/ph/neonrcr97/my_photos |
What classifies the rig a TXT? I still have a TXT chasis and tranny. Good enough? TXT chasis modified TXT tranny Orion motor(GD600 awaiting install) XFactor axles modified Revo shafts Narrowed Kongs Custom bead rings Savage Stubbies Custom steering 645's Shaved diffs(more clearance than Twin force axles) polished Xfactor shocks custom links 17.5 inch wheel base Sooper Rooster etc, etc, etc http://img193.exs.cx/img193/4499/dsc036564su.th.jpg |
Here's mine: http://pics.montypics.com/csr/2005-0...6_may04_05.jpg Check signature line for specs ;) |
4 Attachment(s) ok heres my 2 crawlers: ones a txt wid all the mods: GD600 15 3/4 " wb batteries up front tranny turned around super rooster esc 4 ws and all the rest of the stuff now the other is a full custom made from a bowlink legends car chasis wid clod axels , maxx shocks , custom carbon links , and all that other important sruff. |
couldnt get pic to come up, but its at this site http://www.streetsourcemag.com/uploa...733PM40401.jpg |
Jugger 2 Here's my Jugg 2 or what's left. I fabbed the chassis, links, mounts, and gear drive. http://i4.photobucket.com/albums/y13...r/IMG_2529.jpg http://i4.photobucket.com/albums/y13...r/IMG_2700.jpg 16" wb 15 3/4"track 4 7/8" gc 8 3/4" top of trans 10 3/4" top of body G-10 and aluminium 4-link chassis Chopped and dropped Jugg 2 trans w/TXT output Axle mounted Super Rooster and 6-cell 3600 mah battery Lathe motor w/2.44:1 gear drive Jugg 2 axles w/TXT outputs, alloy knuckles, TTRs, and Revos Moabs on narrowed Outbacks w/weights wo/foams 3PDF w/5645MGs and independent rear steering MRS4 piggybacks |
Here is mine. I posted a long time ago before the new board so just thought I would put some more up. http://img159.imageshack.us/img159/8517/30087bt.jpg http://img159.imageshack.us/img159/3982/30091li.jpg |
Heres mine Truck Base :TXT ESC:Supa roosta Motor(s):lathe Servo(s):hitec HS645MG Trans:txt GD 600 at 85:1 Axles:txt j/b welded Tires:stock WB:15" Overall Width:14" Diff clearance:2.5" Center Chassis clearance:4.5" Overall height:9.5" http://img221.imageshack.us/img221/6...atxt0076zg.jpg |
Standard hack and bash TXT-1. I've had this thing since before you could buy them in the US, but only recently did much to it. You can see my original work here: http://www.theshreves.com/rc_stuff/txt-1/ So I found this website/forum and did some reading and monkey-see-monkey-do type stuff. Right now I am trying to narrow up a set of Jumbo Kongs. WannaBeDigler, WTF method did you use? I am getting through it, but jeeeeez... Anyways, here you go: http://pics.theshreves.com/rc/txt1lapine060505f.jpg http://pics.theshreves.com/rc/txt1lapine060505c.jpg Some more recent ones: PIC3 PIC4 PIC5 PIC6 PIC7 PIC8 PIC9 |
2 Attachment(s) Here's mine, better pics will be added/swapped later... Chassis: TXT (REALLY hacked, soon to be replaced with custom plates) Axles: TXT (of course) locked with hot glue Tranny: TXT, bottom mounts shaved off, left-side motor location removed, layed down on its side, GD-600 Motor: Integy 55T, 21T on the motor, 18T on the GD Shocks: TMaxx, top of cap cut off, drilled, maxx rod end attached to cap WB: about 15.25 at the moment, will be extended to 16" shortly Links: custom link/shock mounts inside the axle, allowing for battery placement on top of the axle tube Elec: SR, Airtronics VG6000, 6cell GP3300's Wheels/Tires: Custom aluminum wheels with Heydco adaptors/ cut and sanded K-Rocks (newer compound) Servos: HSC-5998TG's, 250 oz.in. torque! Body: stock TXT, chopped up, shortened bed, antenna stitched in the bed |
|
My TXT Pics n Vids |
It's still a work in progress ..... Lessee - worked on: 20-30 hours - actually crawled on rocks: once. That'll change. http://www.rcpics.net/view_single.php?medid=60505 http://www.rcpics.net/view_single.php?medid=60504 |
