|
| LinkBack | Thread Tools | Display Modes |
06-20-2015, 09:39 AM | #1 |
Pebble Pounder Join Date: Feb 2015 Location: Mount Morris
Posts: 174
| cutting colsed cell C.I. foams?
C.I. has been out of the narrow 6" and 5.5" closed cell inners for awhile now. i was sent a email saying that they would be back on c.i.'s web site in 1 day but that was 10days ago. unless i just cant find them on the site, there still not available. ive sent plenty of emails since, but i dont get any response now. this is also my 1st time buying foams from c.i. so i really dont know where everything is on there site or what to expect as far as service and wait times for out of stock foams. so my question is, has anyone tried cutting the standard width inners to narrow them and how hard is it to get all 4 the same?
|
Sponsored Links | |
06-20-2015, 09:57 AM | #2 |
I joined the Band! Join Date: Dec 2014 Location: Earth
Posts: 1,188
| Re: cutting colsed cell C.I. foams?
These?? I didn't see anything that specified "narrow" on the inner foams. 5.5 Double Deuce Inner Foam Pair (2) 6.0 Double Deuce Inner Foam Pair (2) There's inner/outer sets in narrow. http://www.crawlerfoams.com/index.ph...mart&Itemid=65 http://www.crawlerfoams.com/index.ph...mart&Itemid=65 Last edited by Eric0424; 06-20-2015 at 10:07 AM. |
06-20-2015, 10:04 AM | #3 | |
Pebble Pounder Join Date: Feb 2015 Location: Mount Morris
Posts: 174
| Re: cutting colsed cell C.I. foams? Quote: UPDATED 10/23/2014 If you are using Vanquish Products or other brand .7" wide wheels, please buy the narrow foams. All other wheel sizes (1" - 1.50") use the standard width. | |
06-20-2015, 10:15 AM | #4 |
I wanna be Dave Join Date: Nov 2009 Location: Chico now
Posts: 2,384
| Re: cutting colsed cell C.I. foams?
If you have a drill or drill press and a 2" hole saw it's fairly easy. Chuck hole saw in drill press, turn on, razor blade for narrowing, grinder with a 60grit or so flap disc works well for reducing the diameter. |
06-20-2015, 10:16 AM | #5 | |
Pebble Pounder Join Date: Feb 2015 Location: Mount Morris
Posts: 174
| Re: cutting colsed cell C.I. foams? Quote:
thanks eric0424! | |
06-20-2015, 10:37 AM | #6 |
I joined the Band! Join Date: Dec 2014 Location: Earth
Posts: 1,188
| Re: cutting colsed cell C.I. foams? |
06-20-2015, 07:59 PM | #7 |
I wanna be Dave Join Date: Jan 2004 Location: Detroit
Posts: 3,583
|
Sharp long razer blade works. Set height or razer and slide foam on twisting it and walls.
|
06-20-2015, 11:17 PM | #8 |
Rock Crawler Join Date: Jan 2004 Location: Round Rock, TX
Posts: 597
| Re: cutting colsed cell C.I. foams? This is brilliant. I actually want to make my inners wider using tuning disks, and was going to do something similar, but use a dremal cutoff wheel chucked in the press and slide the inner into it, instead of putting the inner over the hole saw. I just wasn't sure if the cutoff wheel would be thick enough.
|
06-21-2015, 09:05 AM | #9 | |
I wanna be Dave Join Date: Nov 2009 Location: Chico now
Posts: 2,384
| Re: cutting colsed cell C.I. foams? Quote:
| |
cutting colsed cell C.I. foams? - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cutting foams?? | Crawlin Ballin | Tires and Wheels | 2 | 12-20-2014 09:52 PM |
cutting foams | vic0280 | Tires and Wheels | 15 | 01-13-2008 12:26 PM |
Cutting Foams | Swiss | Newbie General | 13 | 11-02-2007 04:01 PM |
Cutting foams | ecoli | Newbie General | 7 | 09-08-2007 12:13 AM |
| |