My late dad's CC01 re-build Hello from MNL! Here's a 23 year old kit of my dad that I am re-building. It was left in a storage at my parents house since my dad passsed away in 2003. Last year, I picked it up when I decided to get back to RCing and re-build it. Here it was when I got it from the storage https://i.imgur.com/Ey0Wg6Mh.jpg https://i.imgur.com/EklWMgfh.jpg First was upgrade the suspension with new 100mm shocks https://i.imgur.com/AYBsR02h.jpg Rear: https://i.imgur.com/kqa9L23h.jpg https://i.imgur.com/MbYYb6kh.jpg Front: I created a new shock tower and made holes on the chassis to accommodate the 100mm shocks... https://i.imgur.com/kH2FELhh.jpg https://i.imgur.com/x1mlUxKh.jpg https://i.imgur.com/SXGbU3th.jpg https://i.imgur.com/9Cu7Ouuh.jpg https://i.imgur.com/NNcLeKXh.jpg https://i.imgur.com/89L3bp6h.jpg Then next was replaced all plastic bushings with rubber sealed bearings https://i.imgur.com/Pvyz5qWh.jpg https://i.imgur.com/dM8buVuh.jpg https://i.imgur.com/HNYrlaah.jpg https://i.imgur.com/18k94sYh.jpg https://i.imgur.com/1c2PFlOh.jpg |
Re: My late dad's CC01 re-build Replaced the stock plastic hex hub to aluminum 12mm... https://i.imgur.com/xywB7zDh.jpg https://i.imgur.com/86Sse21h.jpg Wider wheel base by a few mm... https://i.imgur.com/ARa1Xu5h.jpg New set of wheels and tires... https://i.imgur.com/6wCYYoQh.jpg The stance... https://i.imgur.com/f3oUGmch.jpg Next was steering upgrade... Replaced the steering column to GPM aluminum steering set https://i.imgur.com/GTCJJAch.jpg https://i.imgur.com/tzvEhtuh.jpg https://i.imgur.com/Cv6Tclbh.jpg |
Re: My late dad's CC01 re-build Ordered (arrived yesterday) a PowerHD digital waterproof 20kg servo ($22) and some extra dogbones (4 pcs for $3) https://i.imgur.com/qlSukclh.jpg https://i.imgur.com/jZBetTKh.jpg https://i.imgur.com/W4CdcNch.jpg https://i.imgur.com/fNPdXIch.jpg I have also installed a new Radiolink RX. Ordered a brushed 60A brushed ESC and 27T & 55T motors yesterday. Should be here by next week (April 24-29). |
Re: My late dad's CC01 re-build Looks great. Good idea for fitting the longer shocks. Your dad would be proud. Glad to see it rebuilt rather than left and forgotten. Hope you enjoy using it. Sent from my SM-T820 using Tapatalk |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build Great use for an old rig "thumbsup" |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build I love this. Well done. |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build New arrivals and installed them... - 60A Waterproof brushed ESC from GoolRC bundled with 27t motor and another 55t motor https://i.imgur.com/RvilCLIh.jpg - LED light set https://i.imgur.com/QRbEzqRh.jpg Did a few thing during my spare time... - Changed the ESC's plug to deans https://i.imgur.com/j4qU37Kh.jpg https://i.imgur.com/ZwNROnlh.jpg - soldered the wires on the new motors https://i.imgur.com/sRMcGnVh.jpg - installed the new 55t motor and ESC. https://i.imgur.com/x4nDxsEh.jpg |
Re: My late dad's CC01 re-build Got a new battery and modified the battery bay to fit it... https://i.imgur.com/A9t3ciLh.jpg Replaced the plug to deans https://i.imgur.com/fwPbEHah.jpg Perfect fit https://i.imgur.com/IDeDEV2h.jpg https://i.imgur.com/co16OISh.jpg |
Re: My late dad's CC01 re-build Preparation for painting... Sanded down removed the "orange peel" effect from the previous paint. https://i.imgur.com/CdjXIx7h.jpg https://i.imgur.com/klpcEEjh.jpg https://i.imgur.com/CVYZfVWh.jpg Filled the antenna hole with putty. Covered the hole underneath first then applied the putty. https://i.imgur.com/4MaJYMRh.jpg https://i.imgur.com/TM2oaBWh.jpg https://i.imgur.com/0Bi2Iuzh.jpg https://i.imgur.com/tdbH12hh.jpg After sanding... https://i.imgur.com/7r8efmGh.jpg created holes for the tail lights... https://i.imgur.com/Fa2NduUh.jpg https://i.imgur.com/QsjoSSwh.jpg https://i.imgur.com/ukgNvOCh.jpg Need to improve and clean the edges of the holes with a file. |
Re: My late dad's CC01 re-build Keep up the good work [emoji106][emoji106] Sent from my SM-G965U using Tapatalk |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build This is going well! |
