07-14-2010, 01:10 PM | #1 |
Pebble Pounder Join Date: Oct 2008 Location: Oshawa, Ontario Canada
Posts: 150
| Tekin 21.5 motor test
Here's a short vid of my first run with the Tekin 21.5 sensored brushless in my crawler. It seems to be better then the old Losi motor but is still cutting out at times for no reason at all, if you watch the vid you can here me working the triger on the controler tring to get it going again then it will just jump to life again. Any idea WTF is wrong I'm ready to scream...... I'm using a JR Racing xs3 Pro radio 10 years old or so, Tekin 21.5 motor new, Mamba Max Pro Esc new, Turnigy 1500 mAh 11.1v 20-30C lipo new. [URL="http://http://www.youtube.com/watch?v=qlC3yachIow"] Last edited by Needboost; 07-14-2010 at 10:13 PM. |
Sponsored Links | |
07-14-2010, 01:51 PM | #2 |
RCC Addict Join Date: Jun 2009 Location: California
Posts: 1,494
|
Vid didn't work.
|
07-14-2010, 02:53 PM | #3 |
Rock Crawler Join Date: Aug 2008 Location: B.C.Canada
Posts: 608
|
vid no worky i run a 21.5 in mine...tons of torque and wheelspeed |
07-14-2010, 04:09 PM | #4 | |
RCC Addict Join Date: Jun 2009 Location: California
Posts: 1,494
| Quote:
threads on the 1st page that talk about this issue. | |
07-14-2010, 07:20 PM | #5 |
Pebble Pounder Join Date: Dec 2009 Location: virginia beach
Posts: 172
|
yeah I bit the bullet and bought a tekin fxr pro system 17.5 = nasty
|
07-14-2010, 10:15 PM | #6 |
Pebble Pounder Join Date: Oct 2008 Location: Oshawa, Ontario Canada
Posts: 150
|
Don't know why my video won't work?
|
07-15-2010, 01:06 AM | #7 |
RCC Addict Join Date: Jun 2009 Location: California
Posts: 1,494
| |
07-15-2010, 05:29 AM | #8 |
Pebble Pounder Join Date: Dec 2009 Location: virginia beach
Posts: 172
|
no no lol nasty = sweet lol
|
07-15-2010, 04:24 PM | #9 |
Pebble Pounder Join Date: Jun 2010 Location: Gresham
Posts: 136
|
i have the mmp with a novak 17.5 with stock rotor and only have a problem in a tight jam and only going very low speed and onle once in a great while. the biggest problem i had was with the start power when i had it on high it would cog real bad going up real slow on high inclines but i put it back down to low and no more problems.
|
07-15-2010, 04:32 PM | #10 |
RCC Addict Join Date: Oct 2009 Location: In the thinking chair
Posts: 991
|
Are you still running the 18 tooth? I use a 14 or 15. Try changing the start power setting like owenwolf said too.
|
| |