RCCrawler Forums - Maximizer offset & backspacing

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Tires and Wheels (http://www.rccrawler.com/forum/tires-wheels/)

- - Maximizer offset & backspacing (http://www.rccrawler.com/forum/tires-wheels/19218-maximizer-offset-backspacing.html)

swell searcher

11-15-2005 01:14 PM

Maximizer offset & backspacing

What is the offset and backspacing for the standard Maximizer Beadlocks? I got a set coming from NitroRC Ed and wanted to see which adaptors to buy for my clod.

TIA, Randy

EeePee

11-15-2005 01:49 PM

Just like a normal Maxx wheel. So you'll want Heydco, or Thunder tech, or something that adds a little width.

I just put mine on the TXT and with Thunder Tech adapters and Mashers the overall width is 13.5 inches. Clod will be the same.

lvl1	11-15-2005 05:15 PM

I have a clod, w/RCGUY wheel adapters and used Maximizer X75 beadlocks. Makes the width about 13+/- inches

Madcratebuilder

11-16-2005 09:37 AM

Quote:

Originally Posted by swell searcher

What is the offset and backspacing for the standard Maximizer Beadlocks? I got a set coming from NitroRC Ed and wanted to see which adaptors to buy for my clod.

TIA, Randy

The standrad backspace is 42mm (1 21/32)
X75 is 23mm (29/32)

niggle

11-16-2005 09:59 AM

do you think that x75s with heydco adapters and lsts will be to wide?

EeePee

11-16-2005 02:48 PM

Not too wide with the tall LSTs, but the steering servo will be working pretty hard to turn the tires.

swell searcher

11-16-2005 02:55 PM

thanks for the replies.

Super Mario

11-20-2005 01:25 PM

yea I have some wideners on my clod with 5 hole maximizers. I dont know which wideners but they look like black derlin ones. If I mounted the wheels normally I found that it scrubbed the links, so I had to flip the center part of the wheel but it makes it too wide. I still need to find some different adapters or something.

All times are GMT -6. The time now is 08:48 PM.