|
| LinkBack | Thread Tools | Display Modes |
03-03-2013, 03:10 AM | #1 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| kbogger's 2013 shafty build
Ive never really done a build thread but i had a great idea for a chassis so I thought I would share. Ive had my Losi a little over a year, it started out as a night crawler and transformed several times. I recently got bored with the stock chassis, I know it can be built to work very well but I cant leave well enough alone. Ive always liked the UGC FF-4 chassis so I started to shop for one, earlier this week i bought one from the classifieds with an undrilled skid. It showed up yesterday so i figured i would start on it tonight. Heres what I got so far. It took a little work with some files and my dremel, it fit nicely. |
Sponsored Links | |
03-03-2013, 03:14 AM | #2 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
Here is a really rough mock up with spare links but i got 12.5" by swapping some rod ends around. I havnt decided on my shocks yet, its between lcc shocks or cap modded scx10's a quick run down: tekin rs tekin redline 17.5 14t pinion fmj mod axles with hd gear in front hitec 7954 with cc bec shaved white rovers C.I. DD foams custom delrin axle plate turnigy 3s 850mah batteries VP V2 wheels 850 and 600 hubs Last edited by kbogger81; 03-03-2013 at 03:21 AM. Reason: adding specs |
03-03-2013, 07:35 AM | #3 |
RCC Addict Join Date: Jan 2011 Location: Razorback Haven
Posts: 1,620
| Re: kbogger's 2013 shafty build
Nice work! |
03-03-2013, 08:36 AM | #4 |
Rock Crawler Join Date: Oct 2011 Location: Great Outdoors
Posts: 651
| Re: kbogger's 2013 shafty build
Nice look. Gotta get that motor lower.
|
03-03-2013, 08:54 AM | #5 |
Pebble Pounder Join Date: Oct 2012 Location: Plattsmouth
Posts: 184
| Re: kbogger's 2013 shafty build
Looks cool! Keep up the good work!
|
03-03-2013, 01:06 PM | #6 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
Thanks guys. Id like to lower the motor but its stuck there till I can figure out how to do it.
|
03-03-2013, 02:38 PM | #7 |
Newbie Join Date: Apr 2009 Location: Fruita
Posts: 46
| Re: kbogger's 2013 shafty build
hows the wheel speed with the 17.5?
|
03-03-2013, 04:40 PM | #8 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
Its just enough for my driving, I don't know what I could compare it to but the ax10 guys at our local comps say its peppy for a losi.
|
03-04-2013, 02:55 PM | #9 |
Quarry Creeper Join Date: Jan 2012 Location: on the other side of the tracks from baldy
Posts: 380
| Re: kbogger's 2013 shafty build
Looking good heath better hurry comp is coming up
|
03-04-2013, 03:12 PM | #10 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
I shoulda held off a week for this project but I'll have it thrown together in time hopefully.
|
03-05-2013, 06:03 PM | #11 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
I made a little more progress, i went with my trusty lcc shocks( gold springs-30 wt oil front- 40 wt oil in rear). I used half of a jeepindoug losi shock standoff and a 4-40 nut drilled out to 1/8" for mounting, btw these standoffs are awesome they make the upper mount extra smooth. I also scored a few extra parts with this chassis, it came with gunnar body mounts and they almost line up perfect with the mounting holes i already had in my body. |
03-05-2013, 06:09 PM | #12 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
I have it in my redneck chassis jig now, i got my shock angles where they look right now on to working out some links. I have my lengths estimated pretty close, ill be cutting down some 5/16" delrin lowers ive been using a while. Ive skimmed through idk how many threads and posts about these chassis's, all my measurements are based closely to what has been proven with ax10 based rigs. The Losi stock geometry is very very similar to the ff4 it sure makes things easy. |
03-20-2013, 12:41 PM | #13 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
Thanks, I have alot of updates to post when I get some free time.
|
04-06-2013, 08:57 PM | #14 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
Well it's been a while since i've had much time for the losi, I recently bought an scx10 jk kit so the rush to build it went ahead of progress. Now that is finished and i also finished up my comp crawler so here's some updates. picked up some lunsford Ti links from Crawler Innovations and some delrin link sliders from D Lux fab. getting the lengths right took quite a bit of measuring and research but they turned out perfect. I went thru several options for electronics placement and settled on this, I also got some new Gunnar body mounts with delrin braces. I ditched the crowd pleazer body for an xciter just for better rollovers. This may be the worst color choices ever but they are growing on me, I had a few cans of paint to finish off. Last edited by kbogger81; 04-06-2013 at 08:58 PM. Reason: resize |
04-06-2013, 11:52 PM | #15 |
Newbie Join Date: Jun 2009 Location: San Diego
Posts: 45
| Re: kbogger's 2013 shafty build
That thing is rad!
|
04-07-2013, 02:38 AM | #16 |
Pebble Pounder Join Date: Dec 2011 Location: riding the rails
Posts: 132
| Re: kbogger's 2013 shafty build
thanks I just gotta learn how to drive it now.
|
04-07-2013, 10:03 AM | #17 |
Newbie Join Date: Jun 2009 Location: San Diego
Posts: 45
| Re: kbogger's 2013 shafty build
Im right there with ya haha. Testing, tweaking, driving |
kbogger's 2013 shafty build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
xkill's 2013 build | xkill | RC4WD Bully | 90 | 03-25-2019 04:00 PM |
My 2.2 pro shafty build | 99xjlove | Axial AX-10 Scorpion | 41 | 05-09-2013 05:28 PM |
2013 Team Brood ECC Shafty Class | helhedded | East Coast Championship | 51 | 04-29-2013 08:10 AM |
My shafty build | mmatthews | Axial AX-10 Scorpion | 102 | 08-15-2012 07:24 AM |
Vp Incision Shafty Build...3...2...1 | Sneed | Team Losi Comp Crawler | 44 | 07-21-2011 07:02 PM |
| |