My late dad's CC01 re-build Hello from MNL! Here's a 23 year old kit of my dad that I am re-building. It was left in a storage at my parents house since my dad passsed away in 2003. Last year, I picked it up when I decided to get back to RCing and re-build it. Here it was when I got it from the storage https://i.imgur.com/Ey0Wg6Mh.jpg https://i.imgur.com/EklWMgfh.jpg First was upgrade the suspension with new 100mm shocks https://i.imgur.com/AYBsR02h.jpg Rear: https://i.imgur.com/kqa9L23h.jpg https://i.imgur.com/MbYYb6kh.jpg Front: I created a new shock tower and made holes on the chassis to accommodate the 100mm shocks... https://i.imgur.com/kH2FELhh.jpg https://i.imgur.com/x1mlUxKh.jpg https://i.imgur.com/SXGbU3th.jpg https://i.imgur.com/9Cu7Ouuh.jpg https://i.imgur.com/NNcLeKXh.jpg https://i.imgur.com/89L3bp6h.jpg Then next was replaced all plastic bushings with rubber sealed bearings https://i.imgur.com/Pvyz5qWh.jpg https://i.imgur.com/dM8buVuh.jpg https://i.imgur.com/HNYrlaah.jpg https://i.imgur.com/18k94sYh.jpg https://i.imgur.com/1c2PFlOh.jpg |
Re: My late dad's CC01 re-build Replaced the stock plastic hex hub to aluminum 12mm... https://i.imgur.com/xywB7zDh.jpg https://i.imgur.com/86Sse21h.jpg Wider wheel base by a few mm... https://i.imgur.com/ARa1Xu5h.jpg New set of wheels and tires... https://i.imgur.com/6wCYYoQh.jpg The stance... https://i.imgur.com/f3oUGmch.jpg Next was steering upgrade... Replaced the steering column to GPM aluminum steering set https://i.imgur.com/GTCJJAch.jpg https://i.imgur.com/tzvEhtuh.jpg https://i.imgur.com/Cv6Tclbh.jpg |
Re: My late dad's CC01 re-build Ordered (arrived yesterday) a PowerHD digital waterproof 20kg servo ($22) and some extra dogbones (4 pcs for $3) https://i.imgur.com/qlSukclh.jpg https://i.imgur.com/jZBetTKh.jpg https://i.imgur.com/W4CdcNch.jpg https://i.imgur.com/fNPdXIch.jpg I have also installed a new Radiolink RX. Ordered a brushed 60A brushed ESC and 27T & 55T motors yesterday. Should be here by next week (April 24-29). |
Re: My late dad's CC01 re-build Looks great. Good idea for fitting the longer shocks. Your dad would be proud. Glad to see it rebuilt rather than left and forgotten. Hope you enjoy using it. Sent from my SM-T820 using Tapatalk |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build Great use for an old rig "thumbsup" |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build I love this. Well done. |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build New arrivals and installed them... - 60A Waterproof brushed ESC from GoolRC bundled with 27t motor and another 55t motor https://i.imgur.com/RvilCLIh.jpg - LED light set https://i.imgur.com/QRbEzqRh.jpg Did a few thing during my spare time... - Changed the ESC's plug to deans https://i.imgur.com/j4qU37Kh.jpg https://i.imgur.com/ZwNROnlh.jpg - soldered the wires on the new motors https://i.imgur.com/sRMcGnVh.jpg - installed the new 55t motor and ESC. https://i.imgur.com/x4nDxsEh.jpg |
Re: My late dad's CC01 re-build Got a new battery and modified the battery bay to fit it... https://i.imgur.com/A9t3ciLh.jpg Replaced the plug to deans https://i.imgur.com/fwPbEHah.jpg Perfect fit https://i.imgur.com/IDeDEV2h.jpg https://i.imgur.com/co16OISh.jpg |
Re: My late dad's CC01 re-build Preparation for painting... Sanded down removed the "orange peel" effect from the previous paint. https://i.imgur.com/CdjXIx7h.jpg https://i.imgur.com/klpcEEjh.jpg https://i.imgur.com/CVYZfVWh.jpg Filled the antenna hole with putty. Covered the hole underneath first then applied the putty. https://i.imgur.com/4MaJYMRh.jpg https://i.imgur.com/TM2oaBWh.jpg https://i.imgur.com/0Bi2Iuzh.jpg https://i.imgur.com/tdbH12hh.jpg After sanding... https://i.imgur.com/7r8efmGh.jpg created holes for the tail lights... https://i.imgur.com/Fa2NduUh.jpg https://i.imgur.com/QsjoSSwh.jpg https://i.imgur.com/ukgNvOCh.jpg Need to improve and clean the edges of the holes with a file. |
Re: My late dad's CC01 re-build Keep up the good work [emoji106][emoji106] Sent from my SM-G965U using Tapatalk |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build This is going well! |
Re: My late dad's CC01 re-build My daughter requested a Teal color. So I mixed the color today and sprayed 5 coats as base color for the body using automotive polyurethane paint. Will cure the paint and start masking the flairs for secondary color (silver with a few drops/mix of yellow). Clear top coat next and wet sanding to remove minimal orange peel texture then 3 step buffing. Will detail the window trims, grill, light frames, signal lights, door handles, key slots and others too. Final touch will be the installation of the lights, front and back. https://i.imgur.com/1g5aS90h.jpg https://i.imgur.com/Q1aliReh.jpg https://i.imgur.com/9nqFabTh.jpg https://i.imgur.com/aOU5DlSh.jpg https://i.imgur.com/n9OWlpYh.jpg https://i.imgur.com/LJLFjlch.jpg |
Re: My late dad's CC01 re-build very nice, i forgot how old that kit really is until i saw the mechanical speed control, i have a montero cc-01, but it came with the newer esc (2008), i think. |
Re: My late dad's CC01 re-build So did the masking of the flairs and painted them to the secondary tone. https://i.imgur.com/L9SY111h.jpg https://i.imgur.com/jsqa0Z4h.jpg https://i.imgur.com/V02nvqmh.jpg *Masked the inner windows https://i.imgur.com/aY71S7mh.jpg https://i.imgur.com/2vKvr9Nh.jpg Masked everything else that should not be painted. https://i.imgur.com/64macUph.jpg https://i.imgur.com/0TG4RnAh.jpg Mixed the paint, catalyst and thinner. Color is silver with drops of yellow. https://i.imgur.com/3T8B6Xgh.jpg Painting... https://i.imgur.com/eGeaaZnh.jpg After curing the flairs overnight, I masked the signal and tail lights for silver https://i.imgur.com/rTJ9ssfh.jpg https://i.imgur.com/ZLXui0fh.jpg https://i.imgur.com/ROHIYwXh.jpg |
Re: My late dad's CC01 re-build Then sprayed... https://i.imgur.com/G3a3WHIh.jpg https://i.imgur.com/8Wi2fPFh.jpg Removed the masking once dried https://i.imgur.com/B6671wzh.jpg https://i.imgur.com/rARXOxRh.jpg Hand painted the clear orange and clear red lights https://i.imgur.com/RW5NJQHh.jpg https://i.imgur.com/RUjOF8eh.jpg Will spray the clear to coat tomorrow if the weather is good. Then wet sand, buff and finish the details of the window trims, grill, emblem, and install the lights. |
Re: My late dad's CC01 re-build Loving the colors, they compliment each other well. |
All times are GMT -6. The time now is 09:06 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com