06-29-2005, 06:45 PM | #1 |
Newbie Join Date: Dec 2004
Posts: 3
| Newb E-Maxx questions
I am going to build an entry level crawler out of my e-maxx. I am not looking to go as far as custom chassis except a tube roll cage. I already order a spool for the front differential, beadlocks, swamp dawg tires, 10 tooth pinion and I am looking for a 44 tooth spur gear. I am going to buy a 55 turn lathe motor if I can find one. Is there anything else I would need to buy to make my e-maxx crawl better? What shocks are the best for crawling? Thanks in advance for the help. |
Sponsored Links | |
06-29-2005, 07:21 PM | #2 |
Pebble Pounder Join Date: Apr 2005 Location: i'm not sure
Posts: 117
|
Are you planning on locking out the ifs and irs in to a solid axle and four linking it?
|
06-29-2005, 07:31 PM | #3 |
Pebble Pounder Join Date: Mar 2005 Location: Not where I should be!
Posts: 135
|
Check here for the motor; http://www.integy.com/ They are out of stock at this time, but....... The maxx shocks work really good. Do a search in this section to find more specific information on the maxx. |
06-29-2005, 07:37 PM | #4 |
Newbie Join Date: Dec 2004
Posts: 3
|
I am just gonna replace the front diff. spider gears with the spool. thanks for the help.
|
06-29-2005, 07:38 PM | #5 |
Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo!
Posts: 8,626
|
why in the world are you only running a 44tooth spur gear? :? stock is 66 tooth. I would at least run a 72 spur gear.. 44 would defeat the purpose of a smaller pinion gear and lathe motor also... if you lock only one, you will raise havock with your driveline.. so lock both.. it wont matter anyway cause you will need a stronger steering servo for the front |
06-29-2005, 08:47 PM | #6 |
Newbie Join Date: Dec 2004
Posts: 3
|
I have an upgrade steering servo. what would I need for 4WS.
|
| |