Re: My late dad's CC01 re-build My daughter requested a Teal color. So I mixed the color today and sprayed 5 coats as base color for the body using automotive polyurethane paint. Will cure the paint and start masking the flairs for secondary color (silver with a few drops/mix of yellow). Clear top coat next and wet sanding to remove minimal orange peel texture then 3 step buffing. Will detail the window trims, grill, light frames, signal lights, door handles, key slots and others too. Final touch will be the installation of the lights, front and back. https://i.imgur.com/1g5aS90h.jpg https://i.imgur.com/Q1aliReh.jpg https://i.imgur.com/9nqFabTh.jpg https://i.imgur.com/aOU5DlSh.jpg https://i.imgur.com/n9OWlpYh.jpg https://i.imgur.com/LJLFjlch.jpg |
Re: My late dad's CC01 re-build very nice, i forgot how old that kit really is until i saw the mechanical speed control, i have a montero cc-01, but it came with the newer esc (2008), i think. |
Re: My late dad's CC01 re-build So did the masking of the flairs and painted them to the secondary tone. https://i.imgur.com/L9SY111h.jpg https://i.imgur.com/jsqa0Z4h.jpg https://i.imgur.com/V02nvqmh.jpg *Masked the inner windows https://i.imgur.com/aY71S7mh.jpg https://i.imgur.com/2vKvr9Nh.jpg Masked everything else that should not be painted. https://i.imgur.com/64macUph.jpg https://i.imgur.com/0TG4RnAh.jpg Mixed the paint, catalyst and thinner. Color is silver with drops of yellow. https://i.imgur.com/3T8B6Xgh.jpg Painting... https://i.imgur.com/eGeaaZnh.jpg After curing the flairs overnight, I masked the signal and tail lights for silver https://i.imgur.com/rTJ9ssfh.jpg https://i.imgur.com/ZLXui0fh.jpg https://i.imgur.com/ROHIYwXh.jpg |
Re: My late dad's CC01 re-build Then sprayed... https://i.imgur.com/G3a3WHIh.jpg https://i.imgur.com/8Wi2fPFh.jpg Removed the masking once dried https://i.imgur.com/B6671wzh.jpg https://i.imgur.com/rARXOxRh.jpg Hand painted the clear orange and clear red lights https://i.imgur.com/RW5NJQHh.jpg https://i.imgur.com/RUjOF8eh.jpg Will spray the clear to coat tomorrow if the weather is good. Then wet sand, buff and finish the details of the window trims, grill, emblem, and install the lights. |
Re: My late dad's CC01 re-build Loving the colors, they compliment each other well. |
Re: My late dad's CC01 re-build Great job so far! It's cool to see a retro car brought back to life. Can't wait to see more. |
Re: My late dad's CC01 re-build Quote:
Quote:
|
Re: My late dad's CC01 re-build Cleaned and buffed the windows. The stains couldn't be removed with just soap so I had to rub it down with buffing compound and a buffing machine. Before: https://i.imgur.com/EbiV28vh.jpg https://i.imgur.com/gcFhJU0h.jpg After https://i.imgur.com/jIExbeJh.jpg https://i.imgur.com/FLn2Hwgh.jpg Sprayed 5 layers*of clear gloss top coat. https://i.imgur.com/Pqumg9zh.jpg https://i.imgur.com/zy3NKkUh.jpg https://i.imgur.com/53YKpzVh.jpg Will wet sand and buff tomorrow once the clear coat is cured and do the window side panels, mpulding, grill, door handles and rear plate garnish with flat black. Then install the lights. |
Re: My late dad's CC01 re-build So I wet sanded the entire body and 3-step buffed it. Wet sanded... https://i.imgur.com/o3Hv7ZSh.jpg *Buffed... https://i.imgur.com/7omAt01h.jpg https://i.imgur.com/fUi14zvh.jpg https://i.imgur.com/DCsHkfch.jpg Seen here are the metallic flakes... https://i.imgur.com/0k2Hzlhh.jpg https://i.imgur.com/YPMImJLh.jpg Prepped for masking (again)... https://i.imgur.com/jtnSmmJh.jpg https://i.imgur.com/TtgD0oxh.jpg https://i.imgur.com/QEgQa2gh.jpg https://i.imgur.com/ejiifYch.jpg https://i.imgur.com/uZj3TLGh.jpg Painted all the parts that should be in matte black https://i.imgur.com/Wpis9P9h.jpg https://i.imgur.com/8Nol6E6h.jpg https://i.imgur.com/890NgDqh.jpg https://i.imgur.com/docD4eSh.jpg |
Re: My late dad's CC01 re-build Mask off... https://i.imgur.com/CMF7oV3h.jpg Finishing touches... Tri-diamond emblem painted and some panel lines. https://i.imgur.com/bY6rDKwh.jpg Fabricated the lens for the tail lights. MAde some grid lines, repainted to clear red and added frosting too https://i.imgur.com/0NkLr5ch.jpg https://i.imgur.com/dKtKt0nh.jpg https://i.imgur.com/ObY9TyEh.jpg https://i.imgur.com/8LZdoHgh.jpg Finished body and lights installed too... https://i.imgur.com/mX8cRvdh.jpg https://i.imgur.com/hrnj5lhh.jpg Now mounted on the chassis... https://i.imgur.com/Kuk2pqEh.jpg https://i.imgur.com/SFQu0GZh.jpg https://i.imgur.com/uHS23Ouh.jpg https://i.imgur.com/IxRXRqgh.jpg https://i.imgur.com/O4IL7tNh.jpg With lights on... https://i.imgur.com/7nHWFwkh.jpg https://i.imgur.com/qBPWbfBh.jpg |
