RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Tires and Wheels (http://www.rccrawler.com/forum/tires-wheels/)
-   -   BB's in tires? (http://www.rccrawler.com/forum/tires-wheels/823-bbs-tires.html)

fireman 06-22-2004 11:26 PM

BB's in tires?
 
How many BB's are people putting in there tires as a starting point?

Thanks for the info,

Fireman

Grizzly4x4 06-23-2004 12:27 AM

Re: BB's in tires?
 
I tried 1.5 35mm film canisters in each tire and found it to be too much. I think that with a Clod too many bb's really hurts because you only have one motor driving the front axle. With a shaftie and dual motors you can get away with more bb's.
I plan to try one film cannister in each tire and see how that does.

Good luck!

DirkDigler 06-23-2004 09:45 AM

Re: BB's in tires?
 
I had a pound of bb's in each tire and recently went to 2 pounds, which really proved to be too much. I am going back to one pound in the fronts and a half pound in the rear. My god.......it sounds like I'm ordering meat from a deli!!!!!!

One last note: I may ditch the Kongs in favor of the new KROCK tires. I can't wait to try them out to see if they are worth. I have big plans for change if they work well.

fireman 06-23-2004 10:30 AM

Re: BB's in tires?
 
I am going to try the clod "D" tire when it's available. For know I am going to use narrowed clod tires. I am going to try the BB's.


Fireman

ultralord 06-23-2004 11:42 AM

Re: BB's in tires?
 
so how you getting the bb's in and out of the tires if they are glued? other that breaking the glue bead.

Grizzly4x4 06-23-2004 11:47 AM

Re: BB's in tires?
 
My bb tires are MGT's with only the inner bead glued to the rim. The tire fits tight enough that they do not slip even without glue, but I left it unglued so that I could experiment with the bb's. :wink:

DirkDigler 06-23-2004 12:34 PM

Re: BB's in tires?
 
Not that I am doing this every day to add and remove bb's but I just cut a very small slit into the tires tread, squeeze it open a bit and pour them in or out. Break out the IC-2000 and patch it up when done! Never had it tear back open.

Ace 06-23-2004 12:35 PM

Re: BB's in tires?
 
C-section bb removal!

:flipoff:

You don't pass up any chance to cut,mame and glue up tires do ya?

:P

DirkDigler 06-23-2004 01:24 PM

Re: BB's in tires?
 
Exactally!! :lol:

badger 06-25-2004 03:29 PM

Re: BB's in tires?
 
I use 1,658,492,023 bb's in my front tires and 45,822,576 bb's in my rear tires. :flipoff: :flipoff:

I am running low in my red rider bb gun so the rear tires might be getting a little lighter!

bajabeast 06-29-2004 12:01 PM

Re: BB's in tires?
 
what do bb's do to the tire? and dont they get annoying when they keep rolling around with the plastic or aluminum wheels

DirkDigler 06-30-2004 07:29 AM

Re: BB's in tires?
 
They add weight that sits directly on the ground.

They are not annoying when they help you climb vertically!!!!

spinner 07-14-2004 04:39 PM

Re: BB's in tires?
 
Has anyone tried using wheel weights. the stick on type? I'm going to try it tonight.


All times are GMT -6. The time now is 10:23 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com