01-27-2013, 07:57 AM | #1 |
Quarry Creeper Join Date: Oct 2011 Location: in the 7eventh level of hell
Posts: 314
| building a emaxx
hey guys. i have a few questions on this build. its going to be a bassher so no crawling here at all. it will most be for speed and ffof style performer. i have brushless motors lying around like the cc 5700 and the 7700 and cc esc like the mm, sidewinder, and sct. would i be better off running an original dual motor setup like the original emaxx does or should i go with the brushless. i know gearing will be an issue to. i have a few setups for that to. any help on this is much appreciated.
|
Sponsored Links | |
01-27-2013, 09:28 AM | #2 |
Quarry Creeper Join Date: Oct 2011 Location: in the 7eventh level of hell
Posts: 314
| Re: building a emaxx
im just looking for some pointers and a direction to take this.
|
01-27-2013, 09:40 AM | #3 |
Pebble Pounder Join Date: May 2011 Location: under a bridge
Posts: 190
|
Well the brushless setups you listed there are no good for a big heavy Maxx truck. If you want a foff rig, just go throw some sand paddles on it and call it done. Sent from my HTC POS tablet using Tapatalk 2 |
01-27-2013, 10:06 AM | #4 |
Quarry Creeper Join Date: Oct 2011 Location: in the 7eventh level of hell
Posts: 314
| Re: building a emaxx
really! i figured they could get the wheel speed up pretty good wth the right gearing.
|
01-27-2013, 03:36 PM | #5 |
Quarry Creeper Join Date: Oct 2011 Location: in the 7eventh level of hell
Posts: 314
| Re: building a emaxx need wheely pulln help
what would be a good bad ass wheely pulling setup for me. give me some options here.
|
01-27-2013, 10:19 PM | #6 |
Rock Crawler Join Date: Mar 2009 Location: East TN
Posts: 500
| Re: building a emaxx
run the cc set up thats in a e-revo or run two lower kv brushless systems. such as two traxxas vxl setups. thatll get you diggin in the hills
|
01-27-2013, 11:02 PM | #7 | ||
Pebble Pounder Join Date: May 2011 Location: under a bridge
Posts: 190
| Re: building a emaxx need wheely pulln help Quote:
Quote:
The brushless set ups are really the way to go! The new MMM is already waterproofed! They are happy on 4s and insane on 6s! | ||
01-28-2013, 07:33 PM | #8 |
Quarry Creeper Join Date: Oct 2011 Location: in the 7eventh level of hell
Posts: 314
| Re: building a emaxx
thanks for all the advice. at the result of sounding newbie, what is the MMM? pockets arent empty. im doing a piece at a time anyways. i just want this thing to run wicked. im talking wheely haven power out the wazoo mad.
|
01-28-2013, 08:28 PM | #9 |
Pebble Pounder Join Date: May 2011 Location: under a bridge
Posts: 190
| Re: building a emaxx
MMM= Mamba Monster Max It is made by Castle Creations. If that is the route that you are going get the newest version which is water proof. If wheelies is what you want, that is what you will get. |
01-28-2013, 09:25 PM | #10 |
Quarry Creeper Join Date: Oct 2011 Location: in the 7eventh level of hell
Posts: 314
| Re: building a emaxx
I thought thats what you ment. What would be a killer brushless motor to run with and what voltage lipo should i go with.
|
01-28-2013, 09:44 PM | #11 |
Pebble Pounder Join Date: May 2011 Location: under a bridge
Posts: 190
| Re: building a emaxx
Get the MMM/2200 combo and call it good. As far as LiPos get at least some 30c to stay on the safe side of things. If it were me, I would mix it up and get some 2s and some 3s batteries. That gives the possibility of running 4s, 5s and 6s. Just so you know 6s is evil! |
01-28-2013, 10:01 PM | #12 |
Rock Crawler Join Date: Oct 2011 Location: Vertical Junkie
Posts: 945
| Re: building a emaxx
I have a bushless Emaxx for sale here........Its old skool w/ 2speed tranny but is geared bout right for what you want... LMK.
|
01-29-2013, 07:14 AM | #13 |
Quarry Creeper Join Date: Oct 2011 Location: in the 7eventh level of hell
Posts: 314
| Re: building a emaxx
I just bought two emaxx 3906's i believe. One is one its way. Its got the 14v dual 12t. The other i anready have. It has some crappy motor on it. Junk. With no esc
|
01-29-2013, 10:18 AM | #14 |
Pebble Pounder Join Date: May 2011 Location: under a bridge
Posts: 190
|
Well let's see soe pictures! Sent from my HTC POS tablet using Tapatalk 2 |
01-29-2013, 04:13 PM | #15 |
Quarry Creeper Join Date: Oct 2011 Location: in the 7eventh level of hell
Posts: 314
| Re: building a emaxx
give me a min.
|
building a emaxx - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Anyone still building emaxx crawler? | gary | Traxxas Crawlers | 19 | 09-25-2013 02:25 PM |
Emaxx Help | CrawlerX | Newbie General | 5 | 01-09-2008 06:53 AM |
| |