|
| LinkBack | Thread Tools | Display Modes |
10-25-2009, 06:44 AM | #1 |
Rock Stacker Join Date: Mar 2009 Location: Holland
Posts: 61
| My "Subaru" Moa LCC (with pic's)
I recieved mij LCC last friday and started with the paint job: Today i took appart my axles. I hope if someone can tell me if the spools and the CVD's are the right one's. Everything is brand new because i did not run the car yet. Here is the front gear and the CVD's: and here is the spool from the rear axle: I will also send a PM to Rich because is was missing two kingpin screws (A6248 ) Last edited by imprezapino; 12-26-2009 at 06:54 PM. Reason: new title |
Sponsored Links | |
10-25-2009, 07:20 AM | #2 |
Newbie Join Date: Oct 2008 Location: Phoenix
Posts: 8
|
Love the Subaru paint job. I am a huge Subaru mark myself..
|
10-25-2009, 07:43 AM | #3 |
Rock Crawler Join Date: Oct 2008 Location: Sandy, OR
Posts: 672
|
Rear axle gear looks incorrect from the picture. Front one looks good.
|
10-25-2009, 07:46 AM | #4 |
Rock Crawler Join Date: Aug 2008 Location: Portland, Maine
Posts: 625
|
Subies rule!
|
10-25-2009, 07:49 AM | #5 |
Quarry Creeper Join Date: Mar 2009 Location: Surprise, AZ
Posts: 494
|
Yep, like davec said, front looks good... The CVDs are not v3, but we'd have to see the pin slot where its cut to know if its v1 or v2. The v1's have a rough cut that will extend onto the tapered neck, v2's were cut with the right tools and the pin slot will not exxtend onto the tapered neck. Regardless, order a set of v3s asap.
|
10-25-2009, 08:13 AM | #6 |
Rock Stacker Join Date: Mar 2009 Location: Holland
Posts: 61
|
Ok thanks guy's I have already send an PB to Rich. So it looks like mij rear worm is a wromg one. Here are three extra pic's from my CVD's: |
10-25-2009, 08:52 AM | #7 |
Newbie Join Date: Mar 2009 Location: Dickson
Posts: 37
|
Those are the old ones. The slot cut for the pin to move in goes all the way down through the skinny part of the driveshaft making it weaker.
|
10-25-2009, 10:26 AM | #8 |
Quarry Creeper Join Date: Mar 2009 Location: Surprise, AZ
Posts: 494
|
Yep, V1's... You can go on Losi's website, they have an email address there that you can send a note to and they will send you replacements.
|
10-25-2009, 11:38 AM | #9 |
Rock Stacker Join Date: Mar 2009 Location: Holland
Posts: 61
|
Thanks jason. I haven send a e-mail and PM to Rich: 'rtrujillo@horizonhobby.com' Hopefully he wil send me the replacement parts. |
10-25-2009, 11:44 AM | #10 |
Rock Stacker Join Date: Mar 2009 Location: Holland
Posts: 61
|
For those who haven't seen it: Some pictures of my Tamiya CR-01 crawler also in WRC style: |
10-25-2009, 09:09 PM | #11 |
Newbie Join Date: Oct 2009 Location: Southern
Posts: 7
|
I like how you have the shocks mounted on that scale rig.
|
10-25-2009, 11:28 PM | #12 |
I wanna be Dave Join Date: Sep 2008 Location: behind the wheel of a monster truck...
Posts: 2,878
|
Awesome Losi man..I am liking the rally look body's..Very cool for sure.. |
10-26-2009, 12:42 PM | #13 |
Rock Stacker Join Date: Mar 2009 Location: Holland
Posts: 61
| |
10-27-2009, 06:08 PM | #14 |
Rock Stacker Join Date: Jun 2009 Location: Portland
Posts: 89
|
that's awesome! I still have those stickers too from my tt01. have fun with it.
|
10-27-2009, 06:34 PM | #15 |
I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind
Posts: 6,386
|
Love the paint on both. The second worm gear pic is deceiving. Your pic is canted slightly left so the gears look straight cut. If the pic was straight, it looks like teeth may slant right. If that is the case, they are correct. |
10-28-2009, 04:47 PM | #16 |
Rock Stacker Join Date: Mar 2009 Location: Holland
Posts: 61
|
The rear spool was a bad one and wil be replaced. Rich took a look at the pictures and the replacement parts will be shipped this week !!!! for Rich and Losi Last edited by imprezapino; 10-28-2009 at 04:49 PM. |
12-26-2009, 03:44 PM | #17 |
Rock Stacker Join Date: Mar 2009 Location: Holland
Posts: 61
|
Finally all the parts for the MOA conversie have arrived. Setup: 2x EZRUN brushlessset with: 2x 17.5T motor and 2x de 60A esc. Both systems are sensored but have no noticible cog. Home made Dig unit for front en rear dig . The car has a Castle Creations CCBEC. I'm running it with a Spektrum DX3R system. It was difficult to get in alle the elektronics but i did it. It could be nicer but the car is ready to some heavy testing |
12-26-2009, 04:47 PM | #18 |
I wanna be Dave Join Date: Sep 2006 Location: Stuck on a Rig in the middle of nowhere Utah.
Posts: 2,024
|
I just can't get nough of that paint job. Great job .
|
12-26-2009, 08:45 PM | #19 |
Pebble Pounder Join Date: Dec 2007 Location: Tucson, AZ
Posts: 142
|
good lookin build so far
|
12-26-2009, 10:10 PM | #20 |
Rock Crawler Join Date: Jan 2009 Location: San Gabriel, Crawlerfornia.
Posts: 507
|
what battery are you using.
|
| |