heres my new one Truck Base : TXT-1 ESC: Super Chicken Motor(s): Integy 55T lathe (gd600 Servo(s):JR Trans:TXT Axles:TXT Tires:Imex jumbo swampers maximizer beadlocks WB: 15 3/4 " Overall Width: 22" Diff clearance: 2" Center Chassis clearance: 4 1/4" Overall height: 11" http://i257.photobucket.com/albums/h...Picture017.jpg http://i257.photobucket.com/albums/h...Picture002.jpg |
3 Attachment(s) Here are my three TXT's |
heres mine |
- TXT-1 base - Xtreme Racing Carbon Chassis - cut (WB=15.25") - Narrowed stock wheels - Stock tires - Locked diffs - epoxy - Revo shafts - Custom carbon servo mounts - Hitec 615MG servos w/savers and reverser - GD600 - Stock Mabuchi motor - Novak Super Rooster - NOT "Supa Roosta" - Fake beadlocks and other unimportant stuff... http://mysite.verizon.net/resohw2m/s...tures/side.JPG http://mysite.verizon.net/resohw2m/s...ures/done3.JPG http://mysite.verizon.net/resohw2m/s...ures/done6.JPG |
4 Attachment(s) My new shoes and shell. I love it! |
Truck Base : TXT-1 ESC: super rooster Motor(s): integy lathe on a gd600 Servo(s): hitec 645mgs front and back Trans:TXT Axles:TXT Tires: moabs on 40series outbacks WB: 17" Overall Width: 15" Center Chassis clearance: 5" Overall height: 11.5" 8" to top of frame P.S. sorry for the extreme size =\ http://img380.imageshack.us/img380/3384/00003612qy.jpg http://img389.imageshack.us/img389/3946/00003630lw.jpg http://img389.imageshack.us/img389/6711/00003620di.jpg http://img389.imageshack.us/img389/1363/00003646kf.jpg http://img389.imageshack.us/img389/2910/00003659nx.jpg (Changed to links for pictures, because they are waaaay huge ~ Mod) |
Green Machine heres my new crawler i built half of it sorta came almost custom built but i added the savage shocks tweaked some parts Specs: 40 series Moabs proline outback wheels behind the axle servo mount came this way savge shocks full ballberings cut chassis Gd 600 p2k motor tilted trans on to the pics already http://i14.photobucket.com/albums/a3...c/DSC01246.jpg http://i14.photobucket.com/albums/a3...k/DSC01210.jpg http://i14.photobucket.com/albums/a3...c/DSC01258.jpg http://i14.photobucket.com/albums/a3...c/DSC01250.jpg |
My Txt Crawler 16 Inch Wheel Base Home Made Rock Rings Locked Diffs Gd 600 Narrowed Jumbo Swamp Dawgs And More This is the first pic since finishing the upgrades: http://www.rcpics.net/img/68263 |
TXT1 - 16,8 Volt - EVX - steel diff locks more pics http://www.truckmonster.de/MODELLE_1...txt_l01400.jpg http://www.truckmonster.de/txt_l10400.jpg http://www.truckmonster.de/txt_l06400.jpg http://www.truckmonster.de/txt_team_losi06.jpg http://www.truckmonster.de/100_2810_500_text.JPG http://www.truckmonster.de/TREFFEN/100_2484_500.JPG |
Pic's Some snow pic's after making up some battery mounts on the axles. http://i27.photobucket.com/albums/c1...v/DSC03784.jpg http://i27.photobucket.com/albums/c1...v/DSC03788.jpg http://i27.photobucket.com/albums/c1...v/DSC03790.jpg last one sucks but you can see she was actualy driving though it. Man this thing can hall *** in the snow. |
|
Moonbuggy Pictures 5 Attachment(s) Here are current pictures of my new project! |
|
|
|
My TXT no longer looks like the previously posted pic of it, so I'll post a new one. Here it is in it's lastest incarnation...... http://pics.montypics.com/csr/2006-0...9_100_0047.jpg Specs: -TXT axles, JBWelded with ball bearings -Clocked and shaved TXT transmission with ball bearings -Homebuilt aluminum chassis -Integy threaded piggyback shocks -12.5" wheelbase -11.5" width with narrowed rear 'pede wheels and Masher's -one 55 turn motor with either a 9 or 13 tooth pinion, depending on the terrain -Novak Super Rooster -Hitec HS645MG servo -Traxxas TX and RX -7-cell stick pack mounted on the upper front suspension links |
Pics of my newly finished Rig Tubewerks T2 Chassis ( Awesome chassis ) TXT-1 Super-rooster stock motor and GD600 TQ3 Modded for rear stear and EPAs added Hitec Servos Wheelbase 17 http://img.photobucket.com/albums/v4...s/IM000418.jpg http://img.photobucket.com/albums/v4...s/IM000419.jpg |
|
|
All times are GMT -6. The time now is 07:54 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com