07-05-2007, 01:54 PM | #1 |
Rock Crawler Join Date: Jul 2007 Location: E LEE, NV
Posts: 589
| maxx questions
where is the best spot to mount the servos i have maxx solid axles locked to there full droop (highest clearance) cant seem to get tie rods to work right so i get full steering left to right.... i two servos (144 oz) would it be better to use two for the front (left and right) or (front and rear) the bad thing is im a low budget builder and in the middle of nowhere (no parts around) please help |
Sponsored Links | |
07-05-2007, 02:31 PM | #2 |
Quarry Creeper Join Date: Mar 2005 Location: Florida
Posts: 216
|
That was the toughest thing for me. I ended up lowering the axles just enough and dremeled out the bulkhead to clear the draglink. You almost have to put the servo up front on the bulkhead. I wish you could use a behind the axle cable steering system and chassis mount that servo. Last edited by RCHunter; 07-05-2007 at 02:35 PM. |
07-05-2007, 03:08 PM | #3 |
Rock Crawler Join Date: Jul 2007 Location: E LEE, NV
Posts: 589
|
if anyone has good pics id appreciate it (i'm not afraid to do some cutting!!)
|
07-05-2007, 03:41 PM | #4 |
Quarry Creeper Join Date: Mar 2005 Location: Florida
Posts: 216
| |
| |