Re: My late dad's CC01 re-build WOW! Fantastic job on the body! It turned out great. Nice detail on the black trim and the lenses for the lights. Nice metallic flake, I didn't notice that before. |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build That paint looks great! Wish I had the patience haha Sent from my iPhone using Tapatalk |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build So some parts arrived yesterday... Rear suspension link, aluminum shock and suspension link mount, aluminum servo mount, bead-lock metal wheels. https://i.imgur.com/FKggULlh.jpg Installed... https://i.imgur.com/3pAYyJ0h.jpg https://i.imgur.com/Md7Qx36h.jpg https://i.imgur.com/RZDLAiQh.jpg Aluminum servo mount... https://i.imgur.com/92OHwVyh.jpg Bead lock wheels... https://i.imgur.com/2pdIX1Ih.jpg Installed a fan for the motor. I fabricated a CF plate to mount the fan onto it... https://i.imgur.com/9ied2RVh.jpg https://i.imgur.com/EQ60iJRh.jpg https://i.imgur.com/pR3sGJmh.jpg https://i.imgur.com/g4EtDxrh.jpg With the new wheels... https://i.imgur.com/YxL8sYZ.jpg https://i.imgur.com/cpTkLmS.jpg Still waiting for new aluminum parts for the front suspension and YR aluminum steering set.*Will update soon. |
Re: My late dad's CC01 re-build Great transformation, I'm sure your dad would be proud. ... "thumbsup" |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build So I've had this pair of shock mounts since last March and I have never really decided whether to use it or not. https://i.imgur.com/t5Xew6Th.jpg I was contemplating on creating holes on the rear part of the chassis to install this but the 100mm shocks doesn't need to stretch out in the back like it needs in front. But since the original mount of the CC01 is plastic, I decided to use this aluminum mounts and place it sideways. In that way, it can be adjusted to many setting. Forward, backward, higher or lower. The result is great. https://i.imgur.com/Oao0Cklh.jpg https://i.imgur.com/aaNtK6fh.jpg https://i.imgur.com/8Gcpj7mh.jpg I also installed strut bars using some spare adjustable links I had, front and rear. It actually helped a lot in stiffening the chassis. https://i.imgur.com/YkZp7cih.jpg https://i.imgur.com/kz7WvU1h.jpg |
Re: My late dad's CC01 re-build Great looking CC01 inside and out, keep up the great work! |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build This is really great. Nice truck and a fitting tribute. |
Re: My late dad's CC01 re-build Quote:
|
Re: My late dad's CC01 re-build Bought new sets of 100mm (grey) and 110mm (blue) shocks to replace the front dampers. The middle one is the nicest of the three. Better rebound and very smooth damping. https://i.imgur.com/ClU415yh.jpg https://i.imgur.com/QBQAjW7h.jpg |
Re: My late dad's CC01 re-build The ESC and servo are waterproof but the RX isn't. So I ordered a case for the RX and fabricated a new ESC tray from a 2mm carbon fiber plate. Re-arranged the wires and concealed what I could to make it look cleaner. https://i.imgur.com/5br2UgGh.jpg https://i.imgur.com/3iBX5YQh.jpg |
Re: My late dad's CC01 re-build Went crawling today with the bigger crawlers (Axial, Traxxas, AE, etc). My CC01 was surprisingly good. Although it couldn't crawl up the very steep areas but it still manage to get to most areas in the mini mountain. https://i.imgur.com/IdK63Vth.jpg https://i.imgur.com/4gdlFF9h.jpg https://i.imgur.com/v2BEwY6h.jpg https://i.imgur.com/uV2Mq74h.jpg https://i.imgur.com/tPgX4L3h.jpg https://i.imgur.com/tmwSbRah.jpg https://i.imgur.com/c7i3SGMh.jpg https://i.imgur.com/EWKhOeih.jpg https://i.imgur.com/2HxhERFh.jpg https://i.imgur.com/NYYQxpSh.jpg https://i.imgur.com/hTm4SF3h.jpg https://i.imgur.com/LLztb3hh.jpg https://i.imgur.com/lXXElAvh.jpg |
All times are GMT -6. The time now is 11:52 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com