RCCrawler Forums - micro hex driver

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Tools, and Procedures (http://www.rccrawler.com/forum/tools-procedures/)

- - micro hex driver (http://www.rccrawler.com/forum/tools-procedures/589622-micro-hex-driver.html)

ed1	09-16-2017 11:04 AM

micro hex driver

is there anywhere i can get a get a quality 1mm hex driver from for my micro.dont like using allen-keys!

Natedog

09-16-2017 04:17 PM

Re: micro hex driver

Yes, Wera is king of tiny drivers, very high quality, I've got a couple. Everything can break or strip at this size, but I've got a lot of use out of mine so far. Bought them on friend's recommendation. KCToolco.com is where I bought them. 8)
https://www.kctoolco.com/brands/Wera.html

Checked and mine are both 0.9mm, they make all kinds of high quality tools.

BigSki

09-17-2017 04:43 PM

Re: micro hex driver

Wiha tools makes very nice precision tools in stupidly small sizes. I have a nut driver for 00-90 hardware, it fits perfectly.

svt923

09-18-2017 06:02 AM

Re: micro hex driver

MIP makes drivers as small as .9 mm.

The really small MIP drivers I have are definitely a more precise fit in the screws than my Wiha drivers of the same size.

JatoTheRipper

09-18-2017 11:57 AM

Re: micro hex driver

Quote:

Originally Posted by Natedog (Post 5749030)

Before I go searching do you know, offhand, if Wera makes small nut drivers that would be good for scale hardware?

Natedog

09-19-2017 01:52 PM

Re: micro hex driver

I don't know, but KCTool's site should list them or check Wera's site directly.

All times are GMT -6. The time now is 08:52 AM.